You are browsing camaro5 
 |
|
05-02-2016, 11:13 AM
|
#1 |
 Drives: 2013 zl1, and 2014 silverado 1500 Join Date: Jun 2013
Location: fishkill,ny
Posts: 38
|
exhaust and headers
what is the bet exhaust and headers for the zl1
|
|
|
|
05-02-2016, 11:56 AM
|
#2 |
 Drives: 2014 Camaro ZL1 Join Date: Jun 2014
Location: Morgantown, WV
Posts: 63
|
|
|
|
|
|
05-02-2016, 12:30 PM
|
#3 |
 
Drives: 2014 ZL1- Summit White M6 Join Date: Aug 2014
Location: Thornton, Colorado
Posts: 462
|
Any 2" Headers and stock exhaust sounds great, is cheaper, and I've seen good to 700+whp
__________________
750whp @ 13psi Garage Built on Jack Stands.. 850++ 100 shot of sauce
 |
|
|
|
|
05-02-2016, 01:13 PM
|
#4 |
|
Z-BEAST
Drives: 2013 JDP ZL-850 Track Spec ZL1, Join Date: Mar 2013
Location: Oregon City, OR
Posts: 1,471
|
I run stock exhaust and Kook 1-7/8" headers. If you plan on going over 750 whp then you may want to go 2".
|
|
|
|
|
05-02-2016, 05:39 PM
|
#5 |
|
Drives: 2013 zl1, and 2014 silverado 1500 Join Date: Jun 2013
Location: fishkill,ny
Posts: 38
|
exhaust I`m thinking about corsa cause i wanna keep the quad tips. i would like to find someon with the corsa around me so i can hear it in person
|
|
|
|
|
05-02-2016, 06:14 PM
|
#6 |
|
KaBoom1701
Drives: 13' ZL1 Red M6 Join Date: Dec 2012
Location: I.E. SoCal (Yucaipa)
Posts: 8,631
|
Buy the best you can afford.....
Like they said above..+700rwhp just go with 2" to save time and money down the road.
__________________
Mods:
Roto-Fab Intake, WW Res. kit & Big Gulp Air Scoop, Elite Catch Can, ATI Super Damper & 18% OD Pulley, LF Idler pulley bracket, Metco CC breather, ID850 Injectors, Stainless Power Headers w/ ceramic coating, TR71X Spark Plugs, JMS Fuel Pump Booster, Bo White TB, Tuned by Ted @ Jannetty Racing, Ron Davis HX, D3 Reservoir, Pfadt 1" Springs, Moreno Camber Plates, ZL1 Addons Splitter guard washers, Tow Hook kit & rock guards, Hurst Shifter Billet Plus 6 Speed Short Shifter, ZL1 DRL lighting harness, ZL1 Recaro Seats. |
|
|
|
|
05-03-2016, 07:08 AM
|
#7 |
Drives: 2013 AGM ZL1 BELLA* Join Date: Jan 2011
Location: VA
Posts: 370
|
I'm using 2" dynatechs from Jannety and making 760hp to the tires. I didn't see the point of over paying for headers when they will all yield pretty much the same numbers in comparison. Had them coated as well and saved ALOT of money for other mods.
__________________
Roto Fab CAI, Roto Fab Big Gulp, Jokerz ported SC/Snout, LS7 TB ported, ATI Balancer, 28%(10") Lower Pulley, 2" Headers, No Cats,Forza 3way, E85 Flex Fuel sensor , ID850 injectors,, BTR Stage 3, Ron Davis HX, Mighty Mouse CC, APR Splitter, Aero Sports Concepts Splitter Kit, Showstoppers CarbonFiber wicker bill, MRR Wheels. 720rwhp/690tq on 93, 762rwhp E85.
2013 AGM ZL1 Bella* 2010 MGM Toyota Tacoma 2010 CGM SS (Traded) 1996 Black SS (Sold) |
|
|
|
|
|
|
|
 |
|
|
