06-06-2015, 09:39 AM | #1 |
Questions about exhaust cut-outs
I'm havng headers, high flow cats and an axle back exhaust installed. The mid section will remain unchanged. I assume theres room there to install cut-outs? Does anyone know for sure?
Also, any recommendations on a specific brand of cut-outs? And, I'm wondering where others installed the button to operate them? I'd probably like it somewhat hidden, but don't want it inside the console. I know someone who did that on a GTO and didn't like it later. Thanks! |
|
06-06-2015, 11:54 AM | #2 |
Drives: SSICKO Join Date: Jul 2010
Location: MA
Posts: 754
|
Quick time performance oval cut outs...switch installed under the dash
__________________
Slowhawk Performance Built & Tuned
|
06-06-2015, 12:57 PM | #3 |
Adam E. Lucchesi
|
DMH cutouts on my SS. The switch is on the seat. You probably wouldn't even notice it if I didn't point it out.
|
06-06-2015, 05:46 PM | #4 |
KNGTFALL
Drives: 2012 2SS 45th edition Join Date: Aug 2012
Location: (Near) Charlotte, NC
Posts: 1,533
|
+1 on the QTP oval cutouts.
they are welded in just after the Cats on mine, and switch is hidden under dash as well |
06-06-2015, 06:21 PM | #5 |
Homeless Life Chose Me
Drives: LS3 (sold 4/21) Join Date: Nov 2014
Location: Streets of Philly
Posts: 3,648
|
Are there any cutouts that are bolt on that go in after the headers or hi flows?
|
06-07-2015, 08:12 AM | #6 | |
Drives: 2016 camaro 1SS Join Date: Jun 2013
Location: Miami
Posts: 350
|
Quote:
Personally i prefer these over the QTP cutouts
__________________
.
2016 BLK Camaro 1SS/LT1 M6: NPP | black front/rear bowtie | Blacked out taillights 2011 IOM Camaro 1SS/RS LS3: Stainless works 1 7/8" LT headers w/ Offroad pipes | TSP Cam 235/239 on a 112 | Powerbound 25% UD Pulley Roto-Fab Cold Air Intake | SW Retro Chambered Catback Exhaust | VMax Ported TB | Hurst Short Throw Shifter Trunnion upgrade | LSA Oil Pump | BMR 1.25 Spings | R1 Concept d/s Rotors Tuned by Lashway Motorsports - 501 Hp 430 ft-lb |
|
06-07-2015, 08:28 AM | #7 | |
Quote:
|
||
06-07-2015, 08:31 AM | #8 |
Drives: 2016 camaro 1SS Join Date: Jun 2013
Location: Miami
Posts: 350
|
yup they are.
__________________
.
2016 BLK Camaro 1SS/LT1 M6: NPP | black front/rear bowtie | Blacked out taillights 2011 IOM Camaro 1SS/RS LS3: Stainless works 1 7/8" LT headers w/ Offroad pipes | TSP Cam 235/239 on a 112 | Powerbound 25% UD Pulley Roto-Fab Cold Air Intake | SW Retro Chambered Catback Exhaust | VMax Ported TB | Hurst Short Throw Shifter Trunnion upgrade | LSA Oil Pump | BMR 1.25 Spings | R1 Concept d/s Rotors Tuned by Lashway Motorsports - 501 Hp 430 ft-lb |
06-07-2015, 07:08 PM | #9 |
Thanks for the responses. I ordered the QTP ovals tonight. Can't wait....dropping the car off at East Coast Supercharging on the 22nd to get a cam, headers, exhaust, cutouts and dyno tune.
|
|
06-09-2015, 07:01 PM | #10 |
Has anyone tried the wireless remotes to open/close their QTP cutouts? I received the cutouts today with the standard hard wired switch.....and I'm not real impressed with that switch. Its a really hard "toggle"....almost feels like I'm gonna break it when using it. It's also big and would definitely need to be hidden.
|
|
06-10-2015, 06:28 AM | #11 |
Drives: 2014 summit white camaro ss w/rs Join Date: Mar 2015
Location: Houston United States
Posts: 10
|
I have the wireless cutouts and somehow they didn't want to open after 2 months being install, they come with 3 month warranty and I sent them back to get repair but I really loved them... hope they can fix the problom..
|
06-10-2015, 06:37 PM | #12 |
What did you have to send back? Just the remotes or the valve actuators?
|
|
06-11-2015, 03:22 AM | #13 |
Drives: 2014 summit white camaro ss w/rs Join Date: Mar 2015
Location: Houston United States
Posts: 10
|
Just the cutouts I left all the wiring beacuse i tried them with the original switch and wireless switch and notghing
|
06-11-2015, 09:35 AM | #14 |
Homeless Life Chose Me
Drives: LS3 (sold 4/21) Join Date: Nov 2014
Location: Streets of Philly
Posts: 3,648
|
Do cutouts rattle everything when their open on the inside? When I ran open headers (with high flow cats attached) everything on the inside rattled and vibrated.
|
|
|
|
|