![]() |
![]() |
#1 |
![]() Drives: 16 Z06 Join Date: Apr 2014
Location: Elmira, New York
Posts: 119
|
Clip for a-pillar
Broke the clip on my a-pillar......does anyone happen to know a part number or have one to sell? Thanks!
|
![]() |
![]() |
![]() |
#2 |
![]() ![]() Drives: 2023 SS 1LE 10SPD/2015 SS 427 Man Join Date: Aug 2015
Location: Sacramento Area
Posts: 803
|
Picture?
|
![]() |
![]() |
![]() |
#3 |
![]() Drives: 16 Z06 Join Date: Apr 2014
Location: Elmira, New York
Posts: 119
|
I don't have it since it snapped and can't even find a picture online :/ it had a tip like a Xmas tree and the came down into a base that was about an inch long...it pushed up into a plastic piece that clipped to the a pillar and pushed up into a hole where it clipped
|
![]() |
![]() |
![]() |
#4 |
![]() ![]() ![]() Drives: 2013 Camaro 2SS/RS M6 Join Date: Feb 2013
Location: So Cal
Posts: 1,048
|
are you talking about this clip?
![]() and did it go in this assembly? If so, you have to buy as assembly, part#: 11611451.. Contact Maureen on here and she can get you set up. ![]()
__________________
2013 Black / Black Camaro 2SS/RS M6 w/Magnuson TVS2300, ZL1 Fuelpump / ADM FPCM, NPP Exhaust, Cold Air Inductions CAI w/ Scoop, Elite Engineering Catch Can, VMAX Ported TB, OEM 1LE Front Splitter, AAC Ghosted Side Markers, Dropped on BMR Split Drop Springs Build#24869 |
![]() |
![]() |
![]() |
#5 |
![]() Drives: 16 Z06 Join Date: Apr 2014
Location: Elmira, New York
Posts: 119
|
That's exactly it! Thank you so much!
|
![]() |
![]() |
![]() |
#6 |
![]() Drives: 16 Z06 Join Date: Apr 2014
Location: Elmira, New York
Posts: 119
|
Does just the plastic clip part come out or the whole spring?
|
![]() |
![]() |
![]() |
#7 |
![]() ![]() ![]() Drives: 2013 Camaro 2SS/RS M6 Join Date: Feb 2013
Location: So Cal
Posts: 1,048
|
I replaced the whole thing, if i remember correctly you have to remove the metal "receiving" part on the pillar in order to remove the whole assembly.
__________________
2013 Black / Black Camaro 2SS/RS M6 w/Magnuson TVS2300, ZL1 Fuelpump / ADM FPCM, NPP Exhaust, Cold Air Inductions CAI w/ Scoop, Elite Engineering Catch Can, VMAX Ported TB, OEM 1LE Front Splitter, AAC Ghosted Side Markers, Dropped on BMR Split Drop Springs Build#24869 |
![]() |
![]() |
![]() |
#8 |
![]() Drives: 16 Z06 Join Date: Apr 2014
Location: Elmira, New York
Posts: 119
|
I appreciate the advice! Thank you
|
![]() |
![]() |
|
|
![]() |
|
|