New 3 piece wheels finished and going on this week - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Indpowr · 09-29-2009, 06:36 PM

Very excited that we are going with these wheels. It does not look over done bling wise and/or lip. Rear lip is at 3.5 inches with a touch of chrome.

Vossen Forged 22x9 and 22x10.5

I will take some photos when mounted.

themossman · 09-29-2009, 07:23 PM

Yum.

I'm still trying to figure out what I want...

I'm not on a beer budget...but I'm not on a custom budget either...

Indpowr · 09-29-2009, 07:32 PM

Quote:

Originally Posted by themossman

Yum.

I'm still trying to figure out what I want...

I'm not on a beer budget...but I'm not on a custom budget either...

These retail for 5580 plus tires and sensors. I do sell them for a little more reasonable. Maybe a mixed drink budget depending on what bar

225WhiteSS · 09-29-2009, 07:53 PM

Cant wait to see it! Alrdy looking good.

Number 3 · 09-29-2009, 08:02 PM

Really looking forward to seeing them on the car.

Those may be the sharpest wheels I've seen so far. I like them A LOT!!!!

22s are a bit big for my taste, but I'll bet these will look good.

1BadaSS · 09-29-2009, 08:15 PM

Those are nice! Finish it off with a nice BBK setup and it will look bad ass! Otherwise, 5 spoke wheels make the stock brakes look tiny.

zebra · 09-29-2009, 08:18 PM

mmmmmm nice!
can't wait to see them on the car

shevyman · 09-29-2009, 08:25 PM

Quote:

Originally Posted by Indpowr

Very excited that we are going with these wheels. It does not look over done bling wise and/or lip. Rear lip is at 3.5 inches with a touch of chrome.

Vossen Forged 22x9 and 22x10.5

I will take some photos when mounted.

looks good. i just got another sponsor for wheels. first one was with capitol forged and now uswheel sponsored me. so i chose a design i think is almost identical to yours. now as far as my project i know there will be many other cmaaros with wide bodys but i think there will be two thing on my car that will be diff and knowbody else will have. would love to say but will ruin the surprise to many people waiting for my project to be finished.

Kilo-9 · 09-29-2009, 09:12 PM

Sweet looking wheels...I can't wait to see them on the car.

Indpowr · 09-29-2009, 09:22 PM

Thanks for all the compliments. Had a lot to choose from and the concave did not give the lip that I accustom to seeing

Andro · 09-29-2009, 11:10 PM

Can't wait to see them mounted

themossman · 09-30-2009, 12:00 AM

Let's see some pics when you get them on...and pm me some pricing.

COR Forged · 09-30-2009, 09:38 AM

Nice selection John. Post some pics when you get them on the car!

Indpowr · 09-30-2009, 12:53 PM

Quote:

Originally Posted by COR Forged

Nice selection John. Post some pics when you get them on the car!

Thanks Gio, still pushing your rims as well...

09-29-2009, 06:36 PM	#1
Indpowr Account Suspended Drives: Corvette C6 Join Date: May 2008 Location: Florida Posts: 6,959 View My Garage	New 3 piece wheels finished and going on this week Very excited that we are going with these wheels. It does not look over done bling wise and/or lip. Rear lip is at 3.5 inches with a touch of chrome. Vossen Forged 22x9 and 22x10.5 I will take some photos when mounted.

09-29-2009, 07:23 PM	#2
themossman Apprehensive Optimist Drives: '10 SS/RS SIM Join Date: Sep 2008 Location: JAX Posts: 1,383	Yum. I'm still trying to figure out what I want... I'm not on a beer budget...but I'm not on a custom budget either... __________________ Car is for sale --->http://www.camaro5.com/forums/showthread.php?t=158486 Current Summary: Engine:Phase One-(All work by Vengeance Racing): Custom Cam, AR Headers, ported throttle body, ported intake, custom tune, dual valve springs, hardened push rods, under drive pulley, thermostat, Vararam CAI, C5R timing chain, Melling oil pump catch can, breather, MagnaFlow Sport Axle Back Suspension: Pfadt Sport Sway Bars, Pfadt drop springs Other: MGW Shifter, Custom Paint my build journal ---->http://camaro5.com/forums/showthread.php?t=30057

