Stock Exhaust

[BigBOSS]

Does anyone that has done a full Catback replacement exhaust have pictures of the stock exhaust laid out?

[RS_Man]

I can get some pictures for you this evening, I have to lay the factory exhaust on the floor then I'll get some pictures. Anything in particular you want to see?

[BigBOSS]

Originally Posted by RS_Man

I can get some pictures for you this evening, I have to lay the factory exhaust on the floor then I'll get some pictures. Anything in particular you want to see?

I pretty much just want to see how hard it would be to cut out the resonators if I were to install an axleback system.

[RS_Man]

Very easy. Have you had your car up on a lift yet? there's plenty of room to work, just cut them out and replace with a pipe. I will get pictures for you as soon as I can move things around in my garage

[BigBOSS]

Originally Posted by RS_Man

Very easy. Have you had your car up on a lift yet? there's plenty of room to work, just cut them out and replace with a pipe. I will get pictures for you as soon as I can move things around in my garage

Nah, I don't have my car yet. Just making a list of stuff I'd like to do ahead of time, based on practicality.

[TAG UR IT]

http://www.camaro5.com/forums/showthread.php?t=27924

[JTinFL]

It would be very easy to take the cats and resonators out if you wanted.

[scrming]

personally... I would be very careful messing with anything up stream of the mufflers... V6's get very raspy, very easily... Only mod i ever regretted on my Mustang (and I did a LOT!) was removing the stock cats... The car just never sounded right after that, even with high flow cats..... and the gains were fairly minimal... I learned my lesson... so for me I'm not touching the stock resonators or cats...