Help! Where to find this part? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Zfatuated · 06-16-2014, 07:00 PM

Part number/source please? Plugs into the sub-frame, underbody aero panel/fenderwell liners attach. M6

backtotintops · 06-16-2014, 07:51 PM

I assume you have tried gm. Is it threaded on the inside? Maybe try "nut-certs" at McMaster-Carr and Aircraft Spruce or send the pict to their tech departments.

Zfatuated · 06-16-2014, 08:14 PM

Quote:

Originally Posted by backtotintops

I assume you have tried gm. Is it threaded on the inside? Maybe try "nut-certs" at McMaster-Carr and Aircraft Spruce or send the pict to their tech departments.

Yes threaded on the inside, M6.

We dug hard into the exploded views and could not identify it (them actually, there are maybe ten of them?). No luck at any auto-body supply and nothing on Mcmaster Carr, but that was a great suggestion.

Trust me when I tell you, some of you guys are going to need these. Help me, help yourself

2SSRS@Gen5diy · 06-16-2014, 08:20 PM

Can you post what you do have? (exploded views)

backtotintops · 06-16-2014, 08:29 PM

I bet "radrace19" has the answer..nothing has stumped him so far.

Zfatuated · 06-16-2014, 08:29 PM

Quote:

Originally Posted by 2SSRS@Gen5diy

Can you post what you do have? (exploded views)

I don't have any exploded views that show the location. Here is where they are in the sub-frame. The frame has square cut-outs and the push-nuts push up into into those holes. See white circled areas for mystery nut locations. I would guess they are listed in the parts catalog somewhere but I can't find them.

Zfatuated · 06-16-2014, 08:32 PM

Quote:

Originally Posted by backtotintops

I bet "radrace19" has the answer..nothing has stumped him so far.

I've got a message in to him. Side note- my wicker arrived to him today. It's metal!

2SSRS@Gen5diy · 06-16-2014, 08:34 PM

And last what is the tread on them?

Zfatuated · 06-16-2014, 08:37 PM

Quote:

Originally Posted by 2SSRS@Gen5diy

And last what is the tread on them?

M6

90503 · 06-16-2014, 08:56 PM

....I'd take your sample part to a good Napa store, or even a good body shop....see if they recognize it or can match it....

Zfatuated · 06-16-2014, 09:16 PM

Quote:

Originally Posted by 90503

....I'd take your sample part to a good Napa store, or even a good body shop....see if they recognize it or can match it....

Two biggest body shop supply houses in Reno - never saw anything like it.

Mgizzle · 06-16-2014, 09:21 PM

My 1le has that between bumper and fender right around the side marker. Same as all camaros, service should have thwm.

90503 · 06-16-2014, 09:21 PM

Try here....might find it, or something good enough....

https://www.google.com/?gws_rd=ssl#q...ind+fastenings

or here

https://www.google.com/search?q=auto...w=1280&bih=899

Zfatuated · 06-16-2014, 09:28 PM

Quote:

Originally Posted by Mgizzle

My 1le has that between bumper and fender right around the side marker. Same as all camaros, service should have thwm.

Somebody, somewhere has that magical, elusive part number

06-16-2014, 07:00 PM	#1
Zfatuated Drives: BAC Mono Join Date: Apr 2013 Location: Reno Posts: 869	Help! Where to find this part? Part number/source please? Plugs into the sub-frame, underbody aero panel/fenderwell liners attach. M6 Attached Images __________________ 2014 Z/28, White "I wasn't asked to make it cheap...I was asked to make it FAST!" Mark Stielow, the new Z/28. Last edited by Zfatuated; 06-16-2014 at 07:47 PM.

06-16-2014, 07:51 PM	#2
backtotintops Drives: 14 Z/28 0# Join Date: May 2013 Location: NY Posts: 773	I assume you have tried gm. Is it threaded on the inside? Maybe try "nut-certs" at McMaster-Carr and Aircraft Spruce or send the pict to their tech departments. __________________ "PTM11" Search & Destroy

06-16-2014, 08:29 PM	#5
backtotintops Drives: 14 Z/28 0# Join Date: May 2013 Location: NY Posts: 773	I bet "radrace19" has the answer..nothing has stumped him so far. __________________ "PTM11" Search & Destroy

06-16-2014, 09:21 PM	#12
Mgizzle Drives: 2013 Camaro 1LE 1SS Join Date: Aug 2012 Location: Detroit Posts: 1,252	My 1le has that between bumper and fender right around the side marker. Same as all camaros, service should have thwm. __________________ I work for General Motors and am not an official spokes person for General Motors. My views and opinions are my own and not those of General Motors.

06-16-2014, 08:20 PM	#4
2SSRS@Gen5diy Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008 Location: By the lake in AZ Posts: 15,728 View My Garage	Can you post what you do have? (exploded views)

06-16-2014, 08:34 PM	#8
2SSRS@Gen5diy Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008 Location: By the lake in AZ Posts: 15,728 View My Garage	And last what is the tread on them?

06-16-2014, 08:56 PM	#10
90503 Drives: 2011 2SS/RS LS3 Join Date: Nov 2011 Location: Torrance Posts: 14,564	....I'd take your sample part to a good Napa store, or even a good body shop....see if they recognize it or can match it....