Mods so far on my victory red 2013 LS - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

witheringsanity · 10-25-2013, 08:04 AM

Finally got up to posting a thread with all the mods I've done so far. Looking for thoughts or suggestions on how it looks and what I might change or add.

Here's the car how I bought it in December

New wheels and tires, hankook ventus v12 on 20" enkai's

Carbon fiber bow ties

Front facia blackout and hood spears with plastidip

Leather grain vinyl on interior trim ( sadly, the adhesive didn't stay on the curved part so it's kinda like an air cushion). My metra kit and kenwood stereo can also be seen. It looks orange in the sun, but it's almost exactly the same color as the car

Dyed stitching from stone to red

Side accents

Hood emblem (not sure if I like it, pus its a bit off-center). I was thinking of going with a tribal dragon or Phoenix instead (my wife said "what is it, 1995?" LOL) , to take up more of the hood and look better, let me know what you think.

These are just examples, not my actual picks for the design

And that's pretty much it so far. I'm planning on adding gm high wing spoiler, razzi side skirts, gm rear diffuser and ZL1 front bumper ( eventually ). Halos with HID will probably be my next mod. I'm totally open to people's honest opinions so let me know what you guys think. Thanks

Sent from my iPad using Tapatalk

SoCalCamaro93 · 10-25-2013, 08:24 AM

Very nice. Good choice deciding to switch out the rims

Not a fan of the hood decal, but it's not my car. If you wanna fill the space on the hood, why not hex vents?

Jalberdi99 · 10-25-2013, 08:47 AM

Quote:

Originally Posted by SoCalCamaro93

Very nice. Good choice deciding to switch out the rims

Not a fan of the hood decal, but it's not my car. If you wanna fill the space on the hood, why not hex vents?

BAD DAB · 10-25-2013, 08:50 AM

Nice!

TwentyTen2SSRS · 10-25-2013, 02:17 PM

Looking good. I have Razzi sides and front and love them. Car looking great!

Where did you get leather grain vinyl from? Do you have a link?

Sent from my iPhone using Tapatalk 2

2010 SSRS · 10-25-2013, 02:20 PM

great mods, your Camaro looks real good

matthew9440 · 10-25-2013, 03:15 PM

Interesting take on the door panels. I like it!

witheringsanity · 10-27-2013, 09:13 AM

Quote:

Originally Posted by 2013BlackLS

Looking good. I have Razzi sides and front and love them. Car looking great!

Where did you get leather grain vinyl from? Do you have a link?

Sent from my iPhone using Tapatalk 2

bought it at joanne fabrics. if you dont have a store close by im sure they have an online store.

TwentyTen2SSRS · 10-27-2013, 12:21 PM

Quote:

Originally Posted by witheringsanity

bought it at joanne fabrics. if you dont have a store close by im sure they have an online store.

Thanks we have them here also. Do you know the style r name of it? I am looking for same but in a royal blue

Sent from my iPhone using Tapatalk 2

witheringsanity · 10-30-2013, 08:55 PM

Quote:

Originally Posted by 2013BlackLS

Thanks we have them here also. Do you know the style r name of it? I am looking for same but in a royal blue

Sent from my iPhone using Tapatalk 2

I think it's called marine vinyl. Sadly I don't think they had royal blue, or many colors at all. It's not really the best material since it's quite thick and hard to use. You could probably find some online that's better suited

Sent from my iPad using Tapatalk

kevinw · 10-30-2013, 10:04 PM

everything looks great except the hood decal. dont like it but everything else you did really looks great!

witheringsanity · 11-01-2013, 10:07 AM

Quote:

Originally Posted by kevinw

everything looks great except the hood decal. dont like it but everything else you did really looks great!

thanks!

Ashley@HPE · 12-01-2013, 01:29 PM

Quote:

Originally Posted by SoCalCamaro93

Very nice. Good choice deciding to switch out the rims

Not a fan of the hood decal, but it's not my car. If you wanna fill the space on the hood, why not hex vents?

They'll fill the space, and extract heat!

