Stainless Power Headers, yay or nay? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

havelegs · 05-18-2016, 11:08 AM

Getting ready to purchase, your thoughts?

kc ss/rs · 05-18-2016, 11:15 AM

Have had good luck with mine

JDP Sales · 05-18-2016, 11:18 AM

I ran them on my 14 1LE. Made great power and the fit and finish was great. For the money, these are excellent headers. Want some ;-)? I can help. Get ahold of me.

All the best,

Jared Royce
801.545.4215

bionick · 05-18-2016, 11:47 AM

For the price you can't beat it. These are great quality and spending 1200 or more on headers is just idiotic in my opinion..

14AGMSS · 05-18-2016, 11:49 AM

I have them. Great value for the money.

jsm00z28ss · 05-18-2016, 11:59 AM

I waited a long time before I pulled the trigger on mine so glad I got these fitment was great. I also have the high flow cats which also worked out well and for the price I can not complain.

PalmerGA · 05-18-2016, 12:15 PM

I just bought some SP long tubes w/ high-flow cats plus a SCT X4 custom tune, though I haven't installed them yet - within the next week I hope. I was a little hesitant until I spoke with the vendor's technician, who assured me they have experienced zero problems with these "less than top of the line" headers. That, and the many satisfied customers on C5, removed all doubt and made me pull the trigger on the Stainless Power setup. Can't wait to install them and load the tune.

MarylandSpeed · 05-18-2016, 12:33 PM

They are good headers, and we have had success with them. That said, after the last price increase, they are in the neighborhood of many of the US made brands.

Homeless Man · 05-18-2016, 12:37 PM

I have them and installed myself no problems. They're not ceramic coated though so they won't stay nice and shiny.

havelegs · 05-18-2016, 03:57 PM

Cool thanks guys. Will buy soon.

0331Marine · 05-18-2016, 04:09 PM

Got mine off Ebay for less than $1k shipped.

Fanch1LE · 05-18-2016, 04:28 PM

Have you considered Speed Engineering headers? I took a chance on them and couldn't be happier. Installed myself and the fit was perfect. I haven't seen a single bad review from anyone who actually owns them. Check out their website.

G701LE · 05-18-2016, 05:51 PM

Quote:

Originally Posted by bionick

For the price you can't beat it. These are great quality and spending 1200 or more on headers is just idiotic in my opinion..

This^^^ I have had my Stainless Works LT's on for a few months and love them!

havelegs · 05-18-2016, 06:41 PM

Quote:

Originally Posted by Fanch1LE

Have you considered Speed Engineering headers? I took a chance on them and couldn't be happier. Installed myself and the fit was perfect. I haven't seen a single bad review from anyone who actually owns them. Check out their website.

Yeah but getting a good package deal with the headers with cats and a tunna (tuner).

05-18-2016, 11:08 AM	#1
havelegs Drives: '23 LT1 A10 Join Date: Oct 2015 Location: Austin Texas Posts: 1,042	Stainless Power Headers, yay or nay? Getting ready to purchase, your thoughts?

05-18-2016, 11:15 AM	#2
kc ss/rs Drives: 2010 ss/rs Join Date: Jun 2013 Location: kansas city missouri Posts: 247	Have had good luck with mine __________________ rotofab cai ported throttle body sp headers with cats loud mouth axle back no mufflers tuned by steve williams 6l80etuning.com bmr split springs cam motion custom camshaft btr 660 spring kit maggie 2300 id850 injectors livernois fuel pump

05-18-2016, 11:47 AM	#4
bionick Drives: 2010 2SS/RS M6 Join Date: Oct 2013 Location: Gilbert, AZ Posts: 931 View My Garage	For the price you can't beat it. These are great quality and spending 1200 or more on headers is just idiotic in my opinion.. __________________ 2010 Camaro 2SS/RS \| 416 LS3 \| FED stage 2 heads

05-18-2016, 12:15 PM	#7
PalmerGA Drives: 2013 SIM 1SS/RS L99 Join Date: May 2012 Location: Southwest GA Posts: 8,754 View My Garage	I just bought some SP long tubes w/ high-flow cats plus a SCT X4 custom tune, though I haven't installed them yet - within the next week I hope. I was a little hesitant until I spoke with the vendor's technician, who assured me they have experienced zero problems with these "less than top of the line" headers. That, and the many satisfied customers on C5, removed all doubt and made me pull the trigger on the Stainless Power setup. Can't wait to install them and load the tune. __________________ 2013 1SS/RS Coupe L99, Stainless Power Works LT Headers, SCT X4 Custom Tune from RDP, CAI Inc. Air Intake w/ Apex Scoop, VMAX CNC Ported Throttle Body, Solo Axle-Back Exhaust w/ J-pipes, Apex Catch Can, Husky Splash Guards, Heritage Grille, 3D Carbon Rear Spoiler, Oracle Chrome Turn Signal Bulbs, GM Reverse Light Trim Billets, Gorilla Black Locking Lugs, Emblem Pros Retro SS Badges/Custom Retro SS Kickplates/Under-hood Bowtie, 35% window Tint, Nitto Motivo Tires (6-8-18)

05-18-2016, 12:37 PM	#9
Homeless Man Homeless Life Chose Me Drives: LS3 (sold 4/21) Join Date: Nov 2014 Location: Streets of Philly Posts: 3,648	I have them and installed myself no problems. They're not ceramic coated though so they won't stay nice and shiny. __________________ Pity a man in familiar places, who yet feels like a stranger.

05-18-2016, 11:18 AM	#3
JDP Sales Drives: Chevys at the limit Join Date: Nov 2010 Location: SLC, UT Posts: 9,621	I ran them on my 14 1LE. Made great power and the fit and finish was great. For the money, these are excellent headers. Want some ;-)? I can help. Get ahold of me. All the best, Jared Royce 801.545.4215

05-18-2016, 11:49 AM	#5
14AGMSS Drives: 2014 AGM 2SS/L99 Join Date: Jun 2014 Location: Richmond VA Posts: 84	I have them. Great value for the money.

05-18-2016, 11:59 AM	#6
jsm00z28ss Drives: 2012 Camaro 2SS Join Date: Jan 2007 Location: linden NJ Posts: 46	I waited a long time before I pulled the trigger on mine so glad I got these fitment was great. I also have the high flow cats which also worked out well and for the price I can not complain.

05-18-2016, 12:33 PM	#8
MarylandSpeed Account Suspended Drives: 2012 ZL1 & 2010 2SS/RS Join Date: Jul 2009 Location: Maryland Posts: 3,378	They are good headers, and we have had success with them. That said, after the last price increase, they are in the neighborhood of many of the US made brands.

05-18-2016, 03:57 PM	#10
havelegs Drives: '23 LT1 A10 Join Date: Oct 2015 Location: Austin Texas Posts: 1,042	Cool thanks guys. Will buy soon. __________________ 24 LT1 M6 Sharkskin Metallic 14 Mazda Mazda3 S Grand Touring (Daily)

05-18-2016, 04:09 PM	#11
0331Marine Drives: 2012 SS/RS MN6 Join Date: Mar 2016 Location: Covington Ga Posts: 783	Got mine off Ebay for less than $1k shipped.

05-18-2016, 04:28 PM	#12
Fanch1LE Drives: 2015 1SS 1LE Join Date: Sep 2015 Location: Texas Posts: 163	Have you considered Speed Engineering headers? I took a chance on them and couldn't be happier. Installed myself and the fit was perfect. I haven't seen a single bad review from anyone who actually owns them. Check out their website.