How to remove wire harness for headlight bulb ? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

191185 · 09-01-2014, 11:35 AM

Hello,

2010 camaro RS headlight bulb, I can get the bulb out, but I could not get the wire harness off .

This is the RS, so it has the factory HIDs

Are you supposed to pry up the tabs on all four sides ?

Do you remove the harness then the bulb, do you just pull really hard ?

I took the bulb out first, then tried the harness, couldn't get it off, and didn't want to break anything

mycamaro2011 · 09-01-2014, 12:35 PM

wiggle it side to side while pulling down

191185 · 09-01-2014, 01:52 PM

I just pulled and wiggled and it worked. I was worried about having to press a clip in or breaking off a clip or something

191185 · 09-01-2014, 01:54 PM

I have the bulb and ballast out, it's all one piece. Can I buy a new bulb and ballast together ?

Amazon only shows non hids

Manual says H13 which appears to be the regular non RS bulb

Anyone know what part number for the headlight bulb, with the ballast ?

191185 · 09-01-2014, 02:26 PM

Alright, I just ordered a bulb from Camaro5DIY.com , I should be good to go. Do they offer discounts to forum members ?

RingLeaderMan · 08-14-2015, 06:49 PM

I have a 2014 RS and I cannot seem to remove mine from the drivers side. I wiggled and pulled but it just will not come out. Do i have to press something in or do I just pull it from the wire? I don't want to break anything.

09-01-2014, 11:35 AM	#1
191185 Drives: 2010 2LT/RS 6A Join Date: Aug 2014 Location: Minnesota Posts: 203	How to remove wire harness for headlight bulb ? Hello, 2010 camaro RS headlight bulb, I can get the bulb out, but I could not get the wire harness off . This is the RS, so it has the factory HIDs Are you supposed to pry up the tabs on all four sides ? Do you remove the harness then the bulb, do you just pull really hard ? I took the bulb out first, then tried the harness, couldn't get it off, and didn't want to break anything

09-01-2014, 12:35 PM	#2
mycamaro2011 Drives: 2010 Camaro 2LT Victory Red Join Date: Feb 2011 Location: Boston MA Posts: 358	wiggle it side to side while pulling down

09-01-2014, 01:52 PM	#3
191185 Drives: 2010 2LT/RS 6A Join Date: Aug 2014 Location: Minnesota Posts: 203	I just pulled and wiggled and it worked. I was worried about having to press a clip in or breaking off a clip or something

09-01-2014, 01:54 PM	#4
191185 Drives: 2010 2LT/RS 6A Join Date: Aug 2014 Location: Minnesota Posts: 203	I have the bulb and ballast out, it's all one piece. Can I buy a new bulb and ballast together ? Amazon only shows non hids Manual says H13 which appears to be the regular non RS bulb Anyone know what part number for the headlight bulb, with the ballast ?

09-01-2014, 02:26 PM	#5
191185 Drives: 2010 2LT/RS 6A Join Date: Aug 2014 Location: Minnesota Posts: 203	Alright, I just ordered a bulb from Camaro5DIY.com , I should be good to go. Do they offer discounts to forum members ?

08-14-2015, 06:49 PM	#6
RingLeaderMan Drives: 2014 Camaro 1LT Rs Join Date: Aug 2015 Location: Texas Posts: 2	I have a 2014 RS and I cannot seem to remove mine from the drivers side. I wiggled and pulled but it just will not come out. Do i have to press something in or do I just pull it from the wire? I don't want to break anything.