How is rear bowtie attached? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

SSCamaro2010 · 07-24-2009, 03:39 PM

Is the rear bowtie stamped into the car or is it adheasive???

PAUL SS · 07-24-2009, 03:40 PM

I heard that if you take it off there two holes underneath it....

RoyalKev · 07-24-2009, 03:46 PM

Adhesive and there are two pins also so if you take it off theres going to be holes.

Hylton · 07-24-2009, 03:53 PM

Quote:

Originally Posted by RoyalKev

Adhesive and there are two pins also so if you take it off theres going to be holes.

Exactly. Use a plastic spatula to remove it. This will ensure you do not damage the paint. Crefully work your way around the emblem - do not pry from one spot. The holes are there to ensure that the emblem goes on correctly. The holes are not large but are fairly spread out so in order to make it look right, I had to weld mine up in order to put the rear "SS" emblem from an Impala SS on my car.

ahart04 · 07-24-2009, 04:18 PM

Quote:

Originally Posted by Hylton

I had to weld mine up in order to put the rear "SS" emblem from an Impala SS on my car.

quick pic of that, pretty pls?

Hylton · 07-24-2009, 04:22 PM

Quote:

Originally Posted by ahart04

quick pic of that, pretty pls?

I don't have a close up unfortunately but the SS emblem shown here is too small to cover both holes:

"prima"Donna · 07-24-2009, 05:18 PM

I love the bowties on the front and back

Just my opinion................

07-24-2009, 03:39 PM	#1
SSCamaro2010 Drives: 2010 Camaro 1ss/rs Join Date: Mar 2009 Location: Kenosha/wi Posts: 280	How is rear bowtie attached? Is the rear bowtie stamped into the car or is it adheasive???

07-24-2009, 03:40 PM	#2
PAUL SS The Mark of Excellence Drives: 2010 ABM 1SS RS LS3 Join Date: Jan 2009 Location: Smallest State in the Union Posts: 8,688 View My Garage	I heard that if you take it off there two holes underneath it.... __________________ BMR, CAI, DynoMax, Elite Eng., Hurst, Jannetty, Clear Image Headers & Hi Flow cats, Jet Hot, LSR, TSW, VMax, Vredestein

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
V6 Camaro Performance Upgrades	rtcat600man	Camaro V6 LLT Engine, Exhaust, and Bolt-Ons	387	09-19-2019 07:53 PM
Colored rear bowtie and truck blackout	Tonka	Camaro Photoshops / Renderings Forum	2	07-27-2009 01:38 PM
How is the rear bowtie attached?	VenomZ302	Cosmetics and Lighting Modification Discussions	4	07-10-2009 11:03 PM
Chevy bowtie "Big pimple" on the rear end	lnsjr1	Cosmetics and Lighting Modification Discussions	72	05-22-2009 08:42 AM
Zeta (Camaro/Commodore/G8) suspension details	Gatecrasher	Wheels and Tires Talk Sponsored by The Tire Rack	66	04-16-2009 02:11 PM

07-24-2009, 03:46 PM	#3
RoyalKev Drives: 2010 Camaro SS Join Date: Jan 2009 Location: Maryland Posts: 973	Adhesive and there are two pins also so if you take it off theres going to be holes.

07-24-2009, 05:18 PM	#7
"prima"Donna HWAY STR Drives: 2010 RJT VIN#7085 & 2014 CRT C7 Join Date: May 2009 Location: New York Posts: 13,118 View My Garage	I love the bowties on the front and back Just my opinion................