just bought a maggie - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

kc ss/rs · 02-20-2015, 05:06 PM

i have always wanted a supercharged car so i took the plunge into forced induction today. purchased a maggie kit from rdp today. steve was great to work with! i also purchased the livernois twin fuel pump and id850 injectors. my car is a l99 converted to a ls3. my cam specs are 212/220 588 intake 579 exhaust. 116 lobe separation. other mods are in my sig. hoping to be around 525-550rwhp. will post more once install and tuning is started.

hammdo · 02-20-2015, 05:11 PM

Congrats! Welcome to the SC family ;o). Its going to be fun for you...

-Don

BullF-16 · 02-20-2015, 05:37 PM

Get ready for aching face muscles! aka permagrin.

Js2fst · 02-20-2015, 05:57 PM

Cool I will be at Ryan's in a month or so with a Procharger

BooSSted · 02-21-2015, 12:11 AM

Welcome to the club! You'll make more power than you're shooting for.. Which is never a bad thing! Depending what pulley you're going to run. That cam will bleed off some boost.

pdiddy · 02-21-2015, 08:34 AM

Kc is your car the black one that I have parked by and talked to several times ?

kc ss/rs · 02-21-2015, 12:56 PM

Quote:

Originally Posted by pdiddy

Kc is your car the black one that I have parked by and talked to several times ?

yes it is. if all goes well next couple of months should be up and going.

kc ss/rs · 02-21-2015, 01:05 PM

Quote:

Originally Posted by BooSSted

Welcome to the club! You'll make more power than you're shooting for.. Which is never a bad thing! Depending what pulley you're going to run. That cam will bleed off some boost.

going to be running the six psi pulley for now.

Js2fst · 02-21-2015, 03:39 PM

Pdiddy how is yours coming along?

Andy-AMSOIL · 02-21-2015, 08:44 PM

Bolt it on and let her rip...

pdiddy · 02-22-2015, 08:41 AM

Got my th400 and squash w/ flex fuel setup all in and started it yesterday for the first time all winter I have a couple small issues to sort out once I do I will post some updates

BaronConcepts · 02-23-2015, 05:10 PM

Congrats! Post some photos once you get it installed

2012LS3VERT · 02-24-2015, 08:25 AM

Quote:

Originally Posted by kc ss/rs

going to be running the six psi pulley for now.

If you mean the stock pulley that comes with it, with your cam you may be closer to 4.5 or 5 psi.

BooSSted · 02-24-2015, 08:30 AM

Quote:

Originally Posted by kc ss/rs

going to be running the six psi pulley for now.

With that cam you'll be around 5 #'s ... maybe lower, gotta read your current mods. You're paying some big bucks, tax those damn $1,000 dollar injectors; you'll be fine. I'd drop to atleast a 3.4-3.6" pulley.

02-20-2015, 05:06 PM	#1
kc ss/rs Drives: 2010 ss/rs Join Date: Jun 2013 Location: kansas city missouri Posts: 247	just bought a maggie i have always wanted a supercharged car so i took the plunge into forced induction today. purchased a maggie kit from rdp today. steve was great to work with! i also purchased the livernois twin fuel pump and id850 injectors. my car is a l99 converted to a ls3. my cam specs are 212/220 588 intake 579 exhaust. 116 lobe separation. other mods are in my sig. hoping to be around 525-550rwhp. will post more once install and tuning is started. __________________ rotofab cai ported throttle body sp headers with cats loud mouth axle back no mufflers tuned by steve williams 6l80etuning.com bmr split springs cam motion custom camshaft btr 660 spring kit maggie 2300 id850 injectors livernois fuel pump

02-20-2015, 05:11 PM	#2
hammdo 'It's an experiment' Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014 Location: Dallas TX Posts: 8,709 View My Garage	Congrats! Welcome to the SC family ;o). Its going to be fun for you... -Don __________________ 747 RWHP 794 RWTQ "Horsepower sells cars, torque wins races." - Enzo Ferrari See My Build: http://www.camaro5.com/forums/showthread.php?t=385577

02-20-2015, 05:37 PM	#3
BullF-16 USAF retired! Thank God! Drives: 2011 1SS, 1LT red,1LT/RS SGM 98Z28 Join Date: Jul 2011 Location: North Texas Posts: 2,799	Get ready for aching face muscles! aka permagrin. __________________ HKE LSX427(Mast blk lbl 305 6bolt LS7heads, PatG231/246 blower cam, RWHP/TQ: 1281/1133 SNL Performance Custom Twin PT6766 BB turbos 4 to 25psi selectable on the Boost Leash controller, Squash dual 400LPH/ID2000s, ALKY 4 gal meth, Autometer AFR/Bst/oilpres/oiltemp/fuelpress gauges, Pedders Justice road crs pkg: All HD bushes, supercar 12kg coil overs, supercar ZL1 sways, camber plates all setup by JusticePete! :Gforce 9" 35spline S-Trac, 1500hp Outlaw axles, 3.5"alum DS, Monster Triple disc; 4xForgeline 19x10.5 4xBridgestone 305/30R19 RE-11, CTS-v calipers/rotors/Cobalt friction XR1/3 pads

02-21-2015, 12:11 AM	#5
BooSSted Drives: 2017 Z06 / 2012 CTS Join Date: Jul 2013 Location: NY Posts: 731	Welcome to the club! You'll make more power than you're shooting for.. Which is never a bad thing! Depending what pulley you're going to run. That cam will bleed off some boost. __________________ SOLD - Maggie Powered 2011 2SS Procharged Powered 2017 Z06

02-21-2015, 08:34 AM	#6
pdiddy Drives: 2011 2SS Join Date: Jun 2013 Location: Kansas City Posts: 997	Kc is your car the black one that I have parked by and talked to several times ? __________________ 2011 2SS,fti th400, ECS 1500, Flex Fuel, Boost built 376, squash fuel system

02-20-2015, 05:57 PM	#4
Js2fst 2010 transformer Drives: 2010 ss camaro Join Date: Nov 2014 Location: Lee's summit mo Posts: 591	Cool I will be at Ryan's in a month or so with a Procharger

02-21-2015, 03:39 PM	#9
Js2fst 2010 transformer Drives: 2010 ss camaro Join Date: Nov 2014 Location: Lee's summit mo Posts: 591	Pdiddy how is yours coming along?

02-21-2015, 08:44 PM	#10
Andy-AMSOIL Drives: bicycle Join Date: Jun 2014 Location: Digging for oil Posts: 375	Bolt it on and let her rip...

02-22-2015, 08:41 AM	#11
pdiddy Drives: 2011 2SS Join Date: Jun 2013 Location: Kansas City Posts: 997	Got my th400 and squash w/ flex fuel setup all in and started it yesterday for the first time all winter I have a couple small issues to sort out once I do I will post some updates __________________ 2011 2SS,fti th400, ECS 1500, Flex Fuel, Boost built 376, squash fuel system

02-23-2015, 05:10 PM	#12
BaronConcepts Drives: Camaro Join Date: Jan 2015 Location: NYC Posts: 222	Congrats! Post some photos once you get it installed