Will the OEM Car Cover fit a Camaro with GFX installed? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Li0nel1234 · 08-08-2009, 07:53 PM

Does anyone know?

Anyone with GFX use the car cover yet?

jackka · 08-08-2009, 11:11 PM

I don't see why it wouldn't fit since its only a small addition of volume on the underside and the cover isn't meant to cover the underside fully anyway.

But, I haven't tried it myself, so who knows?

bob2the2nd · 08-09-2009, 01:50 AM

im not sure what OEM stands for but if its the one from GM you are talking about, yes it will. one of the guys that lives close to me who has GFX has the cover and it fits.. though just barely

2032Ceta · 08-09-2009, 09:41 AM

Damn, I didn't even think of that. I should have the painted GFX on by Wednesday and I'll check. You would think it would...

Li0nel1234 · 08-09-2009, 09:56 AM

I am going to test mine today after I rinse and dry the car. It's dusty and I don't want to cover a dusty car.

Li0nel1234 · 08-09-2009, 11:38 PM

It fits...

SUPER SNUG

I'm a little affraid to see what might happen to the front lip from this thing being so tight. I might leave it off the front lip in the morning or later tonight if I can't sleep cuz of it haha. But it fits... I want the california car cover instead. It looks like it protects more and it fits looser.

chevyss · 08-10-2009, 12:45 AM

That's a good thing 2 know when I go to get ground affects. The only part of the ground affects I like is the rear piece. I know I have the factory red cover and it's tight. Seems to have loosen up some since new.

08-08-2009, 07:53 PM	#1
Li0nel1234 What should I name my car Drives: 2010 Camaro 2SS RS IOM Join Date: Jul 2009 Location: San Antonio, TX Posts: 786 View My Garage	Will the OEM Car Cover fit a Camaro with GFX installed? Does anyone know? Anyone with GFX use the car cover yet?

08-09-2009, 01:50 AM	#3
bob2the2nd Drives: CGM 2LT RS Join Date: Oct 2008 Location: newark, de Posts: 542	im not sure what OEM stands for but if its the one from GM you are talking about, yes it will. one of the guys that lives close to me who has GFX has the cover and it fits.. though just barely __________________ 2LT CGM auto/sunroof/RS 1100: 11-29-08 6000: 6-29-09 cracked windshield: 7-1-09 1000 miles 7-4-09 windshield replaced: 7-9-09 2000 miles 7-10-09 (yep 2000 miles in 11 days) 3000 miles 7-16-09 4000 miles 7-30-09

08-09-2009, 09:56 AM	#5
Li0nel1234 What should I name my car Drives: 2010 Camaro 2SS RS IOM Join Date: Jul 2009 Location: San Antonio, TX Posts: 786 View My Garage	I am going to test mine today after I rinse and dry the car. It's dusty and I don't want to cover a dusty car. __________________ Performance: ARH 2"/"3 headers + ARH 3" HF catback system, SS brake lines, hawk HP+ pads, motul RBF 600 fluid, K&N CAI (w/custom insulation), plug wires, air scoop, Hurst STS, Pedders Track II suspension, 18x10 wheels, 295/45/18 Nitto NT05s Looks: powder coated iom calipers, LED foglights w/ always on harness, custom painted bowties, window tint, smoke tinted tail lights etc, oem gfx w/ custom outlets, painted taillight bezels, all weather trunk mat

08-09-2009, 11:38 PM	#6
Li0nel1234 What should I name my car Drives: 2010 Camaro 2SS RS IOM Join Date: Jul 2009 Location: San Antonio, TX Posts: 786 View My Garage	It fits... SUPER SNUG I'm a little affraid to see what might happen to the front lip from this thing being so tight. I might leave it off the front lip in the morning or later tonight if I can't sleep cuz of it haha. But it fits... I want the california car cover instead. It looks like it protects more and it fits looser. __________________ Performance: ARH 2"/"3 headers + ARH 3" HF catback system, SS brake lines, hawk HP+ pads, motul RBF 600 fluid, K&N CAI (w/custom insulation), plug wires, air scoop, Hurst STS, Pedders Track II suspension, 18x10 wheels, 295/45/18 Nitto NT05s Looks: powder coated iom calipers, LED foglights w/ always on harness, custom painted bowties, window tint, smoke tinted tail lights etc, oem gfx w/ custom outlets, painted taillight bezels, all weather trunk mat

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New Camaro Exterior and Interior Stainless Steel Trim Parts from RPI Designs!	RPI Designs	Cosmetics and Lighting Modification Discussions	36	04-02-2020 06:32 PM
Winner, winner - Jalopnik compares the Big 3	Number 3	5th Gen Camaro SS LS LT General Discussions	31	04-17-2011 04:24 PM
The first week with un-pink camaro! (a review with pics)	pinkcamaro10	5th Gen Camaro SS LS LT General Discussions	31	07-02-2009 08:54 PM
Pedderizing the Nickey Camaro! Pedders coilovers / suspension fitted & tested.	DallasMike	Wheels and Tires Talk Sponsored by The Tire Rack	57	06-15-2009 05:36 PM
Some thoughts on "recent" developments on this site....	fbodfather	5th Gen Camaro SS LS LT General Discussions	258	05-08-2009 11:24 PM

08-08-2009, 11:11 PM	#2
jackka Drives: 2011 Black/Black 2LT/RS M6 w/Sroof Join Date: Jul 2009 Location: FT. Rucker, Alabama, the home of Army Aviation! Posts: 200	I don't see why it wouldn't fit since its only a small addition of volume on the underside and the cover isn't meant to cover the underside fully anyway. But, I haven't tried it myself, so who knows?

08-09-2009, 09:41 AM	#4
2032Ceta Drives: 2010 Camaro/2009 Nissan Rogue Join Date: May 2009 Location: Oklahoma Posts: 89	Damn, I didn't even think of that. I should have the painted GFX on by Wednesday and I'll check. You would think it would...

08-10-2009, 12:45 AM	#7
chevyss SS/RS Drives: 2010 SS/RS IOM w/blk stripes A6 Join Date: Jun 2009 Location: Eastern Washington Posts: 816 View My Garage	That's a good thing 2 know when I go to get ground affects. The only part of the ground affects I like is the rear piece. I know I have the factory red cover and it's tight. Seems to have loosen up some since new.