03-13-2015, 10:38 PM | #1 |
Do your breaks squeal on your Camaro SS?
I just bought a 2011 Camaro 2SS, and my brakes are squealing everytime I slow down to stop. I understand they are high performance Brembo Brakes, so some noise may be normal due to the metallic pads but it is pretty embarassing when coming to a stop. Does everyone else have this issue with their car?
|
|
03-13-2015, 10:49 PM | #2 |
Jumanji
Drives: '14 Z/28 - AGM - No A/C Join Date: Mar 2014
Location: Alaska
Posts: 1,688
|
Have you inspected the brakes yet? I would not judge your cars symptoms by whether or not another cars brakes squeal. All cars brakes could squeal, heck my Z/28 was squealing this evening when I went out for pizza. I would have the brakes inspected for rotor wear, type of pads installed, anti/rattle squeak clips or shims for the pads, and that the calipers are installed with proper bolt torque. The sound your hearing is the vibration of the rotors, (similar to a wet finger around crystal wine glass).
|
03-13-2015, 10:50 PM | #3 |
Moderator
|
Mine due. A lot of cars do that as the brakes wear. I'm going to have mine inspected in the near future.
__________________
RDP Motorsport//GEN5DIY//Cultrag Performance//JPSS//Rodgets Chevrolet//
Operation Demon//Buy at Invoice//RACECARWEAR RESPECT ALL CARS. LOVE YOUR OWN. warn 145:159 ban |
03-14-2015, 12:02 AM | #4 |
"Catharine"
Drives: '11 2SS/RS LS-3 IOM/IO vert Join Date: Mar 2011
Location: Southern NH
Posts: 2,132
|
When they get hot, ever since new. But only a tiny bit, not enough to be embarrassing or fingernails on chalkboard.
__________________
|
03-14-2015, 12:03 AM | #5 |
BeckyD Rocks :-)
|
Check your brake pads to make sure they don't need replacing.
__________________
2015 CRT 1SS/1LE RS/Recaro's/NPP/Nav/Rear vision pkg./BA speaker upgrade. Stage 3 BMR cam, ARH 1 7/8 headers, CAI,
BMR 1.25 drop springs, JPSS Billet Bushings, Peddars Cradle Bushings...460 whp...so far....SOLD, but not forgotten! |
03-14-2015, 12:14 AM | #6 |
Brembos make some noise under light application.
|
|
03-14-2015, 12:19 AM | #7 |
Drives: '16 Garnet Red 1SS Join Date: Mar 2014
Location: College Station, TX
Posts: 3,450
|
First thing in the morning. But v6 here.
__________________
'16 Camaro 1SS
'18 Miata GT Gone: '01 Camaro, '14 Camaro, '90 Miata |
03-14-2015, 12:33 AM | #8 |
Drives: 2011 Synergy Green 2SS/RS Join Date: Dec 2014
Location: Quad Cities, IL
Posts: 77
|
A couple things here, you indicate that you just bought it. Do you know if the previous owner or dealership may have just put new brakes on? If so, what type pad material was used? Metallic brake pads are much more prone to squealing. If semi-metallic or ceramic, were the broken in with some hard braking stops to wear them in? Just some ideas here.
__________________
2011 Camaro 2SS/RS Synergy Green LS3/M6
Skip Shift Eliminator Vitesse Throttle Controller 2008 Toyota Tundra Double Cab SR5/TRD Independent Amsoil Dealer |
03-14-2015, 12:43 AM | #9 |
Drives: 2012 Camaro 2SS/RS IOM Join Date: Oct 2012
Location: Calgary, AB
Posts: 771
|
Mine do and always have. My rotors warped at less than 10k kms, had them machined, but the squealing didn't change. I asked this question as well before, I understand that they can glaze and hard breaking will help to remove the glazing. Not a very technical answer but is what I have been told. Car is due for service and time to check the brakes as I'm at 64k kms.
|
03-14-2015, 12:50 AM | #10 | |
Drives: 2SS/RS Join Date: Sep 2008
Location: Western North Carolina
Posts: 7,225
|
Quote:
|
|
03-14-2015, 05:02 AM | #11 |
|
Mine make a little "squeal" (if you want to call it that) sometimes, after the car has been sitting for a while - especially if the rotors were wet when I parked it, or it is very humid. If you look closely, you can see a light coating of rust that forms on the rotor.
I have about a 1/4 mile between my driveway and a stop sign at the end of the street. If I just apply the brakes a little firmly as I approach the stop, it rubs that rust off and no more squeal from then on - until the next time. If no moisture is on the rotors when I park it, there is no squeal when I drive it after sitting.
__________________
2013 1SS/RS Coupe L99, Stainless Power Works LT Headers, SCT X4 Custom Tune from RDP, CAI Inc. Air Intake w/ Apex Scoop, VMAX CNC Ported Throttle Body, Solo Axle-Back Exhaust w/ J-pipes, Apex Catch Can, Husky Splash Guards, Heritage Grille, 3D Carbon Rear Spoiler, Oracle Chrome Turn Signal Bulbs, GM Reverse Light Trim Billets, Gorilla Black Locking Lugs, Emblem Pros Retro SS Badges/Custom Retro SS Kickplates/Under-hood Bowtie, 35% window Tint, Nitto Motivo Tires (6-8-18)
|
03-14-2015, 06:08 AM | #12 |
Drives: 19' ZL1 A10, w/pdr Join Date: Sep 2014
Location: S.W. ohio
Posts: 1,594
|
A lot of road grime will sometimes gum up the pads and coat the rotors. I have always cleaned my rotors with rubbing alcohol on my Harley when this happens (Brembos also) and the squeal goes away. Not saying this will cure your issue.
__________________
BTR Stg II cam w/ 38% fuel lobe, ARH 2" headers into 3" w/cats, Kong X port, Weapon X triple ht exchangers, NW 103, Rotofab big gulp, DSX lowside, TCM tune, BMR Lockout, Mustang dyno 720 rwhp, 634 rwtq on 93 pump.
|
03-14-2015, 06:57 AM | #13 |
ultracrepidarianism
Drives: '14 1SS/RS/1LE/NPP '18 Accord Sport Join Date: Mar 2014
Location: where folks drive like shit
Posts: 1,297
|
no.
__________________
|
03-14-2015, 09:37 AM | #14 |
ROAD COURSE JUNKIE
|
Mine don't now. They did with the stock brembo's but since I have done the 6 piston CTS-V conversion, they are quiet as can be.
__________________
|
|
|
|
|