what parts do i need to re-build brembo calipers? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Nighthawk89 · 06-15-2015, 02:43 AM

Brembo Front Caliper Dust Shield Rebuild Kit part # is: 89047722
Brembo Front Caliper Piston/Seal Rebuild Kit part # is: 92244294
Brembo Rear Caliper Dust Shield Rebuild Kit part # is: 89047739
Brembo Rear Caliper Piston/Seal Rebuild Kit part # is: 89047731

So far this is what ive come across. Is there any more that i will need and do these numbers match up correctly to what i will need to send with my calipers when i have them powdercoated?

OmniCamaro · 08-14-2016, 03:36 PM

Quote:

Originally Posted by Nighthawk89

Brembo Front Caliper Dust Shield Rebuild Kit part # is: 89047722
Brembo Front Caliper Piston/Seal Rebuild Kit part # is: 92244294
Brembo Rear Caliper Dust Shield Rebuild Kit part # is: 89047739
Brembo Rear Caliper Piston/Seal Rebuild Kit part # is: 89047731

So far this is what ive come across. Is there any more that i will need and do these numbers match up correctly to what i will need to send with my calipers when i have them powdercoated?

I don't understand why a rebuild kit is like a unicorn for us! Must have something to do with sponsors on here. I've searched for years looking for one. There has to be an OEM one somewhere.

Nighthawk89 · 08-14-2016, 08:33 PM

Quote:

Originally Posted by OmniCamaro

I don't understand why a rebuild kit is like a unicorn for us! Must have something to do with sponsors on here. I've searched for years looking for one. There has to be an OEM one somewhere.

I couldnt agree more when i did the caliper powdercoating i was lost.. I ended up purchasing from Rockauto. Mike the powdercoater was really informative with which to buy and where from (rockauto). If you try to call direct to a dealership parts, they are unsure and unable to give a direct answer.

OmniCamaro · 08-21-2016, 07:31 PM

Quote:

Originally Posted by Nighthawk89

Brembo Front Caliper Dust Shield Rebuild Kit part # is: 89047722
Brembo Front Caliper Piston/Seal Rebuild Kit part # is: 92244294--need 2
Brembo Rear Caliper Dust Shield Rebuild Kit part # is: 89047739
Brembo Rear Caliper Piston/Seal Rebuild Kit part # is: 89047731 need 2

So far this is what ive come across. Is there any more that i will need and do these numbers match up correctly to what i will need to send with my calipers when i have them powdercoated?

I'm going to add the necessary bolts to your list. It's a good idea to replace them.
Front-11570788--4each
Rear-11515781--4each

Still verifying the dust boots, will post back when I've confirmed they are correct.

JusticePete · 08-21-2016, 07:44 PM

Google '2010 camaro ss caliper rebuild kit' for a quick listing.

olblue75 · 08-21-2016, 10:53 PM

If you have the 6 piston read post 3 and 108 for 6 piston vented piston and seal kit.
http://www.camaro5.com/forums/showth...=418667&page=8

OmniCamaro · 08-31-2016, 02:20 PM

As of right now I'm going to reuse the boots. If that changes and I purchase some I'll post back here. Thanks for the thread OP

Sent from my iPad using Tapatalk

OmniCamaro · 01-27-2017, 06:44 PM

I ordered the Carlson parts (2ea. for front & back). Comes with the dust boots, seals and bleeder covers for one caliper. Consider that when ordering.

http://www.rockauto.com/?carcode=1504749&parttype=1720

OmniCamaro · 02-18-2017, 04:28 PM

I'm updating on the Rockauto parts, DO NOT GET THE FRONT's there! I think the picture speaks for itself. I had 4 orders of them and had 2 'decent' seals out of the 16! Refund in process.

Sent from my iPad using Tapatalk

OmniCamaro · 02-18-2017, 04:36 PM

I also now have this. Sure wish I'd had this a long time ago!

Parts breakdown of the front calipers. You're welcome!

Added the rear breakdown as well.

JOHNSONROD · 02-18-2017, 05:29 PM

yeah the carlsons are crap for sure. i tried the centric and they seemed way better.

hammdo · 02-18-2017, 06:10 PM

Quote:

Originally Posted by OmniCamaro

I also now have this. Sure wish I'd had this a long time ago!

Parts breakdown of the front calipers. You're welcome!

Can you get the image for a ZL1 fronts ;o)?

Thanks for this one!

-Don

OmniCamaro · 02-18-2017, 06:35 PM

Quote:

Originally Posted by hammdo

Can you get the image for a ZL1 fronts ;o)?

Thanks for this one!

-Don

What year? And if you pm, or post, me your last 8 digits of your vin I can definitely get it.

