ADM LSA CONVERSION AND CAM!! - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Robbs1le · 02-16-2015, 04:28 PM

dropped my car off Saturday at andy's shop! cant tell you how excited I am to have andy at adm doing the work on my car. I did a lot of reading befor I decided on a shop to do the work on my car. im in okc so it was a 3 hour drive and a flight home then a flight down to drive the car home next Saturday! I cant wait to drive it! andy sent me dyno numbers today of a pre upgrades pull. car currently has a ported throttle body and headers with no tune and made 390 to the wheels! cant wait to see the numbers in 4 days!! I have to say andy has been absolutely amazing to work with so far. he has answered all my questions and beyond.

Robbs1le · 02-16-2015, 04:46 PM

since I'm adding all this power what kind of suspension upgrades will I be needing to make?

Team STILLEN · 02-16-2015, 04:57 PM

Very nice!

I would recommend a set of Trailing Arms.

JT

LTRS777 · 02-16-2015, 05:40 PM

Nice!!! Cant wait to see how it goes!!

Robbs1le · 02-16-2015, 05:50 PM

some pics from andy!!

hammdo · 02-16-2015, 06:32 PM

Oh, you are going to SO LOVE the conversion. That car will scream!

-Don

LTRS777 · 02-16-2015, 06:40 PM

Is this a full lsa conversion or lsa sc kit they sell?

hammdo · 02-16-2015, 06:41 PM

I should have gotten the ADM pulley assembly for my blower when I had it off -- you should consider it if you want to change out pulleys later. I'll do it eventually, but do it now while the blower is off....

-Don

hammdo · 02-16-2015, 06:42 PM

If ADM is doing it, probably the kit with ADM supplied SC...

-Don

LTRS777 · 02-16-2015, 06:48 PM

Quote:

Originally Posted by hammdo

If ADM is doing it, probably the kit with ADM supplied SC...

-Don

Just curious as i see the whole engine and trans dropped out lol. Didnt know if putting the lsa blower in was that serious or not.

Scotty D · 02-16-2015, 06:52 PM

Because I think it's a lot easier to do the cam swap with the engine and tranny out.

LTRS777 · 02-16-2015, 06:54 PM

Quote:

Originally Posted by Scotty D

Because I think it's a lot easier to do the cam swap with the engine and tranny out.

Andddd lightbulb comes on... Thanks. Forgot he was doing a cam as well. Cant wait to see the results!

Scotty D · 02-16-2015, 06:54 PM

Lol me too bud

hammdo · 02-16-2015, 06:58 PM

Yep, its way easier with that all out to do the cam -- trust me ;o)

-Don

02-16-2015, 04:28 PM	#1
Robbs1le Drives: 2017 zl1. Headers intake pulley e Join Date: Oct 2014 Location: Okc Posts: 174 View My Garage	ADM LSA CONVERSION AND CAM!! dropped my car off Saturday at andy's shop! cant tell you how excited I am to have andy at adm doing the work on my car. I did a lot of reading befor I decided on a shop to do the work on my car. im in okc so it was a 3 hour drive and a flight home then a flight down to drive the car home next Saturday! I cant wait to drive it! andy sent me dyno numbers today of a pre upgrades pull. car currently has a ported throttle body and headers with no tune and made 390 to the wheels! cant wait to see the numbers in 4 days!! I have to say andy has been absolutely amazing to work with so far. he has answered all my questions and beyond. Attached Images Last edited by Robbs1le; 02-16-2015 at 04:43 PM.

02-16-2015, 05:40 PM	#4
LTRS777 Drives: 2014 Saleen 620 White Label #14-011 Join Date: Dec 2014 Location: AL Posts: 609	Nice!!! Cant wait to see how it goes!! __________________ '14 Saleen 620 White Label #14-011 ADM LSA Stage 1 Kit, ADM 2.75 Pulley, DEKA 63lb injectors, ZL1 Fuel Pump, JLT 123MM Big Mouth intake, TSP 2" LTHs, BW TB, 2.5" Catback, Scott Culbert/GEN3PERF tuned! 573WHP/557WTQ @ 10psi. Build Thread Here: http://www.camaro5.com/forums/showthread.php?t=390708

02-16-2015, 05:50 PM	#5
Robbs1le Drives: 2017 zl1. Headers intake pulley e Join Date: Oct 2014 Location: Okc Posts: 174 View My Garage	some pics from andy!! Attached Images

02-16-2015, 06:40 PM	#7
LTRS777 Drives: 2014 Saleen 620 White Label #14-011 Join Date: Dec 2014 Location: AL Posts: 609	Is this a full lsa conversion or lsa sc kit they sell? __________________ '14 Saleen 620 White Label #14-011 ADM LSA Stage 1 Kit, ADM 2.75 Pulley, DEKA 63lb injectors, ZL1 Fuel Pump, JLT 123MM Big Mouth intake, TSP 2" LTHs, BW TB, 2.5" Catback, Scott Culbert/GEN3PERF tuned! 573WHP/557WTQ @ 10psi. Build Thread Here: http://www.camaro5.com/forums/showthread.php?t=390708

02-16-2015, 04:46 PM	#2
Robbs1le Drives: 2017 zl1. Headers intake pulley e Join Date: Oct 2014 Location: Okc Posts: 174 View My Garage	since I'm adding all this power what kind of suspension upgrades will I be needing to make?

02-16-2015, 04:57 PM	#3
Team STILLEN Drives: Varies Join Date: Dec 2009 Location: Costa Mesa, CA Posts: 2,182	Very nice! I would recommend a set of Trailing Arms. JT

02-16-2015, 06:32 PM	#6
hammdo 'It's an experiment' Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014 Location: Dallas TX Posts: 8,709 View My Garage	Oh, you are going to SO LOVE the conversion. That car will scream! -Don

02-16-2015, 06:41 PM	#8
hammdo 'It's an experiment' Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014 Location: Dallas TX Posts: 8,709 View My Garage	I should have gotten the ADM pulley assembly for my blower when I had it off -- you should consider it if you want to change out pulleys later. I'll do it eventually, but do it now while the blower is off.... -Don

02-16-2015, 06:42 PM	#9
hammdo 'It's an experiment' Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014 Location: Dallas TX Posts: 8,709 View My Garage	If ADM is doing it, probably the kit with ADM supplied SC... -Don

02-16-2015, 06:52 PM	#11
Scotty D Drives: 2014 1le 1SS CRMT Join Date: Apr 2014 Location: Boston mass Posts: 1,208	Because I think it's a lot easier to do the cam swap with the engine and tranny out.

02-16-2015, 06:54 PM	#13
Scotty D Drives: 2014 1le 1SS CRMT Join Date: Apr 2014 Location: Boston mass Posts: 1,208	Lol me too bud

02-16-2015, 06:58 PM	#14
hammdo 'It's an experiment' Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014 Location: Dallas TX Posts: 8,709 View My Garage	Yep, its way easier with that all out to do the cam -- trust me ;o) -Don