Hydrographics in Maryland - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

QmaroSS · 09-24-2015, 08:02 PM

Can anyone point me towards a good Hydrographics shop in Maryland? If you have used that shop can you rate them on their workmanship?

BluePhoenix · 09-25-2015, 05:41 AM

Think there is a place that has a stand set up at the Ocean City Cruisin' week car shows, if you are still searching then I'll grab their info for you.

motorhead · 09-25-2015, 06:00 AM

My neighbor does it back here in PA and he's very good. He's been a body man for over 25 years and a good one too. So it's a natural fit unlike most of the hacks that had just ran out and bought a dip tank
and now their experts. At least in my area, there are a lot of hacks with dip tanks.

QmaroSS · 09-25-2015, 02:21 PM

Quote:

Originally Posted by BluePhoenix

Think there is a place that has a stand set up at the Ocean City Cruisin' week car shows, if you are still searching then I'll grab their info for you.

Yes, if you can locate their contact information for me that would be great.

Quote:

Originally Posted by motorhead

My neighbor does it back here in PA and he's very good. He's been a body man for over 25 years and a good one too. So it's a natural fit unlike most of the hacks that had just ran out and bought a dip tank
and now their experts. At least in my area, there are a lot of hacks with dip tanks.

Do you think he would do some parts for me? If you don't want to share his information on the thread please feel free to PM me.

motorhead · 09-25-2015, 02:25 PM

Quote:

Originally Posted by QmaroSS

Yes, if you can locate their contact information for me that would be great.

Do you think he would do some parts for me? If you don't want to share his information on the thread please feel free to PM me.

I bet he would. I wasn't sure if it was okay to plug him in a post. I can PM you his info. He's very good. What parts are you wanting done? I can ask him. I usually see him on the weekends.

QmaroSS · 09-25-2015, 08:40 PM

Quote:

Originally Posted by motorhead

I bet he would. I wasn't sure if it was okay to plug him in a post. I can PM you his info. He's very good. What parts are you wanting done? I can ask him. I usually see him on the weekends.

I have a strut tower brace the I would like to get dipped.

BluePhoenix · 10-05-2015, 07:36 AM

I will get the info for the vendor, if I see him there this weekend. I know the stuff he had on display looked great. He did everything Hydrocarbon to Hydrographics.

09-24-2015, 08:02 PM	#1
QmaroSS No regrets the red one! Drives: 2012 Victory Red 2SS Join Date: Jun 2012 Location: Dallastown, PA Posts: 482 View My Garage	Hydrographics in Maryland Can anyone point me towards a good Hydrographics shop in Maryland? If you have used that shop can you rate them on their workmanship? __________________ StainlessWorks LT (JetHot Coating) + HFC + Performance Connect, 3" SW Retro Cat-back, Roto-Fab CF CAI, Bo White PO TB, R1Concepts Drilled-Slotted Rotors, Hawk Ceramic Pads, AirLift Performance 3H suspension, MPD1 Rear Spoiler, Heritage Grill w/ Red SS Sparks Emblem, SLP Front Splitter, NightOwl V2 Halo Kit, Roto-Fab Red Engine cover w/ CF Plenum & Fuse Box Cover

09-25-2015, 05:41 AM	#2
BluePhoenix Drives: 23 Camaro 2SS 1LE Join Date: Jul 2013 Location: Hanover, PA Posts: 3,374	Think there is a place that has a stand set up at the Ocean City Cruisin' week car shows, if you are still searching then I'll grab their info for you. __________________ 2023 Camaro 2SS 1LE, A10, Summit White, 1100 - 3/23/2023 2000 - 3/27/2023 3000 - 3/28/2023 3000 - 4/04/2023 — 4/24 TPW 3400 - 4/12/2023 — 4/24 TPW 3800 - 4/28/2023 - Delayed ETA VIN: 1G1FH1R73P0145237 5/10/2023 - ETA 5/27/2023 5000 - 5/30/2023 6000 - 6/3/2023 2024 GMC Sierra 1500

10-05-2015, 07:36 AM	#7
BluePhoenix Drives: 23 Camaro 2SS 1LE Join Date: Jul 2013 Location: Hanover, PA Posts: 3,374	I will get the info for the vendor, if I see him there this weekend. I know the stuff he had on display looked great. He did everything Hydrocarbon to Hydrographics. __________________ 2023 Camaro 2SS 1LE, A10, Summit White, 1100 - 3/23/2023 2000 - 3/27/2023 3000 - 3/28/2023 3000 - 4/04/2023 — 4/24 TPW 3400 - 4/12/2023 — 4/24 TPW 3800 - 4/28/2023 - Delayed ETA VIN: 1G1FH1R73P0145237 5/10/2023 - ETA 5/27/2023 5000 - 5/30/2023 6000 - 6/3/2023 2024 GMC Sierra 1500

09-25-2015, 06:00 AM	#3
motorhead Drives: Love the one you're with Join Date: Sep 2009 Location: Downtown Charlie Brown Posts: 11,849	My neighbor does it back here in PA and he's very good. He's been a body man for over 25 years and a good one too. So it's a natural fit unlike most of the hacks that had just ran out and bought a dip tank and now their experts. At least in my area, there are a lot of hacks with dip tanks.