12-12-2015, 04:17 PM | #1 |
Drives: 2014 Camaro SS/RS Join Date: Mar 2015
Location: North
Posts: 133
|
No Fly Zone Arizona
So I just got my car back from CPR, it made 614/535. I will be running tomorrow at the 1/2 mile roll racing event, I was wondering what mph should I be expecting. I am running on 19s with stock gearing. The car has a custom grind from Joe@CPR, an ecs kit, along with methanol injection. I'm hoping for high 150s, maybe even break 160. Do you think it's possible?
|
12-12-2015, 04:35 PM | #2 |
Drives: 2010 2SS/RS LS3 A6 IOM Join Date: May 2013
Location: Arizona
Posts: 1,190
|
Dunno, sounds like a nice build. Friends modified 2014 Shelby Mustang, ~800hp, was in the 160s, this past October.
We are forecast for wind here. |
12-12-2015, 06:01 PM | #3 |
Drives: 2014 Camaro SS/RS Join Date: Mar 2015
Location: North
Posts: 133
|
|
12-12-2015, 07:07 PM | #4 |
Treasure Coast Camaro 5
|
Yes with a roll.
__________________
|
12-12-2015, 08:49 PM | #5 |
Drives: 2014 Camaro SS/RS Join Date: Mar 2015
Location: North
Posts: 133
|
|
12-13-2015, 08:38 AM | #6 |
Drives: 2014 zl1 Join Date: Nov 2013
Location: sedona az
Posts: 58
|
where do they do this ?
|
12-13-2015, 03:04 PM | #7 |
Drives: 2010 SS RS Join Date: Jan 2015
Location: AZ
Posts: 406
|
When I was there at the last event I hit 148mph with 470whp.
__________________
Stainless Power Longtube headers, off road mids, stock H pipe, flowmaster mufflers, Vararam tune model intake, NightFury cam, and 91 octane email tune from Dynosteve @ rdpmotorsport.com. 473 rwhp and 430 ft. Lbs. @3,235 ft elevation.
|
12-13-2015, 06:57 PM | #8 |
Treasure Coast Camaro 5
|
Yeah doing a 1/2 mile in Jan.
__________________
|
12-13-2015, 10:24 PM | #9 |
"Cam Only"
|
In a standing half mile, (with no rollout like this event) I hit 148mph with 483rwhp.
Cam only with 3.91 gears. This was at shift s3ctor. Exactly 2640 feet. If you have over 600 wheel, you should be in the 160's. If there is a rollout where you're going 40mph already, then absolutely it should be a cake-walk to hit 160...
__________________
2013 AGM Camaro 2SS/RS M6 | LSA Blower, 2.5" pulley, 10% lower, FIC1000's, Fore Innovations Twin Pump fuel system w/ Flex Fuel, CMS Custom Grind Cam, Kooks 1 7/8" headers w/ catless off-road pipes, NPP Exhaust, 3.91's, JLT ZL1 Intake, Prospeed Heat Exchanger | Pfadt Suspension, 1LE Sway Bars | DSS 1000hp axles | Mickey Thompson ET Street R 305/45/18 |
Tuned by Ryne @ CMS E85: 734rwhp/636rwtq (mustang dyno) |
12-14-2015, 12:07 AM | #10 |
Drives: 2014 Camaro SS/RS Join Date: Mar 2015
Location: North
Posts: 133
|
So a little update, I was able to get 156.7 in the 1/2 mile. It's not bad considering a 702whp auto zl1 was running 160. The next 1/2 mile event will be in February and I should be around 700whp so I think I might be able to get mid 160s.
|
12-14-2015, 12:41 AM | #11 |
Drives: 2010 2SS/RS LS3 A6 IOM Join Date: May 2013
Location: Arizona
Posts: 1,190
|
Very respectictible. Friends Shelby did 162, traction issues with the Goodyears.
|
12-14-2015, 10:16 AM | #12 |
Drives: 2014 Camaro SS/RS Join Date: Mar 2015
Location: North
Posts: 133
|
|
12-14-2015, 01:26 PM | #13 | |
Drives: 2011 ss Join Date: May 2013
Location: va
Posts: 983
|
Quote:
|
|
12-15-2015, 02:54 AM | #14 | |
"Cam Only"
|
Quote:
Big difference between standing half mile and a "half mile" with a 1/8th mile rollout...
__________________
2013 AGM Camaro 2SS/RS M6 | LSA Blower, 2.5" pulley, 10% lower, FIC1000's, Fore Innovations Twin Pump fuel system w/ Flex Fuel, CMS Custom Grind Cam, Kooks 1 7/8" headers w/ catless off-road pipes, NPP Exhaust, 3.91's, JLT ZL1 Intake, Prospeed Heat Exchanger | Pfadt Suspension, 1LE Sway Bars | DSS 1000hp axles | Mickey Thompson ET Street R 305/45/18 |
Tuned by Ryne @ CMS E85: 734rwhp/636rwtq (mustang dyno) |
|
|
|
|
|