You are browsing camaro5 
 |
|
10-30-2015, 07:56 AM
|
#1 |
 
Drives: Moneypit Join Date: Nov 2013
Location: Jax FL
Posts: 164
|
Fuel pump replacement question
I just replaced my fuel pumps and cranked it up, all good. I just remembered I forgot to connect the line at the bottom of the fuel pump bucket. It's the quick connect line that stays in the tank when you remove the pump.
What does this line do? Most important does it have to be hooked up? Thanks in advance |
|
|
|
10-30-2015, 09:44 AM
|
#2 |
  Drives: camaro ss\rs Join Date: Jun 2014
Location: Italia
Posts: 755
|
It should be the connection from the other part of the tank.
__________________
2014 camaro SS Whipple powered ,3.750 pulley,ID850, CAI,Flowmaster American Thunder exhaust,MGW racing shifter,Bo White ported tb,MightyMouse Catch Can,Vitesse throttle controller,GM 3.91 rear end, Dynatech longtube haders, BTR Pd cam,Fluidampr stock pulley,ZL1 fuel pump and ADM fpcm, Phastek scoop and fluid thank relocation Bmr Motor mount . Tuned by Mastuning
|
|
|
|
|
10-30-2015, 11:27 AM
|
#3 |
       
Drives: 2010 Turbo LS3 Join Date: Dec 2009
Location: Palm Bay, FL
Posts: 3,041
|
I believe it allows the bucket's venturi system to pull fuel from another area of the tank during hard cornering, but I could be wrong.
__________________
2010 SS - Kind of an On3 kit, CTR 78/80, CompCam 239/251 620/632 122+4, E85, Z28 suspension and ZL1 diff with Outlaw axles. Gen6 ZL1 brakes.
2011 Vert - 416/w 230/236 .612/.602 115lsa, 1LE suspension w/32mm rear bar. Z28 diff. Gen6 ZL1 brakes. |
|
|
|
|
10-30-2015, 11:31 AM
|
#4 |
|
Drives: Moneypit Join Date: Nov 2013
Location: Jax FL
Posts: 164
|
Thanks
|
|
|
|
|
10-31-2015, 09:59 AM
|
#5 |
|
old school chevy rodder
|
wow a new fuel pump/pumps and I work off the stock everything..... you install a zl1 pump for something? planning on cornering a lot?
__________________
2021 Wild Cherry ZL1 A10, Sunroof, Data,Red Carbon Interior, Nav, RotoFab Big Gulp , Elite x2ultra, Borla ATAK, Driveshaft shop, BMR susp, Speed covers, intercoolers, ATI , 2650 MAG, DSX lid, 103 NW, TSP Longtubes & cats, LPE, 1le mods, ,LME cover, Katech pump and chain, Trunnions, BTR stage 2, LPE boostapump, Gforce, Speed eng , Granetteli, etc etc
 |
|
|
|
|
10-31-2015, 12:40 PM
|
#6 |
 Drives: 2010 Camaro SS Join Date: Oct 2013
Location: Saskatoon SK Can. Eh
Posts: 365
|
That line draws fuel from the other side of the saddle shaped tank.
You will not be able to use all the fuel in the tank. Best fix it.
__________________
 2010 Camaro SS RS, Maggie with 3.4" pulley, 60# injectors, ADM dual fuel pumps, ADM Stage 2 Cam with Brian Tooley springs and pushrods, black CAI intake, Stainless Works long tube headers w/gutted cats, ZL1 Diff w/offset bushings, Pfadt lowering springs, Pfadt sway bars, Pfadt solid sub frame mounts, BMR trailing arms and toe rods, Hurst short throw shifter, Painted on Hugger Orange stripes, Forgestar F14 Piano Black wheels, Nitto NT05 rubber. |
|
|
|
|
|
|
|
 |
|
|
