02-06-2015, 11:27 PM | #1 |
Drives: 2012 Camaro 2SS/RS Join Date: Jan 2012
Location: San Diego, CA
Posts: 116
|
Fontana drag racing
Fontana 1st drag racing event this year is on feb. 15th. I plan on heading up there. Anyone else going?
__________________
2012 2SS/RS Built LS3 AGP TT BW 257 turbos, custom cam, Lingenfelter Twin Fuel Pump, ID 850 injectors - Tuned by Ryne @ CMS 642 RWHP 636 RWTQ on 12PSI
|
02-07-2015, 12:05 AM | #2 |
"Cam Only"
|
I remember going last year and I met you briefly. Was a good time but only getting 3 passes after driving over 2 hours there (and 2 hours back) I think I'll be waiting till a day/event without so many cars. Plus I haven't ordered my drag radials yet..
EDIT: But you should come with a few of us (including Ryne and Texas) to The Red List event on the 28th up at Famoso. Going to be a blast.
__________________
2013 AGM Camaro 2SS/RS M6 | LSA Blower, 2.5" pulley, 10% lower, FIC1000's, Fore Innovations Twin Pump fuel system w/ Flex Fuel, CMS Custom Grind Cam, Kooks 1 7/8" headers w/ catless off-road pipes, NPP Exhaust, 3.91's, JLT ZL1 Intake, Prospeed Heat Exchanger | Pfadt Suspension, 1LE Sway Bars | DSS 1000hp axles | Mickey Thompson ET Street R 305/45/18 |
Tuned by Ryne @ CMS E85: 734rwhp/636rwtq (mustang dyno) |
02-07-2015, 01:00 AM | #3 |
Drives: 2012 Camaro 2SS/RS Join Date: Jan 2012
Location: San Diego, CA
Posts: 116
|
I remember meeting you. Yea I can understand that. last time there was a holiday weekend there was probably 100 cars and we got about 20 passes in. Honestly DR there are dangerous with out subframe support since its really sticky... I have seen multiple cars break axles. I got bigger turbos and think I will be kicked off or have to run lower boost. I think it has died down since last year since it was the grand opening.
I am planning to go to the red list event but need to get a truck so I can tow my car up.
__________________
2012 2SS/RS Built LS3 AGP TT BW 257 turbos, custom cam, Lingenfelter Twin Fuel Pump, ID 850 injectors - Tuned by Ryne @ CMS 642 RWHP 636 RWTQ on 12PSI
Last edited by MikeySmash; 02-07-2015 at 01:23 AM. |
02-07-2015, 01:36 AM | #4 |
"Cam Only"
|
Yeah, on a day with fewer cars, it would be a lot of fun.
The red list event looks to be just that. And I know, I'm going to take it easy, no hard launches. I'm just going to have fun, not trying to win anything obviously haha I'll be on the look out, and I look forward to seeing you there.
__________________
2013 AGM Camaro 2SS/RS M6 | LSA Blower, 2.5" pulley, 10% lower, FIC1000's, Fore Innovations Twin Pump fuel system w/ Flex Fuel, CMS Custom Grind Cam, Kooks 1 7/8" headers w/ catless off-road pipes, NPP Exhaust, 3.91's, JLT ZL1 Intake, Prospeed Heat Exchanger | Pfadt Suspension, 1LE Sway Bars | DSS 1000hp axles | Mickey Thompson ET Street R 305/45/18 |
Tuned by Ryne @ CMS E85: 734rwhp/636rwtq (mustang dyno) |
|
|
|
|