01-07-2016, 02:36 PM | #1 |
Speed Freak
Drives: 2013 ZL1 Camaro, 2016 Camaro SS Join Date: Jun 2013
Location: Ardmore, OK
Posts: 2,637
|
I finially have an engine
My ZL1 has not run for an entire year but my new engine just shipped out today. Don't know how long until I'm running again but having a working engine is a step in the right direction. If you are interested in looking at the dyno test it is on my build thread post number 177. Man do I miss my car.
Here is a link to the build thread: http://www.camaro5.com/forums/showth...=1#post8829103
__________________
2016 SS -AGP twin Borg Warner 7163 EFR's, LT4 mechanical pump, LT4 injectors, Walbro 255 low side, Castrol SRF. 734whp/759 tq
2013 ZL1 -ADM - 427 LSX 6 bolt, O-ringed block built by LME. Twin PT6466 turbos. RPM custom manual trans, RPS Quad carbon clutch, 9" Hendrix rear diff & axles. ADM/squash fuel system, Ron Davis radiator, Spal fans, AGP air to air, turbo plumbing. LPE oil cooler, rear bushing upgrade, roll bar...etc. rwhp 1400+... 212.5mph, best Texas mile to date. |
01-07-2016, 02:48 PM | #2 |
Drives: 2013 ZL1 Join Date: Mar 2013
Location: Oklahoma
Posts: 2,316
|
Well cool Jess!! It is about time. I am anxious for you to get it running to so I can see what you have to say about it. Keep all of us in the know!
|
01-07-2016, 03:04 PM | #3 |
KaBoom1701
Drives: 13' ZL1 Red M6 Join Date: Dec 2012
Location: I.E. SoCal (Yucaipa)
Posts: 8,631
|
Very cool.
Cant wait to see you put it all back together again.
__________________
Mods:
Roto-Fab Intake, WW Res. kit & Big Gulp Air Scoop, Elite Catch Can, ATI Super Damper & 18% OD Pulley, LF Idler pulley bracket, Metco CC breather, ID850 Injectors, Stainless Power Headers w/ ceramic coating, TR71X Spark Plugs, JMS Fuel Pump Booster, Bo White TB, Tuned by Ted @ Jannetty Racing, Ron Davis HX, D3 Reservoir, Pfadt 1" Springs, Moreno Camber Plates, ZL1 Addons Splitter guard washers, Tow Hook kit & rock guards, Hurst Shifter Billet Plus 6 Speed Short Shifter, ZL1 DRL lighting harness, ZL1 Recaro Seats. |
01-07-2016, 03:24 PM | #4 |
Drives: 2013 ZL1, 2016 Denali HD Join Date: Jun 2013
Location: Greensboro Ga.
Posts: 540
|
That sure is a step in the right direction......Can't wait to see the finished product. Congrats.....
__________________
LSX 427, Twin Precision Turbo's, 64/66. Nitrous Outlet System. Pro EFI Engine Management Systems. Vengeance Racing Built......
|
01-07-2016, 04:31 PM | #5 |
Drives: 2013 Camaro ZL1 Join Date: Dec 2012
Location: Dallas, Texas
Posts: 2,155
|
I'm happy, that you're happy! Congratulations Jess.
|
01-07-2016, 05:31 PM | #6 |
Drives: 2013 Camaro ZL1 Join Date: Nov 2012
Location: Dubuque, IA
Posts: 880
|
Will Andy be doing the build?
__________________
13 ZL1 A6
LSX 427 with AGP Twin Turbos, E85 and Flex Fuel. Built and tuned by ADM Performance 1000rwhp |
01-07-2016, 05:37 PM | #7 |
Drives: 2013 Camaro ZL1 A6 Join Date: May 2013
Location: Slidell, La
Posts: 248
|
I need some of that Jessrayo money......
__________________
SOLD 2013 Camaro ZL1 M6 2013 ZL1 A6- Still completely stock. |
01-07-2016, 05:47 PM | #8 |
Speed Freak
Drives: 2013 ZL1 Camaro, 2016 Camaro SS Join Date: Jun 2013
Location: Ardmore, OK
Posts: 2,637
|
Engine was assembled by LME in Houston. It is a 1500+ whp iron block with 6 bolt O-ringed heads and copper head gaskets. Engine is shipping to ADM assembled and ready to install.
