First day at track....Need Z28 setup sheet - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

MARKSTI · 01-16-2015, 04:36 PM

Hey Guys

I'm going to the track tomorrow.
Can somebody post the GM performance setup sheet for our car?
Its the one that gives alignment angles and brake bedding instructions..

Thanks,
Mark

KaBoom1701 · 01-16-2015, 04:54 PM

Didn't you get that stuff when you bought the car?

http://www.chevrolet.com/content/dam...PREP_Final.pdf

X25 · 01-16-2015, 05:05 PM

Well, some of the track-prep involves fluid and alignment changes (if you're inclined to follow), for which you're probably too late.

I personally think besides the guidance on alignment settings, there's not much to follow.

MARKSTI · 01-16-2015, 05:12 PM

Quote:

Originally Posted by KaBoom1701

Didn't you get that stuff when you bought the car?

http://www.chevrolet.com/content/dam...PREP_Final.pdf

NOPE...Think the wash boy toke it...hehe
He left me the yellow spring spacer tho.

Just installed the camber plates this afternoon,...doing the alignment right now

MARKSTI · 01-16-2015, 06:17 PM

Just did the alignment
The plates rock...max setting for the front gets 3.7 degrees camber..WOW
Dailed it back alittle tho....since my rear adjustable arms aren't installed yet
Ended up with 1.4 degrees rear camber/2.3 degrees front with 180# driver

01-16-2015, 04:36 PM	#1
MARKSTI Drives: 2015 z28 sold Join Date: Dec 2014 Location: As Posts: 80	First day at track....Need Z28 setup sheet Hey Guys I'm going to the track tomorrow. Can somebody post the GM performance setup sheet for our car? Its the one that gives alignment angles and brake bedding instructions.. Thanks, Mark

01-16-2015, 04:54 PM	#2
KaBoom1701 KaBoom1701 Drives: 13' ZL1 Red M6 Join Date: Dec 2012 Location: I.E. SoCal (Yucaipa) Posts: 8,631	Didn't you get that stuff when you bought the car? http://www.chevrolet.com/content/dam...PREP_Final.pdf __________________ Mods: Roto-Fab Intake, WW Res. kit & Big Gulp Air Scoop, Elite Catch Can, ATI Super Damper & 18% OD Pulley, LF Idler pulley bracket, Metco CC breather, ID850 Injectors, Stainless Power Headers w/ ceramic coating, TR71X Spark Plugs, JMS Fuel Pump Booster, Bo White TB, Tuned by Ted @ Jannetty Racing, Ron Davis HX, D3 Reservoir, Pfadt 1" Springs, Moreno Camber Plates, ZL1 Addons Splitter guard washers, Tow Hook kit & rock guards, Hurst Shifter Billet Plus 6 Speed Short Shifter, ZL1 DRL lighting harness, ZL1 Recaro Seats.

01-16-2015, 05:05 PM	#3
X25 Drives: '16 C7 Z51 Join Date: May 2012 Location: Redmond, WA Posts: 3,056	Well, some of the track-prep involves fluid and alignment changes (if you're inclined to follow), for which you're probably too late. I personally think besides the guidance on alignment settings, there's not much to follow. __________________ '16 Corvette C7 Z51 1LT (Build Thread) '14 AGM 1SS 1LE [COTW 11/17/14] (Build Thread) (SOLD) '13 Mazda MX-5 Club (Build Thread) '17 RAM 1500 Crew Cab 4x4 Night Edition '15 Nissan Rogue S AWD

01-16-2015, 06:17 PM	#5
MARKSTI Drives: 2015 z28 sold Join Date: Dec 2014 Location: As Posts: 80	Just did the alignment The plates rock...max setting for the front gets 3.7 degrees camber..WOW Dailed it back alittle tho....since my rear adjustable arms aren't installed yet Ended up with 1.4 degrees rear camber/2.3 degrees front with 180# driver