Sent from my iPad using Tapatalk

OmniCamaro · 02-21-2017, 03:33 PM

Verified OE 'bleeder screws' with caps--GM P/N-25900782

These are ACDelco parts, straight from Italy/Brembo. This part number will get you 1 caliper or 2ea. screws with caps.

06-15-2015, 02:43 AM	#1
Nighthawk89 Drives: 2011 Camaro 2Ss M6 Join Date: Dec 2011 Location: Southern California Posts: 4,013	what parts do i need to re-build brembo calipers? Brembo Front Caliper Dust Shield Rebuild Kit part # is: 89047722 Brembo Front Caliper Piston/Seal Rebuild Kit part # is: 92244294 Brembo Rear Caliper Dust Shield Rebuild Kit part # is: 89047739 Brembo Rear Caliper Piston/Seal Rebuild Kit part # is: 89047731 So far this is what ive come across. Is there any more that i will need and do these numbers match up correctly to what i will need to send with my calipers when i have them powdercoated?

08-21-2016, 10:53 PM	#6
olblue75 Drives: 2010 2SS/RS Join Date: Dec 2009 Location: Clarksville Tennesse. Posts: 6,155	If you have the 6 piston read post 3 and 108 for 6 piston vented piston and seal kit. http://www.camaro5.com/forums/showth...=418667&page=8 __________________ Orange Krush II 1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components.

08-31-2016, 02:20 PM	#7
OmniCamaro US Veteran Drives: 2011 Silver Ice Metallic 2SS/RS A6 Join Date: Jan 2011 Location: Bossier City, La Posts: 1,407	As of right now I'm going to reuse the boots. If that changes and I purchase some I'll post back here. Thanks for the thread OP Sent from my iPad using Tapatalk __________________ *Dear Lord, give me the strength to carry on despite my Camaro addiction!* JRE iTSX tune, full cat-less Dynatech exhaust, CAI intake, Stillen Slotted/Drilled Rotors, RB braided brake lines, BMR lowering springs, (reserved for definite future MODS)

01-27-2017, 06:44 PM	#8
OmniCamaro US Veteran Drives: 2011 Silver Ice Metallic 2SS/RS A6 Join Date: Jan 2011 Location: Bossier City, La Posts: 1,407	I ordered the Carlson parts (2ea. for front & back). Comes with the dust boots, seals and bleeder covers for one caliper. Consider that when ordering. http://www.rockauto.com/?carcode=1504749&parttype=1720 __________________ *Dear Lord, give me the strength to carry on despite my Camaro addiction!* JRE iTSX tune, full cat-less Dynatech exhaust, CAI intake, Stillen Slotted/Drilled Rotors, RB braided brake lines, BMR lowering springs, (reserved for definite future MODS)

02-18-2017, 04:28 PM	#9
OmniCamaro US Veteran Drives: 2011 Silver Ice Metallic 2SS/RS A6 Join Date: Jan 2011 Location: Bossier City, La Posts: 1,407	I'm updating on the Rockauto parts, DO NOT GET THE FRONT's there! I think the picture speaks for itself. I had 4 orders of them and had 2 'decent' seals out of the 16! Refund in process. Sent from my iPad using Tapatalk __________________ *Dear Lord, give me the strength to carry on despite my Camaro addiction!* JRE iTSX tune, full cat-less Dynatech exhaust, CAI intake, Stillen Slotted/Drilled Rotors, RB braided brake lines, BMR lowering springs, (reserved for definite future MODS)

08-21-2016, 07:44 PM	#5
JusticePete Drives: Camaro Justice Join Date: Jun 2007 Location: Virginia Posts: 20,171	Google '2010 camaro ss caliper rebuild kit' for a quick listing.

02-18-2017, 05:29 PM	#11
JOHNSONROD Drives: 62 Chevy & 2021 1SS/1LE manual Join Date: Aug 2010 Location: Kentucky Posts: 893	yeah the carlsons are crap for sure. i tried the centric and they seemed way better.

02-21-2017, 03:33 PM	#14
OmniCamaro US Veteran Drives: 2011 Silver Ice Metallic 2SS/RS A6 Join Date: Jan 2011 Location: Bossier City, La Posts: 1,407	Verified OE 'bleeder screws' with caps--GM P/N-25900782 These are ACDelco parts, straight from Italy/Brembo. This part number will get you 1 caliper or 2ea. screws with caps. __________________ *Dear Lord, give me the strength to carry on despite my Camaro addiction!* JRE iTSX tune, full cat-less Dynatech exhaust, CAI intake, Stillen Slotted/Drilled Rotors, RB braided brake lines, BMR lowering springs, (reserved for definite future MODS)