You are browsing camaro5 
 |
|
10-31-2015, 04:34 PM
|
#1 |
 
|
Carbon fiber fender/engine bay strips
I am selling some carbon fiber engine bay strips that run along the fenders. They attach with the supplied 3M tape. They can either cover the top fender bolt as pictured on the silver car, you can run the bolt thru a hole that you would drill in the strip(use LocTite since bolt can not be torqued down) or you can drill the hole big enough that the entire head comes thru. $55 for two strips and 3M tape shipped. Payment via Paypal.
__________________
2010 LS3 SW long tubes w/hi flow cats, X-pipe into a Pypes exhaust, custom ground Comp cam with hardened pushrods and .660 lift springs, BBK 102mm throttle body, K&N CAI,JET MAF, Mayhem Motorsports tune, Forged 360 rim w/ Nitto 315 rears and 275 front, H&R 2"lowering springs.
|
|
|
|
11-01-2015, 01:35 PM
|
#2 |
 
Drives: 2010 camaro ss Join Date: Mar 2014
Location: alexandria, la
Posts: 98
|
I'm interested pm sent
|
|
|
|
|
11-07-2015, 12:17 PM
|
#3 |
|
|
Sorry for the delay in answering your question Vidrine, I never got an email notification. PM answered. These are new and are made when ordered. Any questions, please ask and I will pay more attention to this page!!
__________________
2010 LS3 SW long tubes w/hi flow cats, X-pipe into a Pypes exhaust, custom ground Comp cam with hardened pushrods and .660 lift springs, BBK 102mm throttle body, K&N CAI,JET MAF, Mayhem Motorsports tune, Forged 360 rim w/ Nitto 315 rears and 275 front, H&R 2"lowering springs.
|
|
|
|
|
11-08-2015, 11:59 AM
|
#4 |
         
|
Do you have in non carbon fiber?
Sent from my iPhone using Tapatalk
__________________
Cold Air Inductions CAI Stainless Power LT's with HFC's Flowmaster American Thunder Cat Back APEX Scoop and WW Relocation Kit VMAX Ported Throttle Body Custom Dyno Tune Pfadt 1.25" Lowering Springs ZL1 Rims on 275 front 315 Rear custome underlay vinyl wrap Anvil Spoiler heritage grill APR Front Splitter Custom Emblempros emblems ZL1 Side Skirts 416.5 whp 410 torque (CURRENTLY) Up Next: BTR Stage 3 Cam and supporting mods (in garage now)
|
|
|
|
|
11-08-2015, 12:04 PM
|
#5 |
 
Drives: 2021 ZL1 1LE Satin Steel Join Date: Jul 2011
Location: Brownsburg, Indiana
Posts: 6,359
|
Do you have a closeup of the CF pattern?
Would like it to match   Ryan
__________________
Ryan
2021 ZL1 1LE Satin Steel Metallic Build Page: https://www.camaro6.com/forums/showthread.php?t=632481 |
|
|
|
|
11-08-2015, 01:24 PM
|
#6 |
|
|
Twenty ten, I can make some in a thin metal if you would like, just let me know. I would send them primed and ready to paint.
Ryan, I can take a picture and text it to you. Just PM me your #. Thank you for your interest!!
__________________
2010 LS3 SW long tubes w/hi flow cats, X-pipe into a Pypes exhaust, custom ground Comp cam with hardened pushrods and .660 lift springs, BBK 102mm throttle body, K&N CAI,JET MAF, Mayhem Motorsports tune, Forged 360 rim w/ Nitto 315 rears and 275 front, H&R 2"lowering springs.
|
|
|
|
|
11-08-2015, 01:27 PM
|
#7 |
|
|
Ryan, its the normal 2x2 twill
__________________
2010 LS3 SW long tubes w/hi flow cats, X-pipe into a Pypes exhaust, custom ground Comp cam with hardened pushrods and .660 lift springs, BBK 102mm throttle body, K&N CAI,JET MAF, Mayhem Motorsports tune, Forged 360 rim w/ Nitto 315 rears and 275 front, H&R 2"lowering springs.
|
|
|
|
|
11-08-2015, 03:50 PM
|
#8 |
|
Drives: 2021 ZL1 1LE Satin Steel Join Date: Jul 2011
Location: Brownsburg, Indiana
Posts: 6,359
|
Sent a PM
Ryan
__________________
Ryan
2021 ZL1 1LE Satin Steel Metallic Build Page: https://www.camaro6.com/forums/showthread.php?t=632481 |
|
|
|
|
11-09-2015, 03:11 AM
|
#9 |
|
|
Ryan, pm and payment rec'd. Will let you know when they ship. Thank you!! Who is next?
__________________
2010 LS3 SW long tubes w/hi flow cats, X-pipe into a Pypes exhaust, custom ground Comp cam with hardened pushrods and .660 lift springs, BBK 102mm throttle body, K&N CAI,JET MAF, Mayhem Motorsports tune, Forged 360 rim w/ Nitto 315 rears and 275 front, H&R 2"lowering springs.
|
|
|
|
|
11-09-2015, 06:49 AM
|
#10 |
 Drives: 1le Join Date: Apr 2014
Location: indiana
Posts: 154
|
How much for primed and ready to paint ones pm me
|
|
|
|
|
11-09-2015, 08:03 PM
|
#11 |
|
|
Metal strips primed and ready for paint will run $35 for the set shipped. Thank you for the interest!!
__________________
2010 LS3 SW long tubes w/hi flow cats, X-pipe into a Pypes exhaust, custom ground Comp cam with hardened pushrods and .660 lift springs, BBK 102mm throttle body, K&N CAI,JET MAF, Mayhem Motorsports tune, Forged 360 rim w/ Nitto 315 rears and 275 front, H&R 2"lowering springs.
|
|
|
|
|
11-11-2015, 01:36 AM
|
#12 |
|
|
ttt
__________________
2010 LS3 SW long tubes w/hi flow cats, X-pipe into a Pypes exhaust, custom ground Comp cam with hardened pushrods and .660 lift springs, BBK 102mm throttle body, K&N CAI,JET MAF, Mayhem Motorsports tune, Forged 360 rim w/ Nitto 315 rears and 275 front, H&R 2"lowering springs.
|
|
|
|
|
11-13-2015, 02:34 PM
|
#13 |
|
|
ttt
__________________
2010 LS3 SW long tubes w/hi flow cats, X-pipe into a Pypes exhaust, custom ground Comp cam with hardened pushrods and .660 lift springs, BBK 102mm throttle body, K&N CAI,JET MAF, Mayhem Motorsports tune, Forged 360 rim w/ Nitto 315 rears and 275 front, H&R 2"lowering springs.
|
|
|
|
|
11-14-2015, 01:29 PM
|
#14 |
|
Drives: 2021 ZL1 1LE Satin Steel Join Date: Jul 2011
Location: Brownsburg, Indiana
Posts: 6,359
|
Got em today. These are very nice. Need to get em installed
Here are a few photos just laying down   Ryan
__________________
Ryan
2021 ZL1 1LE Satin Steel Metallic Build Page: https://www.camaro6.com/forums/showthread.php?t=632481 |
|
|
|
|
|
|
|
 |
|
|
