02-09-2014, 11:52 PM | #1 |
semi loud static buzz whenever I use turn signals or seatbelt sound goes off?
I got some aftermarket speakers and an amp to power them in my car. However, whenever the radio is off, if my seatbelt noise goes off or if I use my turn signals, I can hear a loud static start, and it goes away seconds after the sound stops or I put my turn signal back to default.
Just wondering why this is happening and how to stop it. Can't tell exactly what speaker(s) is making the sound because it usually happens when I'm driving so I'm not in a position to put my ears next to speakers. It's not super loud, but noticeable when the radio is off. the amp is a JL 300/4v2 and the speakers are JL C5-650's. Got them professionally installed.
__________________
Ark N-II catback exhaust, ZL1 bumper, JL C5 comps, JL 10w7, JL 500/1v2, JL 300/4v2
|
|
02-12-2014, 02:14 AM | #2 |
anyone?
__________________
Ark N-II catback exhaust, ZL1 bumper, JL C5 comps, JL 10w7, JL 500/1v2, JL 300/4v2
|
|
02-13-2014, 03:49 PM | #3 |
Drives: 2011 2SS/RS Victory Red Join Date: Aug 2011
Location: Virginia
Posts: 921
|
This is the DC signal from the head unit for chimes buzzers etc. You can replace the head unit with aftermarket, or work on the gains until it is almost inaudible but as long as you have the factory head unit it will be there.
__________________
Updates: BTR Stage 2 VVT Cam Kit w/Smith Brothers Trunnions, Fluidampr, RX catch can, B&M Trans pan mod, Kooks Black Headers, Borla S-tunes, Eibach Multi-Pro-R2 coilovers and Swaybars, BMR Full Bushing kit with Toe and Trailing arms, RB Rotors w/EBC Pads, GForce 1400 Axles (now on order). AVH-X5800BHS in Scosche GM5201AB. |
|
|
|
|