Holley Dominator EFI and Digital Dash, plus Mil-spec Harness!

[Jordan I]

One of our sponsored racers gave me his spare Holley stuff to pay down his invoice and I figured I'd make someone on here a sweet deal.

Brand new, still in the box, Holley Dominator EFI with the current (updated) firmware. Was plugged in to verify that the first ECU wasn't the issue while troubleshooting a COPO Camaro and put right back in the box. These are ~$1750 online, retail for a bajillion dollars more, etc.






2x (one brand new, one mounted but never raced) Holley 5.7" Touch Screen Digital Dashes - these go for $700+ online and retail way above that
[/size]

These allow real-time tuning, enabling/disabling switched outputs (to control relays/etc), and let you data log to an SD card right there in the dash - no running to get the laptop connected to look at a log, pull it up right there on the dash or pop the card out to take inside (with a beer) to your computer.



Lots of display options, from digital dash (Motec/Aimsports/Racepak look)...


... to the more traditional needles and channels displays



You can install one or do both like this bossy dude and see/control EVERYTHING


Lastly - the Mil-spec harness - this is the best part! I haven't made it yet, because its done custom for you. I've done Holley setups on everything from Formula Drift LS7's to street car/pro-touring setups to this ~2200hp NMCA radial Camaro. LSx standalone harnesses typically start around $1200.



Would be tucked/loomed/etc like my setup...


... or done in Raychem DR25-equiv heat shrink loom




I'd prefer to sell everything as a complete, custom setup.
Dominator, both screens, and a custom Mil-spec harness for $3300
Otherwise, the Dominator is $1500obo, each screen is $500obo, and we can always talk about a harness.

Feel free to PM me here, shoot me an email to jeff [at] jordan innovations.com, or contact me through our website (jordaninnovations.com).

[Jordan I]

Sold, thanks guys!