02-29-2016, 04:09 PM | #1 |
Vet. USMC Machine Gunner
Drives: 2010 2SS Black with red stripes Join Date: Sep 2013
Location: Ste. Genevieve MO
Posts: 90
|
Dr. ColorChip is amazing
So I couldn't take the chips on my gills any more, or any other chip on the car, and all I have to say is wow, this product is great!
|
02-29-2016, 04:10 PM | #2 |
Vet. USMC Machine Gunner
Drives: 2010 2SS Black with red stripes Join Date: Sep 2013
Location: Ste. Genevieve MO
Posts: 90
|
After
|
02-29-2016, 04:14 PM | #3 |
Gray Eagle
Drives: 2010 Camaro 2SS/RS IBM, 1994 Camaro Join Date: Dec 2009
Location: Sierra Vista, AZ
Posts: 331
|
Looks good, I have the same problem, I will have to give it a try. I'm not a paint guy so doing new thing like this is a big step...afraid I might mess it up worse.
__________________
Ordered - 14 Aug 2009 Born - 4 Nov 2009 Delivered - 17 Dec 2009 |
02-29-2016, 04:19 PM | #4 |
Drives: early 2011 Camaro convertible Join Date: Jul 2014
Location: House Springs, Mo
Posts: 2,002
|
I love it.
just wipe surface clean with alcohol, wipe paint on, let dry 5min and then polish off with provided solvent. Very professional look. I have used it on my SSR and Camaro convertible.
__________________
Early 2011 LT Convertible, ZL1 bumper, hood, side skirts, belly pan and wheels, Truecarbon ECF hood extractor, K&N CAI, Elite catch can, Big Worm Bow Tie emblems, Jacfab bracket, Vitesse TC, BMR strut brace, BMR tunnel brace, NPP exhaust |
02-29-2016, 04:45 PM | #5 | |
Vet. USMC Machine Gunner
Drives: 2010 2SS Black with red stripes Join Date: Sep 2013
Location: Ste. Genevieve MO
Posts: 90
|
Quote:
There's no way you can mess this up unless you let the paint dry for like a day without wiping the excess off. You just squeegee the paint over chips, or in my case I just drug it all the way down the gills because there is so many chips, let dry for about 3 minutes then wipe the excess off with the solvent they give you, just be careful not to push down hard on the chip or else it will pull the paint out you just filled it with. |
|
02-29-2016, 06:13 PM | #6 |
Drives: Black 2011 Camaro 2LS Join Date: Nov 2011
Location: Los Angeles
Posts: 249
|
I am soooo buying this for both my cars. Thanks for the suggestion!
|
02-29-2016, 06:23 PM | #7 |
I used this on my front bumper and gills then immediately put clear bra over it. No more problems and you can't see the chips anymore.
|
|
02-29-2016, 06:26 PM | #8 |
El Duderino
|
Very nice! Thanks for sharing.
__________________
I bowl. Drive around. The occasional acid flashback.
|
03-01-2016, 10:05 AM | #9 |
雪の玉
Drives: '22 Z71 RST Silverado Join Date: Feb 2011
Location: South
Posts: 3,415
|
Yeah, thanks for sharing....nice
|
03-01-2016, 10:19 AM | #10 |
Drives: 2014 2SS/RS - SIM Join Date: Apr 2014
Location: Arizona
Posts: 2,188
|
Where do you get it, have a link?
|
03-01-2016, 10:24 AM | #11 |
Drives: 2014 Summit White 2SS/RS M6 Join Date: Aug 2012
Location: @ ur moms house in VA
Posts: 1,405
|
__________________
|
03-01-2016, 12:18 PM | #12 |
GEN5 Detail
Drives: 2011 Synergy Series 2SS Convertible Join Date: Sep 2014
Location: Northeast, OH
Posts: 1,986
|
This should be a must for all black cars.
__________________
Roto-Fab CAI, Borla ATAK Exhaust System, Stainless Power Headers, RX Performance Catch Can, ACS T4 Splitter, Oracle side markers, Dyno Tuned by RDP Motorsports
|
03-01-2016, 01:22 PM | #13 | |
Drives: 2014 2SS/RS - SIM Join Date: Apr 2014
Location: Arizona
Posts: 2,188
|
Quote:
|
|
03-01-2016, 01:34 PM | #14 |
Drives: 2015 Camaro SS 1LE Join Date: Aug 2014
Location: Chattanooga, TN
Posts: 286
|
I've used it myself, it does work wonders!
__________________
2013 2SS RS
CAI Intake Air Scope BMR Strut Bar Tune |
|
|
|
|