11-29-2013, 01:27 PM | #1 |
Drives: 2013 Camaro ZL1, 2013 Camaro SS Join Date: Oct 2011
Location: Illinois
Posts: 32
|
ZL1 Carbon Fiber Insert Problem
Hello,
We have a 2013 Camaro ZL1 and the carbon fiber insert is de-laminating, I went to the dealership and they told me they were going to send it to their body shop and repair it, instead of replace it. Does anyone know if that is even possible? How I was explained about it is that once that begins to happen it can only be replaced. Also I wasn't sure if the clear coat on the insert is the same one on ZR1's that is mega bucks. Please let me know your opinions. |
11-29-2013, 01:32 PM | #2 |
Reaper Crew
Drives: Blown 2010 Camaro SS Join Date: Aug 2012
Location: Indiana
Posts: 985
|
I would never accept a dealer body shop to try to "fix" it. I worked at a Chevy dealer body shop...and we never even attempted to fix any type of carbon fiber parts.
I would demand a new insert for sure
__________________
2010 Camaro SS SLP TVS2300 Blower, Blower Cam, Lingenfelter Heads, Meth Injected, 5lbs of Boost@700 BHP Pedders XA Coilovers |
11-29-2013, 01:34 PM | #3 |
Drives: 2013 Camaro ZL1, 2013 Camaro SS Join Date: Oct 2011
Location: Illinois
Posts: 32
|
Yea I work at a body shop they all said no way... and here I have these guys wanting to try to fix it my opinion is if you think its fixable send it back to the manufacturer and have them fix it and put a new one on mine....
|
11-29-2013, 01:35 PM | #4 |
Older Than Dirt
Drives: 2010 & 2013 Camaros Join Date: Apr 2010
Location: Aiken, SC
Posts: 4,566
|
If it's delaminating, I don't think there's much that CAN be done to stop it. Fixing it will likely be a FAIL. Even if they recleared it, the delamination won't stop.
Campaign for a new replacement.
__________________
2010 2SS TE, 1 of 822/2013 Camaro ZL1 vert, 1 of 54
|
11-29-2013, 01:45 PM | #5 |
Drives: 13 ZL1 #493-13 road glide Join Date: Oct 2010
Location: pittsburgh
Posts: 111
|
argeed...from the few ive seen in the past there were replaced as a warrenty item.
__________________
stainless works 2in headers: 20% tint: rotofab CAI: 18% ATI: ID850's: tuned by JRE
|
11-29-2013, 02:35 PM | #6 |
Drives: 2014 ZL1m6 red hot #569 Join Date: Dec 2009
Location: florida
Posts: 2,422
|
get it replaced. its a known problem. ive had 4 counting the one the car came with in 30k miles
|
11-29-2013, 03:15 PM | #7 |
Drives: 2018 ZL1/1LE Red Join Date: Oct 2013
Location: Cumming, GA
Posts: 321
|
My opinion. I'd accept nothing other than a replaced piece. (Considering the lamination process itself, I am not sure it is even possible). I'm sure some thing it may be similar to a base/clear (clear over) repair, which it is far-far from that.
__________________
BobR
2018 ZL1 1LE (Red) - New Dec 2017 2015 ViperGT (Gunmetal w/Red stripes) 2013 ZR1 Anniversary 2014 ZL1 - BrightYellow, 6sp 2011 Porsche GT3RS - White w/red graphics 2009 Porsche C2S 2001 Ferrari 360 Last edited by kaamacat; 11-29-2013 at 03:19 PM. Reason: added lamination process item |
11-29-2013, 07:43 PM | #8 |
Native Floridian
Drives: 2014 - ZL1 / 2003 - Corvette Join Date: Oct 2013
Location: FLORIDA
Posts: 2,663
|
Tell the dealer that you want to meet with the Chevrolet District Service Manager for their dealership.
|
11-30-2013, 09:29 AM | #9 | |
Drives: ZL1 Convertible Join Date: Aug 2012
Location: Chicago, IL
Posts: 484
|
Quote:
I imagine the dealer was sending the car to the shop to replace the insert . . . |
|
11-30-2013, 01:35 PM | #10 |
Drives: 2013 zl1 Join Date: Dec 2012
Location: ofallon il
Posts: 126
|
whem i ordered my z last year i couldn't get carbon fiber insert. well i guess i could but would have had to wait. they where having issues with the carbon hood this may have been the issue.
|
11-30-2013, 01:42 PM | #11 |
XLR8TNG
Drives: 2013 Camaro ZL1 Join Date: Dec 2012
Location: Calgary,Ab
Posts: 371
|
After seeing all the issues with the exposed hood insert I am super glad I ordered mine last year with the painted Ashen Grey! No regrets here.
|
11-30-2013, 10:18 PM | #12 |
Drives: 2013 Camaro ZL1, 2013 Camaro SS Join Date: Oct 2011
Location: Illinois
Posts: 32
|
No I meant the insert they want to repair the carbon fiber insert I think they should replace it, I dont think that it is even repairable.
|
12-01-2013, 08:44 AM | #13 |
Drives: 2014 ZL1m6 red hot #569 Join Date: Dec 2009
Location: florida
Posts: 2,422
|
it is not repairable. they will replace it and when they do make sure they don't damage the hood paint like they did on mine. last round had to have whole hood painted because when they pryed the insert out they scratched and chipped my paint.
|
|
|
|
|