ADM New Intake Lid Pics - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

ADM PERFORMANCE · 09-19-2009, 10:30 AM

Just had the first one of these installed yesterday at the shop.This will be the lid that all of our Intakes will get from here forward..HOPE YOU LIKE!

Andy

tribone · 09-19-2009, 10:44 AM

Very nice. I like

o2camaross · 09-19-2009, 10:57 AM

nice andy

JJ2010 · 09-19-2009, 11:01 AM

That is sharp looking......

freemaSSon · 09-19-2009, 11:04 AM

Guys I have been watching this design come together over the past couple weeks and I have to admit I was reserving judgment until AFTER COMPLETETION.

I am glad I did because during the design phase I would have voted a NO but HOLY HELL this lid is absolutely GORGEOUS.

For those that have known Andy for many years he is the type of person that believes FUNCTION OVER FORM ALWAYS. Well this lid is a design departure because the FUNCTION was perfected and proven time and again with the DYNO or recently with time slips. Andy rarely if ever goes back to redesign FORM into a PROVEN product but GD I'm glad he did. I am testing a new part for Andy and am not able to run the finished VERSION 2 air box YET. (which by the way is going GREAT brother)

This picture looks great but it does not do the appearance justice. With this added FORM to the design ADM's intake is not only the HANDS DOWN best performing it has just reached the APPEARANCE TOP AWARD!

Melson · 09-19-2009, 11:09 AM

Quote:

Originally Posted by freemaSSon

Guys I have been watching this design come together over the past couple weeks and I have to admit I was reserving judgment until AFTER COMPLETETION.

I am glad I did because during the design phase I would have voted a NO but HOLY HELL this lid is absolutely GORGEOUS.

For those that have known Andy for many years he is the type of FUNCTION OVER FORM ALWAYS. Well this lid is a design departure because the FUNCTION was perfected and proven time and again with the DYNO or recently with time slips. Andy rearely goes back to redesign FORM into a PROVEN product but GD I'm glad he did. I am testing a new part for Andy and am not able to run the finished DESIGN #2 air box YET. (which by the way is going GREAT brother)

This picture looks great but it does not do the appearance justice. With this added FORM to the design ADM's intake is not only the HANDS DOWN best performing it has just reached the APPEARANCE TOP AWARD!

I guess I will have to get one of these to replace the old one..........

Mark

10aSSee D · 09-19-2009, 11:26 AM

Same here bummer.

*TAG UR IT* · 09-19-2009, 01:27 PM

Very nice, clean look!

Crowley · 09-19-2009, 01:33 PM

Quote:

Originally Posted by Melson

I guess I will have to get one of these to replace the old one..........

Mark

Andy .. what is the price to replace the old?

Thanks,
Crowley

madmaxx18 · 09-19-2009, 02:51 PM

could you post some more pics.

alfie43 · 09-19-2009, 02:58 PM

Please post more photos. May I suggest that you use your flash. The original photo was to dark and didn't show the details.

A price for the complete updated design would be helpful for us newer forum members. Also, any info on performance gains?
Alfie

ADM PERFORMANCE · 09-19-2009, 03:44 PM

Quote:

Originally Posted by alfie43

Please post more photos. May I suggest that you use your flash. The original photo was to dark and didn't show the details.

A price for the complete updated design would be helpful for us newer forum members. Also, any info on performance gains?
Alfie

Price stayed the same - $499

Performance gains on our dyno and others is 18-19 rwhp and torque with no tune.

Very good read here - http://www.camaro5.com/forums/showth...ght=adm+intake

Andy

ADM PERFORMANCE · 09-19-2009, 03:44 PM

Quote:

Originally Posted by madmaxx18

could you post some more pics.

More detailed photos coming this week.

rex113 · 09-19-2009, 03:56 PM

I must say that is one nice looking system you have there.

