HID Fogs (Non RS) installed

[a7888ku]

Finally got my HID fog lights installed. 6K matched up with 6K HID headlights.

[A_DILLA]

Looks good bro

[Jenner]

Loos good.you already had fog lights right?

[a7888ku]

Originally Posted by Jenner

Loos good.you already had fog lights right?

Thanks. Yeah, just upgraded from the halogens to the HIDs. It was pretty easy to do but just had to cut the connector's wires and splice in to the HID pos and neg wires.

[Hawk3907]

I hope they don't melt.
The stock fog setup was not designed for HID.

[a7888ku]

Originally Posted by Hawk3907

I hope they don't melt.
The stock fog setup was not designed for HID.

I hope so too. I was told by a few vendors that 35w or lower would not cause melting. These are 25w. We'll see...

[Hawk3907]

I think if I remember correctly the 55w are the only ones I have read about having melting issues.
You should be good with the 25w.
I swapped to HID's a while back. 35w. But I swapped out the entire fog and replaced with with an HID housing just to be safe.

[a7888ku]

Originally Posted by Hawk3907

I think if I remember correctly the 55w are the only ones I have read about having melting issues.
You should be good with the 25w.
I swapped to HID's a while back. 35w. But I swapped out the entire fog and replaced with with an HID housing just to be safe.

Are the new HID housings projectors too?

[Hawk3907]

Yes.
This is the style I got:
http://store.ijdmtoy.com/Projector-H...ctor_sku76.htm

Cheaper on Ebay though.

[a7888ku]

Originally Posted by Hawk3907

I hope they don't melt.
The stock fog setup was not designed for HID.

Just an update...to date no sign of melting or discoloration in the lenses or assemblies. Use the all the time. 25w is GTG.