01-30-2014, 03:58 PM | #1 |
Drives: 2018 2LT/RS Conv Join Date: Jun 2013
Location: Wilmington NC
Posts: 317
|
Build sheets?
Has anybody been able to find the build sheet on their Camaro? I understand that this sheet follows the car through the production line so each station knows what options to install. I have heard that a lot of the time these sheets are then attached to some out-of-the-way place like under one of the seats. I have not found one on my '13; has anybody else found one? In 30 years the possession of that sheet makes the car much more valuable (according to Barrett-Jackson).
|
01-30-2014, 04:07 PM | #2 |
Scott's45
Drives: 2012 2SS 45th Anniversary Join Date: Mar 2012
Location: New Hampshire
Posts: 556
|
There was something in the trunk when I picked it up at the dealer. Looked like a computer printout with all the options I picked, I think. It was on pin-feed paper, maybe 11 x 14" in size. Had my VIN in the upper right corner. If I had a scanner, I'd scan it and put it on here so you can see.
__________________
2012 2SS 45th Anniversary, Hurst short throw shifter, Stainless Power LT headers, high flow cats, SW Retro Chambered 3" cat back, CAI, Heritage grill, tinted windows, red/silver hash stripes, AAC LED sidemarkers, blacked out turn signals/tail lights, splash guards. 402RWHP
|
01-30-2014, 04:09 PM | #3 |
Drives: IOM 2013 2SS/RS, Greenie, 06 FXSTBi Join Date: Apr 2009
Location: Turd Town, WI
Posts: 1,591
|
My salesman scooped all papers upon delivery from my 2010 and 2013 and put them in an envelope for me. It is something you would likely have to request prior to delivery. Most often, they are just tossed out during PDI at the dealer.
|
01-30-2014, 04:38 PM | #4 |
Drives: 15 JKU, 00 S10, 73 Vette, 12 JK Join Date: Jan 2014
Location: garage
Posts: 370
|
|
01-30-2014, 04:41 PM | #5 |
Drives: Synergy Green 2SS/RS/HURST Join Date: Aug 2010
Location: Saratoga Springs, NY
Posts: 442
|
They are likely gone like mine. Even after I told the dealer not to they still chucked them. There were I believe 3 pages. They're usually left one in the trunk and one each in the door pocket for the left & right side of the interior. It is the one thing that to this day over 3 years later infuriates me about my car. Yes, I was able to get copies from Becky at Rogers Chevrolet but it's not the ones from the factory that went down the line with the car. It's the one thing that every once in a while makes me want to sell it off.
__________________
2011 2SS/RS - Factory Hurst - Synergy Green - Cyber Gray Rally Stripes - Jet Black Interior - Born on 10/4/2010
2G1FT1EW7B9128807 Ordered: 8/6/2010 1100: 8/6/2010 2000: 8/23/2010 2051: 8/10/2010 2500: 8/24/2010 3000: 8/25/2010 3100: 9/8/2010 3300: 9/8/2010 3400: 9/11/2010 3800: 10/4/2010 4000: 10/4/2010 4200: 10/4/2010 5000: 10/13/2010 6000: 10/14/2010 |
01-30-2014, 05:23 PM | #6 |
Drives: 2013 2ss vert Join Date: Sep 2013
Location: grand blanc mi
Posts: 244
|
yep its up to the salesman to save them from the trash. Mine did and am thankful for it
|
01-30-2014, 05:33 PM | #7 |
Drives: 2018 2LT/RS Conv Join Date: Jun 2013
Location: Wilmington NC
Posts: 317
|
Darn, I wish I had thought about this before I picked up the car. I did tell them that I definitely wanted the window sticker IN TACT and still on the window when I picked it up so I could remove it myself. I was told that it is state law (in NC) that the buyer gets the window sticker, but I never thought about the build sheet. Someone give me more details as to how I can get a copy of it from GM. Thanks.
|
01-30-2014, 05:34 PM | #8 |
Drives: 2018 2LT/RS Conv Join Date: Jun 2013
Location: Wilmington NC
Posts: 317
|
|
01-30-2014, 05:45 PM | #9 |
Drives: 2014 1LE & 2014 C7 Join Date: May 2011
Location: DFW
Posts: 742
|
|
01-30-2014, 05:54 PM | #10 |
Drives: 2014 Camaro SS/RS 1LE 1967 Camaro Join Date: Oct 2013
Location: Fort Wayne, IN
Posts: 873
|
Lucked out and my sales guy, 60 ish, happened to be into corvettes and camaros. Has a few of his own. He gathered up all the paperwork as soon as it came in and placed it in a folder for me.
|
01-30-2014, 07:14 PM | #11 |
Drives: 2014 camaro ss ,1967 chevelle ss, Join Date: Sep 2013
Location: loganville
Posts: 1,209
|
that's right you have to ask sales man to get them before detail gets car ready
__________________
|
01-30-2014, 07:55 PM | #12 |
Drives: 2013 Hot Wheels 2SS Join Date: Jan 2014
Location: San Antonio, TX
Posts: 20
|
I found these in my trunk. Are they build count sheets?
|
01-30-2014, 08:08 PM | #13 |
Drives: 2014 camaro ss ,1967 chevelle ss, Join Date: Sep 2013
Location: loganville
Posts: 1,209
|
that's not really a build sheet but it's kinda cool stuff. my sheet is about the same size as the window sticker and has a grid on I with all the codes for whatever the car got such as npp and a lot of other code and vin,color,trim etc.. there's also a sticker under trunk mat on driver's side that I think tells the same thing but I haven't read it close yet
__________________
|
01-31-2014, 09:46 AM | #14 |
High-tech Redneck
Drives: '10 CGM SS, '02 2500HD, '09 300SRT8 Join Date: Nov 2010
Location: Lexington, KY
Posts: 757
|
you were expecting something like this from our GTO?
__________________
"My friends call me Chris. Are you my friend?"
2010 CGM L99 2SS/RS - GPI SS3 VVT, BTR DoD Delete, Circle D 4c, BTR springs, Katech C5R Timing Chain, MRR-228 315/275, CAI, Elite catch-can, TSP 1 7/8" Headers + offroad pipes, Magnaflow 3", Pfadt springs, BMR LCAs, toelinks, trailing arms, cradle bushings, & sway bars w/ endlinks, Vitesse paddles, heritage grille, and an eBay splitter. Power upgrades by Race Proven Perf.; Tuning by ShorTuning. |
|
|
|
|