Coil Spring Covers/ Sound detonating material - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Nighthawk89 · 09-08-2015, 01:45 AM

There has been some noise coming from my rear end on the rear left side. I mainly hear it at low speeds and when i apply pressure/bounce the car almost on the top of the rear wheel i can produce the squeak/noise. Im thinking it may be the spring but before i take it to the shop im wanting to purchase a set of those spring coil covers that youve seen on some aftermarket lowering springs in hopes of it being the fix.

Jeff_SS · 09-09-2015, 12:09 PM

Bump.
He's looking for like what comes on the pfadt springs. To see if the sound is a quick fix, or if it's something else..

Ventmaster · 09-09-2015, 02:21 PM

This may do it- http://ltsuspension.en.alibaba.com/p..._ID_75mm_.html

I'm not sure of the size, but I expect they can lead you in the right direction!

09-08-2015, 01:45 AM	#1
Nighthawk89 Drives: 2011 Camaro 2Ss M6 Join Date: Dec 2011 Location: Southern California Posts: 4,013	Coil Spring Covers/ Sound detonating material There has been some noise coming from my rear end on the rear left side. I mainly hear it at low speeds and when i apply pressure/bounce the car almost on the top of the rear wheel i can produce the squeak/noise. Im thinking it may be the spring but before i take it to the shop im wanting to purchase a set of those spring coil covers that youve seen on some aftermarket lowering springs in hopes of it being the fix.

09-09-2015, 12:09 PM	#2
Jeff_SS "Cam Only" Drives: 2013 Camaro SS Join Date: Nov 2011 Location: Scottsdale, AZ Posts: 1,773 View My Garage	Bump. He's looking for like what comes on the pfadt springs. To see if the sound is a quick fix, or if it's something else.. Attached Images __________________ 2013 AGM Camaro 2SS/RS M6 \| LSA Blower, 2.5" pulley, 10% lower, FIC1000's, Fore Innovations Twin Pump fuel system w/ Flex Fuel, CMS Custom Grind Cam, Kooks 1 7/8" headers w/ catless off-road pipes, NPP Exhaust, 3.91's, JLT ZL1 Intake, Prospeed Heat Exchanger, Monster S Series Triple Disc Clutch \| Pfadt Suspension, 1LE Sway Bars \| DSS 1000hp axles \| Mickey Thompson ET Street R 305/45/18 \| Tuned by Ryne @ CMS E85: 734rwhp/674rwtq

09-09-2015, 02:21 PM	#3
Ventmaster Drives: 2017 1SS 6spd Join Date: Jan 2011 Location: Utah Posts: 3,024	This may do it- http://ltsuspension.en.alibaba.com/p..._ID_75mm_.html I'm not sure of the size, but I expect they can lead you in the right direction!