Vortech V3 Kit - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

BLACKVORTECHSS · 09-26-2014, 08:30 AM

Hey all, some of you may have checked out my build thread, but I have a 441 ls7 stroker going in the car now and will be going NA. I have decided to put the V3 kit up for sale LOCALLY. Any of you Ontario Canada camaro freaks want in on a vortech v3 PM me. Kit had some customization done so I would like to go through it with the buyer IN PERSON. Comes with everything except injectors, overflow bottle and wiper relocation bottle. It also includes an additional Tial Q BOV and 3.33". almost all silicon couplers replaced with vibrant black and tbolt clamps. $3250 all in. This setup on my car made 720rwhp with 10psi stock bottom end with a mild blower cam.

BLACKVORTECHSS · 09-28-2014, 01:02 PM

Had a few questions:

Kit came with 65lb/hr injectors. i will be reusing them so they are NOT included.

I WILL include the ATI balancer with blower pulley and all hardware.

I WILL include the wiper bottle conversion.

The blower has about 6,500 miles on it, and received regular fluid changes as per vortech instructions. I did not store it with the shipping plug installed so it will need to be cleaned as some lube poured out.

I made 650rwhp with 3.33 pulley and meth only @12 psi.

10silverice · 10-01-2014, 12:21 AM

Any pics....???

BLACKVORTECHSS · 10-01-2014, 08:47 AM

Here is a pic installed. Most of the couplers have been replaced with black vibrant silicone and T-bolt clamps. I'll try to put some pics together of the entire kit.

BLACKVORTECHSS · 10-07-2014, 12:35 PM

bumpzilla

scorpion757 · 10-07-2014, 12:56 PM

Would you be interested in separating from the meth and the boost a pump? Do you have any pictures of those

BLACKVORTECHSS · 10-14-2014, 01:24 PM

you're looking for just the meth kit and BAP?

tkjohn25 · 10-14-2014, 01:26 PM

Whats shipping to usa going to cost?

SilversharkSS · 02-25-2015, 09:49 PM

Do you still have this kit for sale. Looking to buy!

hatchethead · 03-02-2015, 11:06 AM

PMD

Eber · 03-02-2015, 02:19 PM

I want this kit. Im in vancouver bc. Pm me and ill give u my #

Eber · 03-06-2015, 11:48 AM

Still for sale? I want!

LTRS777 · 03-06-2015, 12:58 PM

Interested. Pm if available

Eber · 03-22-2015, 12:45 PM

Once again contact me if u can ship it. I know u want local... But i want it

09-26-2014, 08:30 AM	#1
BLACKVORTECHSS Matthew Pigott Drives: 2010 Camaro 2SS Join Date: Sep 2013 Location: Toronto, Ontario Posts: 109	Vortech V3 Kit Hey all, some of you may have checked out my build thread, but I have a 441 ls7 stroker going in the car now and will be going NA. I have decided to put the V3 kit up for sale LOCALLY. Any of you Ontario Canada camaro freaks want in on a vortech v3 PM me. Kit had some customization done so I would like to go through it with the buyer IN PERSON. Comes with everything except injectors, overflow bottle and wiper relocation bottle. It also includes an additional Tial Q BOV and 3.33". almost all silicon couplers replaced with vibrant black and tbolt clamps. $3250 all in. This setup on my car made 720rwhp with 10psi stock bottom end with a mild blower cam. Last edited by BLACKVORTECHSS; 03-13-2015 at 02:21 PM.

10-01-2014, 12:21 AM	#3
10silverice Drives: 2010 2SS/RS LS3 Join Date: Aug 2012 Location: North Carolina Posts: 217 View My Garage	Any pics....??? __________________ 2010 LS3 SW long tubes w/hi flow cats, X-pipe into a Pypes exhaust, custom ground Comp cam with hardened pushrods and .660 lift springs, BBK 102mm throttle body, K&N CAI,JET MAF, Mayhem Motorsports tune, Forged 360 rim w/ Nitto 315 rears and 275 front, H&R 2"lowering springs.

