Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Technical Camaro Topics > Wheels and Tires Talk Sponsored by The Tire Rack


Reply
 
Thread Tools
Old 06-01-2015, 02:05 PM   #1
revived
Vrrrm.
 
revived's Avatar
 
Drives: 2011 2SS/RS LS3
Join Date: Jun 2013
Location: MA
Posts: 1,495
Offset suggestions - and tire size suggestions

okay guys what is the best tire to run for my wheels.

they are boze wheels 20x9 +32 and 20x10.5 +38

I edited this post as too avoid opening another....
__________________


Last edited by revived; 06-07-2015 at 03:46 PM.
revived is offline   Reply With Quote
Old 06-05-2015, 07:31 AM   #2
alday72
 
Drives: 2011 camaro ss
Join Date: May 2015
Location: odessa, tx
Posts: 1
I just recently purchased forgestar f14 9.5x20 11x20 im thinking about running a 245/45/20 in front and a 305/3520 in the back i was told that. I would have any problems but i dont know if thats going to look right ,has anyone on here ever done this setup?
alday72 is offline   Reply With Quote
Old 06-05-2015, 08:04 PM   #3
GVA 45TH 2SS
KNGTFALL
 
GVA 45TH 2SS's Avatar
 
Drives: 2012 2SS 45th edition
Join Date: Aug 2012
Location: (Near) Charlotte, NC
Posts: 1,533
Quote:
Originally Posted by revived View Post
Can I run 255/35/20(9") & 295/35/20 (10.5") without setting off the monitors and will this throw off the speedo?
255-35-20 is 27" tall
295-35-20 is 28.1" tall
yeah that will give stabilitrac issues.
check here http://www.camaro5.com/forums/showthread.php?t=62838

Quote:
Originally Posted by alday72 View Post
I just recently purchased forgestar f14 9.5x20 11x20 im thinking about running a 245/45/20 in front and a 305/3520 in the back i was told that. I would have any problems but i dont know if thats going to look right ,has anyone on here ever done this setup?
Your good for stabilitrac they are off by a little more than a 1/4 inch. which is ok.
I'm not sure on how its gonna look though.

Its easy to figure out sizes that are not listed use the formulas below.

width x aspect % = sidewall height
multiply this times 2 then divide by 25.4 this will give you the total sidewall height in inches.
now add your wheel size to get the toatal height.

A 255/35 R20 tire would be

255 x 35% = 89.25mm (or 255 x 0.35)
89.25mm x 2 =178.5mm now divided by 25.4 is 7.03 inches.
7.03" + 20" wheel is 27.03" total height.

Last edited by GVA 45TH 2SS; 06-05-2015 at 08:24 PM.
GVA 45TH 2SS is offline   Reply With Quote
Old 06-07-2015, 03:46 PM   #4
revived
Vrrrm.
 
revived's Avatar
 
Drives: 2011 2SS/RS LS3
Join Date: Jun 2013
Location: MA
Posts: 1,495
bump got the exact Offsets, and now I need to find the right tires.
__________________

revived is offline   Reply With Quote
Old 06-08-2015, 08:37 AM   #5
Norm Peterson
corner barstool sitter
 
Norm Peterson's Avatar
 
Drives: 08 Mustang GT, 19 WRX
Join Date: Jul 2012
Location: Eastern Time Zone
Posts: 6,990
Quote:
Originally Posted by alday72 View Post
I just recently purchased forgestar f14 9.5x20 11x20 im thinking about running a 245/45/20 in front and a 305/3520 in the back i was told that. I would have any problems but i dont know if thats going to look right ,has anyone on here ever done this setup?
245/45 really isn't quite enough tire for 9.5" wide rims - I think something more like 265/40 might be a better overall match for the 9.5" wheel width and your 305/35 rear tire size.


Norm
__________________
'08 GT coupe 5M (the occasional track toy)
'19 WRX 6M (the family sedan . . . seriously)
Norm Peterson is offline   Reply With Quote
Old 11-15-2017, 04:56 PM   #6
datagram940
 
Drives: Camaro 2SS RS
Join Date: Oct 2014
Location: :-)
Posts: 61
Arrow

Hi guys!!!!!

Can I put on the rear 20x11 ET37 with 315/35 20 tires?

ET37 is a problem?

Thanks.
__________________
datagram940 is offline   Reply With Quote
 
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:47 PM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.