My New Hennesey Intake - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

sharbaugh · 09-23-2009, 12:46 PM

Today I personnaly installed the Hennesey Cold Air intake on my Camaro. It was SOOOOOOO easy. The directions were very detailed and the install took 30 minutes. WAY TO GO HENNESEY!!!!!
I took this pic with my phone and it is terrible so when I get my car back I will take better photos.

On another note, a local audio company approached me to use my car in a car show http://www.bradentonmotorsports.com/...ber%202009.htm
They are installing Memphis equipment in my car, I will pick up the car Friday and have it at the show Sat. The best part is an extreme discount on the system when we are done.

Will post pics after it is done.

ffrcobra_65 · 09-23-2009, 12:56 PM

sweet!

Can I ask why you chose Hennesey?

BlaSSt Off · 09-23-2009, 01:08 PM

Quote:

Originally Posted by ffrcobra_65

sweet!

Can I ask why you chose Hennesey?

Cause Hennesey said it was the best one you could get...

The few hp you get with the intake and the weight savings from your wallet mean faster 1/4 mile times!

camarossrs2150 · 09-23-2009, 01:10 PM

Quote:

Originally Posted by BlaSSt Off

Cause Hennesey said it was the best one you could get...

The few hp you get with the intake and the weight savings from your wallet mean faster 1/4 mile times!

do you want to buy a bridge .its the best bridge in the united states

sharbaugh · 09-23-2009, 01:11 PM

I looked at them all as they are listed on the website. I did not see any substantial difference in added HP. The look is why I bought it. Just because it looked better.

camarossrs2150 · 09-23-2009, 01:11 PM

looks good only screwing with ya

ffrcobra_65 · 09-23-2009, 05:42 PM

Quote:

Originally Posted by sharbaugh

I looked at them all as they are listed on the website. I did not see any substantial difference in added HP. The look is why I bought it. Just because it looked better.

and that my friend is all that matters. There's only 1 opinion that counts, yours.

Almost exactly the same reason I bought the Roto-Fab CAI. IMO the R-F CAI looks great and their customer service is Top Notch. I am not hung up on the negligible hp gains.

JJ2010 · 09-23-2009, 05:46 PM

I hope you are happy, but I promise you it is not the best CAI........

Bbrock25 · 09-23-2009, 06:15 PM

Honestly though, whats a few HP 10-15 tops. I would see the point if you wanted a high performance machine and you went down the drag strip weekly. But just for the majority of us car enthusiasts thats not going to play a HUGE roll IMO. Get what you like, and what looks good, your opinion is the only thing that matters!

Sapper1 · 09-23-2009, 06:55 PM

Quote:

Originally Posted by Bbrock25

Honestly though, whats a few HP 10-15 tops. I would see the point if you wanted a high performance machine and you went down the drag strip weekly. But just for the majority of us car enthusiasts thats not going to play a HUGE roll IMO. Get what you like, and what looks good, your opinion is the only thing that matters!

ffrcobra_65 · 09-23-2009, 07:09 PM

Quote:

Originally Posted by JJ2010

I hope you are happy, but I promise you it is not the best CAI........

it is the best to the one that matters.

Mimo · 09-23-2009, 07:27 PM

I've got one too and I love the look!!!

Merc · 09-26-2009, 10:05 AM

I love the look, but my issue with mine is the heat soak of the aluminum tube. I am going to wait to see the results of testing. HP gain is a prime concern as I run My Maro at Street Legals. So needless to say I will probably have a Henessey for sale. LOL

SSRS Steve · 09-26-2009, 10:12 AM

I agree looks nice but heat soak gives IAT a false reading

09-23-2009, 12:46 PM	#1
sharbaugh Tampa Gulf Coast Family Drives: IMB RS SS MANUAL LOADED Join Date: Feb 2009 Location: Ellenton, FL Posts: 262	My New Hennesey Intake Today I personnaly installed the Hennesey Cold Air intake on my Camaro. It was SOOOOOOO easy. The directions were very detailed and the install took 30 minutes. WAY TO GO HENNESEY!!!!! I took this pic with my phone and it is terrible so when I get my car back I will take better photos. On another note, a local audio company approached me to use my car in a car show http://www.bradentonmotorsports.com/...ber%202009.htm They are installing Memphis equipment in my car, I will pick up the car Friday and have it at the show Sat. The best part is an extreme discount on the system when we are done. Will post pics after it is done. Attached Images

09-23-2009, 01:11 PM	#6
camarossrs2150 Drives: abm2ssrs Join Date: Apr 2009 Location: still out of my mind Posts: 2,095	looks good only screwing with ya __________________ [SIGPIC]

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
JDP Motorsports Airaid Intake Specials! PM for Coupon Code!	JDP Motorsports	V8 Bolt-Ons & Tunes	13	12-02-2009 12:44 PM
Stealth Performance--Airaid Cold Air Intake GROUP BUY!!--Great Deal	Torchdvette	V8 Bolt-Ons & Tunes	140	11-01-2009 07:18 PM
Camaro Deal of the Day - 9-21-09 G5CR Intake!	MoranoRacing	V8 Bolt-Ons & Tunes	0	09-21-2009 10:43 AM
HENNESEY INTAKE for V8 and V6	taspec	V6 Bolt-Ons & Tunes	1	09-18-2009 08:34 PM
Hennessey V6 Intake Review	Tecca	Camaro V6 LLT Engine, Exhaust, and Bolt-Ons	23	08-06-2009 06:51 PM

09-23-2009, 12:56 PM	#2
ffrcobra_65 Account Suspended Drives: SuperCharged 2SS/RS IOM MN6 Join Date: May 2009 Location: CA Posts: 5,094	sweet! Can I ask why you chose Hennesey?

09-23-2009, 05:46 PM	#8
JJ2010 Drives: 2010 Camaro SS Join Date: Oct 2008 Location: Smithfield,NC Posts: 1,203	I hope you are happy, but I promise you it is not the best CAI........

09-23-2009, 06:15 PM	#9
Bbrock25 Drives: 2010 1SS/RS Inferno Orange Join Date: Jun 2009 Location: East Ky Posts: 704	Honestly though, whats a few HP 10-15 tops. I would see the point if you wanted a high performance machine and you went down the drag strip weekly. But just for the majority of us car enthusiasts thats not going to play a HUGE roll IMO. Get what you like, and what looks good, your opinion is the only thing that matters!

09-23-2009, 07:27 PM	#12
Mimo Member Drives: '10 2SSRS 09 Silverado - 10 GLK 350 Join Date: Apr 2009 Location: Sudbury Posts: 50	I've got one too and I love the look!!!

09-26-2009, 10:05 AM	#13
Merc In The Circle Drives: 2010 Camaro 2SSRS IOM M6 Join Date: May 2009 Location: Abbotsford BC Canada Posts: 11,310	I love the look, but my issue with mine is the heat soak of the aluminum tube. I am going to wait to see the results of testing. HP gain is a prime concern as I run My Maro at Street Legals. So needless to say I will probably have a Henessey for sale. LOL

09-26-2009, 10:12 AM	#14
SSRS Steve Drives: 2000 Z28 sold Join Date: Aug 2009 Location: Latham,NY Posts: 36	I agree looks nice but heat soak gives IAT a false reading