04-27-2016, 08:46 AM | #1 |
Drives: 2010 ss inferno orange camaro Join Date: Feb 2016
Location: Upstate New York
Posts: 110
|
Craftsman 2-1/2 Ton Floor Jack, Low Profile$39.99
Found this on line. Good Deal??http://www.sears.com/craftsman-2-1-2...9&AID=11042411
|
04-27-2016, 11:56 AM | #2 |
Drives: Race Car Join Date: Sep 2009
Location: Seffner, FL
Posts: 6,226
|
Every Craftsman Jack I have owned lasted until 2 weeks after it went out of warranty!
|
04-27-2016, 08:13 PM | #3 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,071
|
You get what you pay for!!!
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
04-28-2016, 09:57 AM | #4 |
Lifestyle = Deathstyle
|
I would highly recommend this:
And you can carry it
__________________
11 2SS/RS
|
04-28-2016, 10:59 AM | #5 |
Drives: Race Car Join Date: Sep 2009
Location: Seffner, FL
Posts: 6,226
|
I agree on the HF! That's what I use now.
|
04-28-2016, 09:17 PM | #6 |
Drives: 2010 1ss Join Date: Mar 2016
Location: Colorado Springs co
Posts: 174
|
Ive had amazing luck with harbor freight jacks as well. Used the same one for about 10 years and have never even needed too put oil in it.
|
04-28-2016, 10:17 PM | #7 |
Lets roll...
Drives: 14' Join Date: Jun 2014
Location: TX/S.FL
Posts: 1,496
|
Definitely would not use this one again... I had it and it lasted about 2 lifts on my camaro, before it started spilling its guts out and reseambling the tower of pisa.
Good thing that Harbor Freight tools does stand behind their products, hence why upgraded to the 3 ton super low profile steel jack. Thing is a monster, has been a great jack for the money.
__________________
|
04-29-2016, 11:14 AM | #8 | |
Drives: Race Car Join Date: Sep 2009
Location: Seffner, FL
Posts: 6,226
|
Quote:
|
|
04-29-2016, 11:36 AM | #9 |
Drives: camaro Join Date: Aug 2015
Location: Houston
Posts: 149
|
I use the same jack. it's been flawless.
__________________
1969 pro street
heads/cam/blown/meth 408 LS |
04-29-2016, 08:15 PM | #10 |
Drives: 2011 1SS/RS IBM Camaro Join Date: Jan 2011
Location: Chittenango, NY, USA
Posts: 7,219
|
spike III Build IBM 1SS/RS [COTW] 6/25/12
My car is dropped 1" and I have no problem getting this jack under my car. It is an awesome jack.
__________________
|
04-30-2016, 09:53 AM | #11 |
I've got the 2.5 ton HF and it does the job. No complaints
__________________
|
|
05-06-2016, 11:52 AM | #12 |
Drives: 2012 2SS/RS M6 Join Date: Jul 2011
Location: Metro Detroit
Posts: 696
|
I am honestly floored (no pun intended) that these HF jacks are holding up. Will keep in mind for the future!
|
05-11-2016, 04:31 PM | #13 | |
Drives: '15 Camaro 2LS V6 Join Date: May 2016
Location: Oklahoma
Posts: 76
|
Quote:
Sometimes you get good and others you get squawdoosh! I have had bad luck with the jacks at HF. However I have had good luck with their grinders and cut off tools. HF will stand behind everything they sell though, and that in itself might be worth a looky lou |
|
|
|
|
|