CAI, HF cats, rotofab bottle, scoop, UD pulley, 63lb injectors - UPDATED - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

caper · 10-13-2013, 05:56 PM

So, you have an SS and you are thinking "I want more HP, I want more sound!, I want to be as bad ass as possible and keep my warranty! and i want to pull hot ladies!"

wellllllll, look no further fellas, I have the gear you need, and you can simply hand me some cash and pick it up! install this stuff, you will smile! and so will the ladies at your new found power! if you have a lady already it will make her happy too! So what is it all you say, what does Caper have that will make me smile so much!?

CAI intake - a few marks on the box part, but the pipe is likenew, filter is in good shape as well. - you will need to add the hose to go into the intake tube - 150.00 SOLD

Rotofab washer bottle - looks great paired up with the CAI - the little Plug that goes in the bottom will need to be replaced (goes over the stud, the washer bottle sits on it) - 70.00

CAI scoop - great shape - 50.00

SLP Under drive pulley - you will need belts and bolt - comes with a bolt but its suggested you use a new one i believe - 150.00 SOLD

JBA high flow cats - the best mod i did to my car, work fine - will need gaskets to install (cheap) - 175.00 SOLD

any bolts/nuts etc need to instal you will have to provide, the shop that removed them didnt keep them and I wasnt there at the time. I have install instructions for some (most) of this stuff, I will dig them up and include them.

So why am I selling all this wonderful stuff? I went turbo so it was all removed. and now youre thinking what is the price? I will glady pay him whatever he desires! well youre in luck! all I am asking is 500.00 for all this! so come get it fellas, and make your car the way it was meant to be!

or I will separate , prices are added

also have a set of 63lb injectors 150.00 , bosch injectors that came with my turbo kit, about 15k on them. replaced with FIC850, if interested pm me on them.

CamaroCK · 10-13-2013, 05:58 PM

What color is the intake? And if you have some pics of the marks on it that would be great

caper · 10-13-2013, 06:04 PM

i have pics, i will post later today, i will be sure to take pics of the marks

CamaroCK · 10-13-2013, 06:13 PM

Sounds good, thanks

EVERETTDREW · 10-13-2013, 06:19 PM

Sent PM

caper · 10-13-2013, 08:32 PM

heres the pics, the scratches/marks are on the side of the intake box that faces the engine and faces the rear. the top looks fine. not even sure how the scratches got there actually

caper · 10-13-2013, 08:34 PM

actually i think the scratches on the part facing the rear are from the washer bottle rubbing, not sure on the part facing the engine.

EVERETTDREW · 10-14-2013, 12:36 PM

I just noticed the price. Thats a really good deal. Wish I had the cash.

caper · 10-18-2013, 03:47 PM

Bump This Mofo

zSHOWTIMEz · 10-21-2013, 07:13 AM

pics of the high flow cats

caper · 10-21-2013, 09:33 AM

would you like different pics of them then the ones posted?

christianmotox · 10-22-2013, 01:29 AM

Did you get a check engine with those CATS?

caper · 10-22-2013, 12:32 PM

Yeah I Did, Some Do, some Don't. I Had Extenders On There Too. They Got Ruud Of The Code On 1 Bank But Not The Other.

caper · 10-22-2013, 12:33 PM

They Were So Awesome Though, It Didn'tBother Me.

10-13-2013, 05:56 PM	#1
caper Drives: 2010 IOM 2ss/RS Join Date: Sep 2009 Location: SoCal, I.E. Posts: 1,546	CAI, HF cats, rotofab bottle, scoop, UD pulley, 63lb injectors - UPDATED So, you have an SS and you are thinking "I want more HP, I want more sound!, I want to be as bad ass as possible and keep my warranty! and i want to pull hot ladies!" wellllllll, look no further fellas, I have the gear you need, and you can simply hand me some cash and pick it up! install this stuff, you will smile! and so will the ladies at your new found power! if you have a lady already it will make her happy too! So what is it all you say, what does Caper have that will make me smile so much!? CAI intake - a few marks on the box part, but the pipe is likenew, filter is in good shape as well. - you will need to add the hose to go into the intake tube - 150.00 SOLD Rotofab washer bottle - looks great paired up with the CAI - the little Plug that goes in the bottom will need to be replaced (goes over the stud, the washer bottle sits on it) - 70.00 CAI scoop - great shape - 50.00 SLP Under drive pulley - you will need belts and bolt - comes with a bolt but its suggested you use a new one i believe - 150.00 SOLD JBA high flow cats - the best mod i did to my car, work fine - will need gaskets to install (cheap) - 175.00 SOLD any bolts/nuts etc need to instal you will have to provide, the shop that removed them didnt keep them and I wasnt there at the time. I have install instructions for some (most) of this stuff, I will dig them up and include them. So why am I selling all this wonderful stuff? I went turbo so it was all removed. and now youre thinking what is the price? I will glady pay him whatever he desires! well youre in luck! all I am asking is 500.00 for all this! so come get it fellas, and make your car the way it was meant to be! or I will separate , prices are added also have a set of 63lb injectors 150.00 , bosch injectors that came with my turbo kit, about 15k on them. replaced with FIC850, if interested pm me on them. __________________ Turbonetics running 8lbs boost at 700rwhp tuned by Hi Rev, installed by K&M w/cat-muffler delete, ACS splitter, Fesler GFX, MPD1 spoiler, Custom painted Rally stripes, Cordon CR1 wheels 275/315s, Hotchkiss comp sways and end links, Barton shifter Last edited by caper; 07-26-2014 at 02:34 PM. Reason: prices added and updated

