You are browsing camaro5 
 |
|
06-16-2015, 12:21 PM
|
#1 |
 Drives: 2010 Inferno Orange 2SS Camaro M6 Join Date: Jun 2012
Location: Parkesburg, PA
Posts: 178
|
2012LS3VERT's (Pegasus CNC) products
Hey guys, I've been chatting a bit with 2012LS3VERT online and with his partner David via phone. Great guys but I can't seem to find much about their products in the way of reviews here. They gave me pretty good pricing but also told me some production changes are coming soon which honestly makes me a bit nervous if something fails and needs to be replaced. Have any of you used 2012LS3VERT's trailing arms, toe arms (both with Delrin bushings), solid sub frame bushings, and/or their offset diff bushings? This is the package I'm looking to order but I'd love to hear some positive feedback before ordering! I know I can go to BMR and get the trailing/toe arms for much less money but are 2012LS3VERT's that much better? Below is a link to their site. Thanks!
http://pegasuscnc.com/5th-GEN-CAMARO/ |
|
|
|
06-16-2015, 01:42 PM
|
#2 |
          
Drives: 2011 Camaro 2Ss M6 Join Date: Dec 2011
Location: Southern California
Posts: 4,013
|
Great guy. Knows what he is doing and will provide you with a quality product no question about that. I am running his Solid subframe bushings and not a single complaint here. They conduct business in a very fine manner (Quick to reply, great information, fast shipping & superb packaging). Hopefully this helps.
|
|
|
|
|
06-16-2015, 03:09 PM
|
#3 | |
|
Drives: 2010 Inferno Orange 2SS Camaro M6 Join Date: Jun 2012
Location: Parkesburg, PA
Posts: 178
|
Quote:
|
|
|
|
|
|
06-16-2015, 10:40 PM
|
#4 |
Drives: 2010 Camaro SS/RS CGM Join Date: Dec 2011
Location: Oskaloosa, IA
Posts: 632
|
Running his subframe bushings and they are sweet. Not running anything else because i already ordered trailing arms before he came out with them
|
|
|
|
|
06-17-2015, 01:09 AM
|
#5 |
|
I have some of his trailing arms and they look top notch
 I haven't put them on yet though so I cant say much besides the quality looks amazing
|
|
|
|
|
06-17-2015, 10:09 AM
|
#6 |
Drives: 2011 2SS/RS M6 VR Join Date: Aug 2011
Location: Chicagoland
Posts: 1,536
|
The trailing arms he makes were essentially a Pfadt design. Believe he got the rights to manufacture after they went belly up. I have the Pfadt arms and can say they work well. I also purchased his camber plates and they are machined nicely and a better design that Pfadt's originals. I bought an early set from him and questioned a clearance issue caused by the bolt lengths. Eventually he agreed that it was a potential problem and changed his design on the top plate slightly. He sent me new top plates and bolts. He even offered to pay return shipping on the old plates since they could machine those to the new design. +1 in service.
__________________
 |
|
|
|
|
|
|
|
 |
|
|