Jenner · 12-01-2013, 01:42 PM

I have the exact same car. I plasti dipped the spoiler too. I want to do a matte black hood with red spears. . And how did you dye the stitching

10-25-2013, 08:04 AM	#1
witheringsanity Drives: 2013 1LS - Victory Red Join Date: Nov 2012 Location: Delaware Posts: 47	Mods so far on my victory red 2013 LS Finally got up to posting a thread with all the mods I've done so far. Looking for thoughts or suggestions on how it looks and what I might change or add. Here's the car how I bought it in December New wheels and tires, hankook ventus v12 on 20" enkai's Carbon fiber bow ties Front facia blackout and hood spears with plastidip Leather grain vinyl on interior trim ( sadly, the adhesive didn't stay on the curved part so it's kinda like an air cushion). My metra kit and kenwood stereo can also be seen. It looks orange in the sun, but it's almost exactly the same color as the car Dyed stitching from stone to red Side accents Hood emblem (not sure if I like it, pus its a bit off-center). I was thinking of going with a tribal dragon or Phoenix instead (my wife said "what is it, 1995?" LOL) , to take up more of the hood and look better, let me know what you think. These are just examples, not my actual picks for the design And that's pretty much it so far. I'm planning on adding gm high wing spoiler, razzi side skirts, gm rear diffuser and ZL1 front bumper ( eventually ). Halos with HID will probably be my next mod. I'm totally open to people's honest opinions so let me know what you guys think. Thanks Sent from my iPad using Tapatalk

10-25-2013, 08:24 AM	#2
SoCalCamaro93 Drives: 2016 2SS, 2011 RS (past) Join Date: Aug 2011 Location: The Central Coast Posts: 909 View My Garage	Very nice. Good choice deciding to switch out the rims Not a fan of the hood decal, but it's not my car. If you wanna fill the space on the hood, why not hex vents? __________________ Past: 2011 RS, 2013 ZL1 Current: 2016 2SS

10-25-2013, 08:50 AM	#4
BAD DAB Drives: 2010 Camaro 2SS/RS Black & Silver Join Date: Aug 2010 Location: Richmond, VA Posts: 8,228 View My Garage	Nice! __________________ STAINLESS WORKS HEADERS-TUNED BY JANNETTY RACING-C.A.I. INTAKE-TAYLOR 409 WIRES-SOLO AXLE BACK EXHAUST-ELITE CATCH CAN

10-25-2013, 02:17 PM	#5
TwentyTen2SSRS Drives: 2010 2SS/RS Join Date: Apr 2013 Location: Seattle, WA Posts: 3,972 View My Garage	Looking good. I have Razzi sides and front and love them. Car looking great! Where did you get leather grain vinyl from? Do you have a link? Sent from my iPhone using Tapatalk 2 __________________ Cold Air Inductions CAI • Stainless Power LT's with HFC's • Flowmaster American Thunder Cat Back • APEX Scoop and WW Relocation Kit • VMAX Ported Throttle Body • Custom Dyno Tune • Pfadt 1.25" Lowering Springs • ZL1 Rims on 275 front 315 Rear • custome underlay vinyl wrap • Anvil Spoiler • heritage grill • APR Front Splitter • Custom Emblempros emblems • ZL1 Side Skirts • 416.5 whp 410 torque (CURRENTLY) Up Next: BTR Stage 3 Cam and supporting mods (in garage now)

10-25-2013, 02:20 PM	#6
2010 SSRS Drives: 3 V8 Camaros Join Date: May 2009 Location: The Ocean State Posts: 111,187 View My Garage	great mods, your Camaro looks real good __________________ Jannetty Racing JRE Street Package

10-25-2013, 03:15 PM	#7
matthew9440 Drives: 2010 Camaro 2SS/RS Join Date: Aug 2012 Location: DuBois, PA Posts: 1,038 View My Garage	Interesting take on the door panels. I like it! __________________

10-30-2013, 10:04 PM	#11
kevinw Drives: 2013 Black 2 LT vert Join Date: Jul 2013 Location: kansas city Posts: 1,765	everything looks great except the hood decal. dont like it but everything else you did really looks great!

12-01-2013, 01:42 PM	#14
Jenner Drives: 2012 SS/RS Join Date: Jul 2013 Location: Placentia, CA Posts: 2,130	I have the exact same car. I plasti dipped the spoiler too. I want to do a matte black hood with red spears. . And how did you dye the stitching