Snowy's ZL1 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

SnowyCamaro · 01-31-2016, 04:59 PM

This christmas i decided to trade my 2010 1LT for a 2013 ZL1. The new car has 4500km on it. And it is absolutely immaculate. (Don't worry, although the title suggests otherwise, she won't see any snow).

Current Engine Mods:
Catch can
Roto-fab W/w relocate
Roto-fab CAI
Skip-shift eliminator

Current Cosmetic Mods:
Matte black tailight bezels
Chrome Strut Tower covers
RGB grille and engine bay lighting
5k Led Fogs
5k Led DRLs
Splitter guard washers from Gen5DIY
1000w Stereo
Alpine pdx-f4
Focal PS 165
JL Audio TR 690txi
Alpine Mrv-M500
2 x 10" Alpine Typs S

SnowyCamaro · 01-31-2016, 05:00 PM

This year has been unbelievably mild for my area. Hence why i was able to drive the car home a week before christmas. Last year i had about 2 ft of snow on the ground. Christmas eve was 11 degrees C. So naturally i was out in a tshirt and polished the car.

SnowyCamaro · 01-31-2016, 05:00 PM

First mod. Switchblade back

SnowyCamaro · 01-31-2016, 05:03 PM

Elite engineering catch can. These are well built products from elite. Thanks to Jared at JDP!

SnowyCamaro · 02-21-2016, 10:23 PM

Got some warm weather today and installed the roto-fab intake and w/w relocate. Draining the full reservoir was a little messy but other than that went without a hitch. I also removed the ground stud and replaced it with a m6x20 bolt so i can remove the filter easily for cleaning.

SnowyCamaro · 03-12-2016, 04:14 PM

Put in the skip shift eliminator. This car is so low its impossible to get up race ramps. Luckily my friend has a lift at home.

justjoshin · 03-12-2016, 04:52 PM

what model Direct Lift is that?

SnowyCamaro · 03-13-2016, 12:09 AM

Quote:

Originally Posted by justjoshin

what model Direct Lift is that?

Pretty sure its the pro park 8. But im not 100%. My cousin has a 2 post lift from direct lift and they are great products for the value.

Ryanbabz71 · 03-13-2016, 07:11 AM

Nice car

Ryan

SnowyCamaro · 03-26-2016, 06:13 PM

3m clear bra - full wrap of bumper and mirrors plus blacked out the side markers and the emblems.

Amazing product can barely see it. Car is too dirty to post pics. But this place does some pretty cool rides, had another supercharged camaro on air ride (looked real tacky) getting a full wrap, ferrari, rolls royce and a gtr. The gtr was cool, not my cup of tea but still...

SnowyCamaro · 04-18-2016, 08:11 PM

Installed rgb lighting from diode dynamics. These are okay products. One strip stopped working in about 30 seconds the rest work perfect but a little disappointing.

Also installed 5k fogs and 5k drls from gen5diy.

SnowyCamaro · 04-18-2016, 08:18 PM

Now for the stereo build.....

Day 1 (Removal of parts)

Seat coming out

Side panels

Rear deck

^i dont know if many other zl1 owners have this but i guess the guy who ordered my car was name tim? I dunno, I'm the second owner. Pretty cool

6x9s out

Trunk stripped

Passenger door card out

Driver door card out

All the parts (not bad for 3 hrs work)

SnowyCamaro · 04-18-2016, 08:20 PM

Broke 6 clips...not too bad. I'll have to run to the dealer in the morning.

hctrble · 04-19-2016, 06:12 PM

Keep up the pics on the stereo build. What are the replacements?

Steve

01-31-2016, 04:59 PM	#1
SnowyCamaro Drives: 2013 Camaro ZL1, 2006 Chevy Equinox Join Date: Apr 2013 Location: Ontario, Canada Posts: 833	Snowy's ZL1 This christmas i decided to trade my 2010 1LT for a 2013 ZL1. The new car has 4500km on it. And it is absolutely immaculate. (Don't worry, although the title suggests otherwise, she won't see any snow). Current Engine Mods: Catch can Roto-fab W/w relocate Roto-fab CAI Skip-shift eliminator Current Cosmetic Mods: Matte black tailight bezels Chrome Strut Tower covers RGB grille and engine bay lighting 5k Led Fogs 5k Led DRLs Splitter guard washers from Gen5DIY 1000w Stereo Alpine pdx-f4 Focal PS 165 JL Audio TR 690txi Alpine Mrv-M500 2 x 10" Alpine Typs S __________________ Last edited by SnowyCamaro; 04-24-2016 at 02:08 PM.