09-19-2009, 10:30 AM	#1
ADM PERFORMANCE Drives: Anything I want Join Date: Oct 2008 Location: DfW - Texas Posts: 5,408	ADM New Intake Lid Pics Just had the first one of these installed yesterday at the shop.This will be the lid that all of our Intakes will get from here forward..HOPE YOU LIKE! Andy

09-19-2009, 11:04 AM	#5
freemaSSon Pat @ ADM PERFORMANCE Drives: CGM SS/RS M6 Join Date: Aug 2009 Location: Prosper, TX Posts: 506	Guys I have been watching this design come together over the past couple weeks and I have to admit I was reserving judgment until AFTER COMPLETETION. I am glad I did because during the design phase I would have voted a NO but HOLY HELL this lid is absolutely GORGEOUS. For those that have known Andy for many years he is the type of person that believes FUNCTION OVER FORM ALWAYS. Well this lid is a design departure because the FUNCTION was perfected and proven time and again with the DYNO or recently with time slips. Andy rarely if ever goes back to redesign FORM into a PROVEN product but GD I'm glad he did. I am testing a new part for Andy and am not able to run the finished VERSION 2 air box YET. (which by the way is going GREAT brother) This picture looks great but it does not do the appearance justice. With this added FORM to the design ADM's intake is not only the HANDS DOWN best performing it has just reached the APPEARANCE TOP AWARD! __________________ "old age and treachery will always overcome youth and ambition" author unknown "There are two types of racers: cheaters...and losers." Smokey Yunick

09-19-2009, 11:26 AM	#7
10aSSee D Drives: Silver 2010 SS Camaro Join Date: Jul 2009 Location: TN Posts: 2,562	Same here bummer. __________________ MODS: ADM built 417, 2.9L Whipple with 3.250 pulley, ADM ported and polished LSA heads,ADM stage3 cam,ADM LSA belt drive system,ADM CAI race scoop, ADM dual fuel pumps, ID 850's, BMR full suspension, Gforce 9 inch kit with 3.5 inch driveshaft, Street Slayer twin carbon clutch, Lingenfelter oil seperator. Tuned by built by ADM Performance, 763rwhp,705rwtq

09-19-2009, 02:58 PM	#11
alfie43 Drives: S/C 2SS/RS Camaro-6M-VicRed Join Date: Aug 2009 Location: Alfie (Mariano) lives in Shelby Twp, Metro-Detroit Posts: 1,119 View My Garage	More photos Please post more photos. May I suggest that you use your flash. The original photo was to dark and didn't show the details. A price for the complete updated design would be helpful for us newer forum members. Also, any info on performance gains? Alfie __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ADM / Magnaflow 3" system for the ARH Catted system - Pics and thoughts	Crowley	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	26	09-17-2009 05:51 PM
ADM boost guage pics (3 of them)	Crowley	Forced Induction - V8	29	09-08-2009 08:07 PM
Trunk Lid Magnetic Black Vinyl Pics	Blue Demon	Camaro Photos \| Spyshots \| Video \| Media Gallery	23	09-01-2009 11:43 AM
Updated pics (ADM Boost Gauge - TVS 2300 Blower installed)	Crowley	Camaro Photos \| Spyshots \| Video \| Media Gallery	4	08-24-2009 08:35 AM
Teaser pics of the TVS 2300 and ADM Street Intake	Crowley	Camaro Photos \| Spyshots \| Video \| Media Gallery	9	08-22-2009 11:44 PM

09-19-2009, 10:44 AM	#2
tribone Searchin' .... Drives: Powered by Bowtie Join Date: Jun 2008 Location: Camaroville Posts: 6,229 View My Garage	Very nice. I like __________________ -Guillermo My Pictures

09-19-2009, 10:57 AM	#3
o2camaross Drives: 2010 2SS/RS & 04 silvy Join Date: Mar 2008 Location: Driving Posts: 362	nice andy

09-19-2009, 11:01 AM	#4
JJ2010 Drives: 2010 Camaro SS Join Date: Oct 2008 Location: Smithfield,NC Posts: 1,203	That is sharp looking......

09-19-2009, 01:27 PM	#8
TAG UR IT www.Camaro5store.com Drives: 2014 ZL1 #705 Join Date: Jul 2006 Location: SA, Texas Posts: 26,544 View My Garage	Very nice, clean look!

09-19-2009, 02:51 PM	#10
madmaxx18 Drives: 07_tundra/08_zo6 Join Date: Jun 2009 Location: Wichita falls, tx Posts: 722	could you post some more pics.

09-19-2009, 03:56 PM	#14
rex113 Drives: 2010 2ss silver/cyb Join Date: Feb 2009 Location: nj Posts: 200	I must say that is one nice looking system you have there.