02-12-2016, 12:46 PM | #1 |
2015 Black Bowtie Inserts
So I'm trying to find some matte black bowtie inserts to replace the gold section of the bowties (front and rear). Currently have the 3M vinyl but its starting to peel off and I am looking for something more permanent and less likely to chip (like paint - which crossed my mind)
Found a few offered but only for 2010-2013 camaros and wondering if there is one for the 2015? Anyone know where to find any? Here is a flat black for 2010-2013 LINK HERE (powdercoated) and then there is a billet gloss black for 2015 LINK HERE I am looking for a matte finish to matche the 1LE hood and wheels but I can't seem to find any flat/matte black inserts like the ones available for the 2010-2013 Camaro.
__________________
|
|
02-12-2016, 12:57 PM | #2 |
EbonyCamaro
|
Lupe at Rivercity creations. For sure
|
02-12-2016, 01:44 PM | #3 |
most people do plasti-dip holds up for at the very least a year
|
|
02-12-2016, 02:04 PM | #4 |
Drives: 2015 Red Rock Camaro Join Date: Dec 2015
Location: El Cajon, CA.
Posts: 59
|
Buddy of mine used flex seal, the rubber in a can. Worked great and held up in the weather.
__________________
The early bird gets the worm, but the second mouse gets the cheese.
|
02-12-2016, 02:18 PM | #5 |
Drives: 2017 Mosaic Bk ZL1 M6 Join Date: Jul 2009
Location: South of Raleigh, NC
Posts: 9,490
|
__________________
|
02-12-2016, 02:44 PM | #6 |
Drives: 2017 2SS, 2023 3LT RS, 2011 2LT RS Join Date: Aug 2014
Location: Memphis
Posts: 362
|
The "pre cut" ones on ebay are not what you'd think. You have to trim them anyways. I told the seller that they weren't cut correctly, he said it was the "3d" effect causing it and you have to trim them to fit.
Save the money and just buy a sheet of black and overlay it yourself. |
02-12-2016, 06:01 PM | #7 |
Drives: 2015 2SS/1LE/RS Join Date: Feb 2016
Location: Sunray, TX
Posts: 7
|
Phastek Performance has some good looking ones
__________________
2015 2SS/1LE/RS, Recaros, Black on black, bone stock (for the moment)
2007.5 GMC Sierra Duramax LML, black, Diamond Eye exhaust, EFI Live tuning, Edge Insight CTS, AFE intercooler tube |
02-12-2016, 07:29 PM | #8 |
Drives: 2014 1SS/1LE Join Date: Nov 2015
Location: Louisville, KY
Posts: 828
|
I did plastidip on the front, seems to be holding up so far.
|
02-12-2016, 09:06 PM | #9 |
Drives: 20’ Chevrolet Camaro 2SS 1LE Join Date: Jan 2009
Location: San Diego
Posts: 1,577
|
I'm planning on buying a set of bow ties painted to match my AGM, then use 3M Carbon fiber wrap on top. By having them painted the bow tie will be smooth out, making it easier to place any vinyl wrap!
__________________
|
02-13-2016, 04:13 PM | #10 |
EbonyCamaro
|
RIVERCITY CREATIONS for the WIN
|
02-14-2016, 12:25 PM | #11 |
Ive bought stuff from them before also...great quality!
__________________
Borla "S"type Cat Back / Hotchkis TVA2 Suspension Kit / Rotofab Intake / Tinted Windows / Headlight Armor Tailight Smoke / P13 DRLs w Harness / De-badged / Satin Black Power Coated Stock Wheels / Gloss Black Calipers / EPCO Custom Knob.
... |
|
02-15-2016, 08:00 PM | #12 |
Drives: 2015 Camaro LS Join Date: Nov 2015
Location: Nv
Posts: 59
|
I plasti-dipped mine and i couldn't be happier.
|
02-16-2016, 03:22 PM | #13 |
Drives: 2014 camaro ss Join Date: Aug 2015
Location: 60106
Posts: 19
|
Sent from my SAMSUNG-SM-N910A using Tapatalk |
02-16-2016, 07:32 PM | #14 |
Drives: 2014 1SS/RS LS3 Join Date: Jul 2012
Location: Wisconsin
Posts: 621
|
I also used plasti-dip and it turned out good. Been on for 2 years now. It is super easy. Just spray the entire bowtie(including the chrome around the outside). Once dry simply peel the plasti-dip off the chrome. It will break at the gap between the gold bowtie and the chrome.
__________________
2014 1SS/RS LS3 AGP TT, Custom TSP Cam, 4L80E Swap 1/4 mile- 9.53 @ 145mph
|
|
|
|
|