01-31-2016, 05:00 PM	#2
SnowyCamaro Drives: 2013 Camaro ZL1, 2006 Chevy Equinox Join Date: Apr 2013 Location: Ontario, Canada Posts: 833	This year has been unbelievably mild for my area. Hence why i was able to drive the car home a week before christmas. Last year i had about 2 ft of snow on the ground. Christmas eve was 11 degrees C. So naturally i was out in a tshirt and polished the car. __________________

01-31-2016, 05:00 PM	#3
SnowyCamaro Drives: 2013 Camaro ZL1, 2006 Chevy Equinox Join Date: Apr 2013 Location: Ontario, Canada Posts: 833	First mod. Switchblade back __________________

01-31-2016, 05:03 PM	#4
SnowyCamaro Drives: 2013 Camaro ZL1, 2006 Chevy Equinox Join Date: Apr 2013 Location: Ontario, Canada Posts: 833	Elite engineering catch can. These are well built products from elite. Thanks to Jared at JDP! __________________

02-21-2016, 10:23 PM	#5
SnowyCamaro Drives: 2013 Camaro ZL1, 2006 Chevy Equinox Join Date: Apr 2013 Location: Ontario, Canada Posts: 833	Got some warm weather today and installed the roto-fab intake and w/w relocate. Draining the full reservoir was a little messy but other than that went without a hitch. I also removed the ground stud and replaced it with a m6x20 bolt so i can remove the filter easily for cleaning. __________________

03-12-2016, 04:14 PM	#6
SnowyCamaro Drives: 2013 Camaro ZL1, 2006 Chevy Equinox Join Date: Apr 2013 Location: Ontario, Canada Posts: 833	Put in the skip shift eliminator. This car is so low its impossible to get up race ramps. Luckily my friend has a lift at home. __________________

03-12-2016, 04:52 PM	#7
justjoshin Drives: 2010 SW 1SS L99 Camaro Join Date: Aug 2011 Location: Louisiana Posts: 2,085 View My Garage	what model Direct Lift is that? __________________

03-13-2016, 07:11 AM	#9
Ryanbabz71 Drives: 2018 Hyper Blue 1SS 1LE Join Date: Jul 2011 Location: Brownsburg, Indiana Posts: 6,234 View My Garage	Nice car Ryan __________________ Ryan * 2018 1SS 1LE Camaro Hyper Blue Metallic Car Build: http://www.camaro6.com/forums/showth...0#post10049680

03-26-2016, 06:13 PM	#10
SnowyCamaro Drives: 2013 Camaro ZL1, 2006 Chevy Equinox Join Date: Apr 2013 Location: Ontario, Canada Posts: 833	3m clear bra - full wrap of bumper and mirrors plus blacked out the side markers and the emblems. Amazing product can barely see it. Car is too dirty to post pics. But this place does some pretty cool rides, had another supercharged camaro on air ride (looked real tacky) getting a full wrap, ferrari, rolls royce and a gtr. The gtr was cool, not my cup of tea but still... __________________

04-18-2016, 08:11 PM	#11
SnowyCamaro Drives: 2013 Camaro ZL1, 2006 Chevy Equinox Join Date: Apr 2013 Location: Ontario, Canada Posts: 833	Installed rgb lighting from diode dynamics. These are okay products. One strip stopped working in about 30 seconds the rest work perfect but a little disappointing. Also installed 5k fogs and 5k drls from gen5diy. __________________

04-18-2016, 08:18 PM	#12
SnowyCamaro Drives: 2013 Camaro ZL1, 2006 Chevy Equinox Join Date: Apr 2013 Location: Ontario, Canada Posts: 833	Now for the stereo build..... Day 1 (Removal of parts) Seat coming out Side panels Rear deck ^i dont know if many other zl1 owners have this but i guess the guy who ordered my car was name tim? I dunno, I'm the second owner. Pretty cool 6x9s out Trunk stripped Passenger door card out Driver door card out All the parts (not bad for 3 hrs work) __________________

04-18-2016, 08:20 PM	#13
SnowyCamaro Drives: 2013 Camaro ZL1, 2006 Chevy Equinox Join Date: Apr 2013 Location: Ontario, Canada Posts: 833	Broke 6 clips...not too bad. I'll have to run to the dealer in the morning. __________________

04-19-2016, 06:12 PM	#14
hctrble BMBLBLU Drives: Aqua Blue Metallic 2010 Camaro 1ss Join Date: Jul 2010 Location: maryland Posts: 311	Keep up the pics on the stereo build. What are the replacements? Steve __________________