ADM has got to hook it to the quad disc slayer clutch, rpm custom transmission, carbon driveshaft and Hendrix engineering rear. Then ADM has to hook up the custom bypass lid for the supercharger and turbos, set up the nitrous system and tune everything so it will run well enough to challenge the record for a gen 5 Camaro in the spring Texas mile..... that is the plan anyway.
__________________
2016 SS -AGP twin Borg Warner 7163 EFR's, LT4 mechanical pump, LT4 injectors, Walbro 255 low side, Castrol SRF. 734whp/759 tq
2013 ZL1 -ADM - 427 LSX 6 bolt, O-ringed block built by LME. Twin PT6466 turbos. RPM custom manual trans, RPS Quad carbon clutch, 9" Hendrix rear diff & axles. ADM/squash fuel system, Ron Davis radiator, Spal fans, AGP air to air, turbo plumbing. LPE oil cooler, rear bushing upgrade, roll bar...etc. rwhp 1400+... 212.5mph, best Texas mile to date. |
01-07-2016, 05:52 PM | #9 |
Speed Freak
Drives: 2013 ZL1 Camaro, 2016 Camaro SS Join Date: Jun 2013
Location: Ardmore, OK
Posts: 2,637
|
Yeah the car is a bit of an addiction.... because of the car I have no money... I'm still making payments on it.....
__________________
2016 SS -AGP twin Borg Warner 7163 EFR's, LT4 mechanical pump, LT4 injectors, Walbro 255 low side, Castrol SRF. 734whp/759 tq
2013 ZL1 -ADM - 427 LSX 6 bolt, O-ringed block built by LME. Twin PT6466 turbos. RPM custom manual trans, RPS Quad carbon clutch, 9" Hendrix rear diff & axles. ADM/squash fuel system, Ron Davis radiator, Spal fans, AGP air to air, turbo plumbing. LPE oil cooler, rear bushing upgrade, roll bar...etc. rwhp 1400+... 212.5mph, best Texas mile to date. |
01-08-2016, 12:00 PM | #10 | |
Drives: 2015 Camaro ZL1 Join Date: Mar 2015
Location: Dallas
Posts: 97
|
Quote:
__________________
2015 ZL1 #377
|
|
01-08-2016, 01:27 PM | #11 |
Speed Freak
Drives: 2013 ZL1 Camaro, 2016 Camaro SS Join Date: Jun 2013
Location: Ardmore, OK
Posts: 2,637
|
Well..., J&S Motorsports just published the 2016 event dates for all their land speed events this morning and my company has me scheduled for a seminar in Minneapolis on the spring Texas mile date..... so I don't know how it is all going to play out. I hate to wait until October but I have been waiting a little while already. Maybe I'll run the event in Arkansas in June...
__________________
2016 SS -AGP twin Borg Warner 7163 EFR's, LT4 mechanical pump, LT4 injectors, Walbro 255 low side, Castrol SRF. 734whp/759 tq
2013 ZL1 -ADM - 427 LSX 6 bolt, O-ringed block built by LME. Twin PT6466 turbos. RPM custom manual trans, RPS Quad carbon clutch, 9" Hendrix rear diff & axles. ADM/squash fuel system, Ron Davis radiator, Spal fans, AGP air to air, turbo plumbing. LPE oil cooler, rear bushing upgrade, roll bar...etc. rwhp 1400+... 212.5mph, best Texas mile to date. |
01-08-2016, 05:10 PM | #12 |
Drives: 2013 Camaro ZL1 Join Date: Nov 2012
Location: Dubuque, IA
Posts: 880
|
I'm working on sending my car to Andy shortly for the AGP twin turbo kit. IT IS AN ADDICTION!!!!!!!
__________________
13 ZL1 A6
LSX 427 with AGP Twin Turbos, E85 and Flex Fuel. Built and tuned by ADM Performance 1000rwhp |
01-09-2016, 04:31 PM | #13 | |
Ragtop Rocket!!!
Drives: Black on Black Convertible Join Date: Mar 2013
Location: San Antonio Texas
Posts: 809
|
Quote:
__________________
ADM built 2013 Triple Black ZL-1 Convertible M6
ADM custom cam, LPE stage 2 heads with dual valve springs, LS-3 ported throttle body, LPE 2 piece pulley, LPE overdrive balancer, 10% overdrive pulley, ported supercharger inlet, ADM race intake system, stainless works 1-7/8 headers, Injector Dynamics injectors, ADM heat exchanger, ADM dual fuel pump system, ADM exhaust switch, ADM 3 tunes tuning package. 744rwhp 727rwtq |
|
|
|
|
|