10-13-2013, 05:58 PM	#2
CamaroCK SoCal HT5 Drives: 2013 VR 2SS/RS Join Date: May 2010 Location: Northridge, CA Posts: 344	What color is the intake? And if you have some pics of the marks on it that would be great __________________

10-13-2013, 06:04 PM	#3
caper Drives: 2010 IOM 2ss/RS Join Date: Sep 2009 Location: SoCal, I.E. Posts: 1,546	i have pics, i will post later today, i will be sure to take pics of the marks __________________ Turbonetics running 8lbs boost at 700rwhp tuned by Hi Rev, installed by K&M w/cat-muffler delete, ACS splitter, Fesler GFX, MPD1 spoiler, Custom painted Rally stripes, Cordon CR1 wheels 275/315s, Hotchkiss comp sways and end links, Barton shifter

10-13-2013, 06:13 PM	#4
CamaroCK SoCal HT5 Drives: 2013 VR 2SS/RS Join Date: May 2010 Location: Northridge, CA Posts: 344	Sounds good, thanks __________________

10-13-2013, 08:32 PM	#6
caper Drives: 2010 IOM 2ss/RS Join Date: Sep 2009 Location: SoCal, I.E. Posts: 1,546	heres the pics, the scratches/marks are on the side of the intake box that faces the engine and faces the rear. the top looks fine. not even sure how the scratches got there actually Attached Images __________________ Turbonetics running 8lbs boost at 700rwhp tuned by Hi Rev, installed by K&M w/cat-muffler delete, ACS splitter, Fesler GFX, MPD1 spoiler, Custom painted Rally stripes, Cordon CR1 wheels 275/315s, Hotchkiss comp sways and end links, Barton shifter

10-13-2013, 06:19 PM	#5
EVERETTDREW Drives: 2010 Camaro SS Join Date: Jul 2013 Location: Inland Empire Posts: 42	Sent PM

10-13-2013, 08:34 PM	#7
caper Drives: 2010 IOM 2ss/RS Join Date: Sep 2009 Location: SoCal, I.E. Posts: 1,546	actually i think the scratches on the part facing the rear are from the washer bottle rubbing, not sure on the part facing the engine. __________________ Turbonetics running 8lbs boost at 700rwhp tuned by Hi Rev, installed by K&M w/cat-muffler delete, ACS splitter, Fesler GFX, MPD1 spoiler, Custom painted Rally stripes, Cordon CR1 wheels 275/315s, Hotchkiss comp sways and end links, Barton shifter

10-14-2013, 12:36 PM	#8
EVERETTDREW Drives: 2010 Camaro SS Join Date: Jul 2013 Location: Inland Empire Posts: 42	I just noticed the price. Thats a really good deal. Wish I had the cash.

10-18-2013, 03:47 PM	#9
caper Drives: 2010 IOM 2ss/RS Join Date: Sep 2009 Location: SoCal, I.E. Posts: 1,546	Bump This Mofo __________________ Turbonetics running 8lbs boost at 700rwhp tuned by Hi Rev, installed by K&M w/cat-muffler delete, ACS splitter, Fesler GFX, MPD1 spoiler, Custom painted Rally stripes, Cordon CR1 wheels 275/315s, Hotchkiss comp sways and end links, Barton shifter

10-21-2013, 07:13 AM	#10
zSHOWTIMEz So Cal Invasion Drives: 2011 2SS RS PACKAGE Join Date: Aug 2012 Location: Los Angeles Posts: 246	pics of the high flow cats __________________

10-21-2013, 09:33 AM	#11
caper Drives: 2010 IOM 2ss/RS Join Date: Sep 2009 Location: SoCal, I.E. Posts: 1,546	would you like different pics of them then the ones posted? __________________ Turbonetics running 8lbs boost at 700rwhp tuned by Hi Rev, installed by K&M w/cat-muffler delete, ACS splitter, Fesler GFX, MPD1 spoiler, Custom painted Rally stripes, Cordon CR1 wheels 275/315s, Hotchkiss comp sways and end links, Barton shifter

10-22-2013, 01:29 AM	#12
christianmotox Drives: ( . )( . ) Join Date: Feb 2010 Location: San Diego, CA Posts: 2,827	Did you get a check engine with those CATS? __________________

10-22-2013, 12:32 PM	#13
caper Drives: 2010 IOM 2ss/RS Join Date: Sep 2009 Location: SoCal, I.E. Posts: 1,546	Yeah I Did, Some Do, some Don't. I Had Extenders On There Too. They Got Ruud Of The Code On 1 Bank But Not The Other. __________________ Turbonetics running 8lbs boost at 700rwhp tuned by Hi Rev, installed by K&M w/cat-muffler delete, ACS splitter, Fesler GFX, MPD1 spoiler, Custom painted Rally stripes, Cordon CR1 wheels 275/315s, Hotchkiss comp sways and end links, Barton shifter

10-22-2013, 12:33 PM	#14
caper Drives: 2010 IOM 2ss/RS Join Date: Sep 2009 Location: SoCal, I.E. Posts: 1,546	They Were So Awesome Though, It Didn'tBother Me. __________________ Turbonetics running 8lbs boost at 700rwhp tuned by Hi Rev, installed by K&M w/cat-muffler delete, ACS splitter, Fesler GFX, MPD1 spoiler, Custom painted Rally stripes, Cordon CR1 wheels 275/315s, Hotchkiss comp sways and end links, Barton shifter