700+ HP Pump Gas Stroker with LLR - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

cammotion perf · 10-27-2015, 06:47 PM

Hey Guys. Check out this pump gas stroker making 700+ crank horsepower with our LLR Low Lash Roller solid cam. He is also using the new Dart Pro1 LS3 heads on a 4" bore. The cam specs are 247/259 110.5 LSA installed on 107 ICL. It is .660" intake lift and .650" exhaust lift.

1989GTA · 10-27-2015, 08:52 PM

Nice numbers. That should be over 550rwhp.

62nalide · 10-27-2015, 09:45 PM

I'm currently looking into those heads also. Nice!

cammotion perf · 10-28-2015, 12:05 PM

Here is an article on this build on LSXTV:

http://www.lsxtv.com/tech-stories/en...ild-with-ffre/

JDP Motorsports · 10-28-2015, 02:25 PM

Very nice!

Kind regards,

Jordan Priestley
888.308.6007

Josh @ Spartan LSX · 11-02-2015, 09:47 AM

What's the compression ratio & which rockers? I'm too lazy to click the link. LOL Nice job as always by Cam Motion. Except no substitutes if you want a quality product that won't fall apart inside your engine within 20K miles!

SSeniorMoment · 11-02-2015, 12:29 PM

Very nice, may have to push forward with the phase 2 416 stroker. ......think you can help me out?

cammotion perf · 11-04-2015, 09:59 AM

Quote:

Originally Posted by Josh @ Spartan LSX

What's the compression ratio & which rockers? I'm too lazy to click the link. LOL Nice job as always by Cam Motion. Except no substitutes if you want a quality product that won't fall apart inside your engine within 20K miles!

11.5:1 and was dynoed on 93 octane pump gas. The rocker arms used were T&D shaft mounted aluminum roller rocker arms.

Quote:

Originally Posted by SSeniorMoment

Very nice, may have to push forward with the phase 2 416 stroker. ......think you can help me out?

You know we can.

10-27-2015, 06:47 PM	#1
cammotion perf Drives: cam tech Join Date: Jun 2014 Location: baton rouge , la. Posts: 30	700+ HP Pump Gas Stroker with LLR Hey Guys. Check out this pump gas stroker making 700+ crank horsepower with our LLR Low Lash Roller solid cam. He is also using the new Dart Pro1 LS3 heads on a 4" bore. The cam specs are 247/259 110.5 LSA installed on 107 ICL. It is .660" intake lift and .650" exhaust lift.

10-27-2015, 08:52 PM	#2
1989GTA Drives: 1989 GTA Trans Am Join Date: Jun 2012 Location: Cypress, California Posts: 610	Nice numbers. That should be over 550rwhp. Last edited by 1989GTA; 10-28-2015 at 04:29 PM. Reason: Changed RWHP numbers

10-27-2015, 09:45 PM	#3
62nalide Drives: 2013 SS Join Date: May 2013 Location: DFW Posts: 4,102	I'm currently looking into those heads also. Nice! __________________ https://frankensteined.net/ Martin@Frankensteined.net

10-28-2015, 12:05 PM	#4
cammotion perf Drives: cam tech Join Date: Jun 2014 Location: baton rouge , la. Posts: 30	Here is an article on this build on LSXTV: http://www.lsxtv.com/tech-stories/en...ild-with-ffre/

10-28-2015, 02:25 PM	#5
JDP Motorsports Drives: 2011 Camaro SS/ 2016 Camaro SS Join Date: Jun 2009 Location: Sandy, Utah Posts: 3,256	Very nice! Kind regards, Jordan Priestley 888.308.6007

11-02-2015, 09:47 AM	#6
Josh @ Spartan LSX Drives: A wrench Join Date: Jan 2010 Location: East Atlanta Posts: 353	What's the compression ratio & which rockers? I'm too lazy to click the link. LOL Nice job as always by Cam Motion. Except no substitutes if you want a quality product that won't fall apart inside your engine within 20K miles!

11-02-2015, 12:29 PM	#7
SSeniorMoment Drives: 2010 2SS/RS LS3 A6 IOM Join Date: May 2013 Location: Arizona Posts: 1,192	Very nice, may have to push forward with the phase 2 416 stroker. ......think you can help me out?