09-29-2009, 08:02 PM	#5
Number 3 Hail to the King baby! Drives: '19 XT4 2.0T & '22 VW Atlas 2.0T Join Date: Dec 2008 Location: Illinois Posts: 12,172 View My Garage	Really looking forward to seeing them on the car. Those may be the sharpest wheels I've seen so far. I like them A LOT!!!! 22s are a bit big for my taste, but I'll bet these will look good. __________________ "Speed, it seems to me, provides the one genuinely modern pleasure." - Aldous Huxley

09-29-2009, 08:15 PM	#6
1BadaSS Drives: 2010 CGM 2SS 6spd Join Date: Apr 2009 Location: Houston Posts: 327	Those are nice! Finish it off with a nice BBK setup and it will look bad ass! Otherwise, 5 spoke wheels make the stock brakes look tiny. __________________ 2010 CGM 2SS/6MT-Kooks LT headers w/cats, MBRP Exhaust, D1-SC Procharger, FAST 65lb Injectors, NGK TR-6 plugs, 160* T-stat, ADM Boost Gauge,ChuckTuned= 530rwhp/500rwtq

09-29-2009, 08:18 PM	#7
zebra just can't seem to leave Drives: your mom wild!! Join Date: Oct 2008 Location: cold & windy Posts: 10,625 View My Garage	mmmmmm nice! can't wait to see them on the car __________________ Eve ('00 FRC): hot-air intake Rowan ('09 H3): 5spd mom-mobile Penny ('99 Sierra): 5.3 / HD 5spd... gone but not forgotten Samson ('18 HD): compounded 408

09-29-2009, 07:53 PM	#4
225WhiteSS Drives: Waiting Join Date: Jun 2009 Location: 225 Posts: 105	Cant wait to see it! Alrdy looking good.

09-29-2009, 09:12 PM	#9
Kilo-9 Dog Is My Copilot Drives: 2011 2SS/RS LS3 Join Date: Jun 2009 Location: Pittsburgh, PA Posts: 1,394	Sweet looking wheels...I can't wait to see them on the car. __________________

09-29-2009, 09:22 PM	#10
Indpowr Account Suspended Drives: Corvette C6 Join Date: May 2008 Location: Florida Posts: 6,959 View My Garage	Thanks for all the compliments. Had a lot to choose from and the concave did not give the lip that I accustom to seeing Last edited by Indpowr; 09-29-2009 at 11:49 PM.

09-29-2009, 11:10 PM	#11
Andro NOICE!!! ™ Drives: Force Fed 427 Join Date: Jan 2009 Location: GOT BOOST? Posts: 5,214 View My Garage	Can't wait to see them mounted __________________

09-30-2009, 12:00 AM	#12
themossman Apprehensive Optimist Drives: '10 SS/RS SIM Join Date: Sep 2008 Location: JAX Posts: 1,383	Let's see some pics when you get them on...and pm me some pricing. __________________ Car is for sale --->http://www.camaro5.com/forums/showthread.php?t=158486 Current Summary: Engine:Phase One-(All work by Vengeance Racing): Custom Cam, AR Headers, ported throttle body, ported intake, custom tune, dual valve springs, hardened push rods, under drive pulley, thermostat, Vararam CAI, C5R timing chain, Melling oil pump catch can, breather, MagnaFlow Sport Axle Back Suspension: Pfadt Sport Sway Bars, Pfadt drop springs Other: MGW Shifter, Custom Paint my build journal ---->http://camaro5.com/forums/showthread.php?t=30057

09-30-2009, 09:38 AM	#13
COR Forged Drives: SS Join Date: Jun 2009 Location: Miami, FL Posts: 383	Nice selection John. Post some pics when you get them on the car!