10-01-2014, 08:47 AM	#4
BLACKVORTECHSS Matthew Pigott Drives: 2010 Camaro 2SS Join Date: Sep 2013 Location: Toronto, Ontario Posts: 109	Here is a pic installed. Most of the couplers have been replaced with black vibrant silicone and T-bolt clamps. I'll try to put some pics together of the entire kit. Attached Images

03-02-2015, 11:06 AM	#10
hatchethead Smells Like Burnt Rubber Drives: 2010 Black 2SS/RS Join Date: Oct 2012 Location: SWFL Posts: 325 View My Garage	PMD __________________ 2010 2SS/RS Black on Black Koni struts and shocks Hotchkis 1.25 inch drop springs Heritage Grill Forgeline GA3R Rims wrapped in Nitto Invos Mbrp 3 inch exhaust w/ 1 7/8 ARH headers No cats Rotofab and RX catch can SCT X4 Tuned by RDP

03-06-2015, 12:58 PM	#13
LTRS777 Drives: 2014 Saleen 620 White Label #14-011 Join Date: Dec 2014 Location: AL Posts: 610	Interested. Pm if available __________________ '14 Saleen 620 White Label #14-011 ADM LSA Stage 1 Kit, ADM 2.75 Pulley, DEKA 63lb injectors, ZL1 Fuel Pump, JLT 123MM Big Mouth intake, TSP 2" LTHs, BW TB, 2.5" Catback, Scott Culbert/GEN3PERF tuned! 573WHP/557WTQ @ 10psi. Build Thread Here: http://www.camaro5.com/forums/showthread.php?t=390708

09-28-2014, 01:02 PM	#2
BLACKVORTECHSS Matthew Pigott Drives: 2010 Camaro 2SS Join Date: Sep 2013 Location: Toronto, Ontario Posts: 109	Had a few questions: Kit came with 65lb/hr injectors. i will be reusing them so they are NOT included. I WILL include the ATI balancer with blower pulley and all hardware. I WILL include the wiper bottle conversion. The blower has about 6,500 miles on it, and received regular fluid changes as per vortech instructions. I did not store it with the shipping plug installed so it will need to be cleaned as some lube poured out. I made 650rwhp with 3.33 pulley and meth only @12 psi.

10-07-2014, 12:35 PM	#5
BLACKVORTECHSS Matthew Pigott Drives: 2010 Camaro 2SS Join Date: Sep 2013 Location: Toronto, Ontario Posts: 109	bumpzilla

10-07-2014, 12:56 PM	#6
scorpion757 Drives: fast n loud Join Date: Feb 2014 Location: virginia beach Posts: 126	Would you be interested in separating from the meth and the boost a pump? Do you have any pictures of those

10-14-2014, 01:24 PM	#7
BLACKVORTECHSS Matthew Pigott Drives: 2010 Camaro 2SS Join Date: Sep 2013 Location: Toronto, Ontario Posts: 109	you're looking for just the meth kit and BAP?

10-14-2014, 01:26 PM	#8
tkjohn25 Drives: 2013 Camaro SS Join Date: Feb 2011 Location: North Huntingdon, Pa Posts: 204	Whats shipping to usa going to cost?

02-25-2015, 09:49 PM	#9
SilversharkSS Drives: 2012 silver 2SS, cam, exhaust. Join Date: Aug 2014 Location: Arkansas Posts: 174	Do you still have this kit for sale. Looking to buy!

03-02-2015, 02:19 PM	#11
Eber Drives: 2010 camaro ss Join Date: Mar 2015 Location: North vancouver Posts: 33	I want this kit. Im in vancouver bc. Pm me and ill give u my #

03-06-2015, 11:48 AM	#12
Eber Drives: 2010 camaro ss Join Date: Mar 2015 Location: North vancouver Posts: 33	Still for sale? I want!

03-22-2015, 12:45 PM	#14
Eber Drives: 2010 camaro ss Join Date: Mar 2015 Location: North vancouver Posts: 33	Once again contact me if u can ship it. I know u want local... But i want it