![]() |
![]() |
#1 |
![]() Drives: 2022 Wild Cherry SS Join Date: Aug 2012
Location: Germantown, Md
Posts: 316
|
2016 Wheels
Can anyone tell me if wheels off a 2016 1SS will fit my 2015 2SS?
Thanks in advance. |
![]() |
![]() |
![]() |
#2 |
![]() Drives: 2015 Camaro SS Join Date: Mar 2016
Location: South Florida
Posts: 41
|
|
![]() |
![]() |
![]() |
#3 |
![]() Drives: 2013 Camaro 1LS Join Date: Sep 2013
Location: Hicksville, NY
Posts: 102
|
|
![]() |
![]() |
![]() |
#4 |
![]() Drives: 2015 Camaro SS Join Date: Mar 2016
Location: South Florida
Posts: 41
|
|
![]() |
![]() |
![]() |
#5 |
![]() Drives: 2012 Camaro 2SS/RS M6 Join Date: Feb 2016
Location: Saugerties, NY
Posts: 125
|
Yes
I used 3mm spacers without them the wheels just touched the caliper
Last edited by Alex Murphy; 05-31-2016 at 02:13 PM. |
![]() |
![]() |
![]() |
#6 |
![]() Drives: 2017 2LT/RS & 2013 2LT/RS vert Join Date: May 2014
Location: Georgia
Posts: 383
|
Any idea if the 16 center caps fit 10-15?
|
![]() |
![]() |
![]() |
#7 |
![]() Drives: 2017 2LT/RS & 2013 2LT/RS vert Join Date: May 2014
Location: Georgia
Posts: 383
|
Anyone?
|
![]() |
![]() |
![]() |
#8 |
![]() Drives: 15 BVM 2SS/RS 1LE NPP Join Date: Aug 2014
Location: Central Ohio
Posts: 6
|
No good, the 16's are larger
|
![]() |
![]() |
![]() |
#9 |
![]() Drives: 2017 2LT/RS & 2013 2LT/RS vert Join Date: May 2014
Location: Georgia
Posts: 383
|
|
![]() |
![]() |
![]() |
#10 | |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
Quote:
![]() The stud length on 5th gens is 28mm, the stud size is 14mm x 1.50. The industry std calc to determine the required stud length to tighten a 5th gen lug is (14mm x 1.5 ) = 21mm of stud length. 100% of the torque is achieved at the 6th turn, the extra turns don't add anymore tighting/torquing.I was able to get almost 7 turns with a 3mm spacer that I used. Less than 6 turns and your lugs are not fully secured ![]() Last edited by camguynj; 08-16-2016 at 09:59 PM. |
|
![]() |
![]() |
|
|
![]() |
|
|