LED Lights Replacement all around (Interior + Exterior) - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

pinoyplaya · 05-27-2016, 12:07 AM

I am trying to replace all of my bulbs to LED white lights and looking for recommendations/part numbers for the ones listed below:

- Dome Lights
- Rear Parking/Reflector Lights?
- License Plate Lights

What else can I change to white LEDs besides whats on the headlights and tail lights?

Thanks!

William.23 · 05-27-2016, 07:20 AM

Dome Lights -
AAC or DIODE (Both have options for Cool White LED's)

Rear Parking (Reverse?) Go with AAC Reverse Lights

License Plate Lights -
Again AAC or Diode (Both Have Options for Cool White)

Now as far as the part #'s go (This is bulb fitment) :

Dome Light : 194, Or known as T10..

Reverse Lights : 194, Or T10..
(*I'll throw in this in case you meant this -Rear Tail Light(s) [4] : 3157, ...)

License Plate Lights : 194, Or T10..

*Now as far as adding more WHITE*
Headlights overall? Or do you just mean the projector - if that's the case

Go with Switchback LED's (Front Turn Signals) they look great (;. Basically - They are on WHITE - but shine AMBER when you use your turn signal - then go back to WHITE. Hence the name "Switchback". Bulb Fitment is Part 3157. *In this case you're going to need resistors so you don't have hyperblinking* I can send you a video or picture of how I have mine installed.

Moving on -
More WHITE - Add Footwell Lighting (: I haven't done this, but I should...Anyways :

http://www.diodedynamics.com/store/l...otwell-led-kit

*Another addition is change out your fog lights, to Plasma LED (Just choose WHITE).

****ALL THINGS CONSIDERED**** You have an RS, make sure if the option is available for RS - get it. So Fog Lights for you in this case are P13W.

Hope this helps (; .

pinoyplaya · 05-28-2016, 12:27 AM

Thanks William.

Do you know which bulbs I need to replace the ones below? (circled in red)

Dizzy82 · 05-28-2016, 11:20 AM

Quote:

Originally Posted by William.23

Rear Parking (Reverse?) Go with AAC Reverse Lights

This. LED replacement bulbs will not give enough light output to safely see.

bigwormgraphix · 05-31-2016, 08:38 AM

Side Markers are an easy swap, uses the same bulb type as the map light, trunk and license plate lights.

05-27-2016, 12:07 AM	#1
pinoyplaya Drives: '13 SS RS Join Date: Dec 2012 Location: Huntington Beach, CA Posts: 182	LED Lights Replacement all around (Interior + Exterior) I am trying to replace all of my bulbs to LED white lights and looking for recommendations/part numbers for the ones listed below: - Dome Lights - Rear Parking/Reflector Lights? - License Plate Lights What else can I change to white LEDs besides whats on the headlights and tail lights? Thanks! __________________ 2013 Camaro SS RS

05-28-2016, 12:27 AM	#3
pinoyplaya Drives: '13 SS RS Join Date: Dec 2012 Location: Huntington Beach, CA Posts: 182	Thanks William. Do you know which bulbs I need to replace the ones below? (circled in red) __________________ 2013 Camaro SS RS

05-27-2016, 07:20 AM	#2
William.23 Drives: 2011 Summit White. Join Date: Mar 2011 Location: SO-California Posts: 525 View My Garage	Dome Lights - AAC or DIODE (Both have options for Cool White LED's) Rear Parking (Reverse?) Go with AAC Reverse Lights License Plate Lights - Again AAC or Diode (Both Have Options for Cool White) Now as far as the part #'s go (This is bulb fitment) : Dome Light : 194, Or known as T10.. Reverse Lights : 194, Or T10.. (I'll throw in this in case you meant this -Rear Tail Light(s) [4] : 3157, ...) License Plate Lights : 194, Or T10.. Now as far as adding more WHITE* Headlights overall? Or do you just mean the projector - if that's the case Go with Switchback LED's (Front Turn Signals) they look great (;. Basically - They are on WHITE - but shine AMBER when you use your turn signal - then go back to WHITE. Hence the name "Switchback". Bulb Fitment is Part 3157. In this case you're going to need resistors so you don't have hyperblinking I can send you a video or picture of how I have mine installed. Moving on - More WHITE - Add Footwell Lighting (: I haven't done this, but I should...Anyways : http://www.diodedynamics.com/store/l...otwell-led-kit Another addition is change out your fog lights, to Plasma LED (Just choose WHITE). *ALL THINGS CONSIDERED** You have an RS, make sure if the option is available for RS - get it. So Fog Lights for you in this case are P13W. Hope this helps (; .

05-31-2016, 08:38 AM	#5
bigwormgraphix Account Suspended Drives: 1991 Z28, 2015 SS & 2017 SS Join Date: Aug 2009 Location: Fort Worth, Tx Posts: 800	Side Markers are an easy swap, uses the same bulb type as the map light, trunk and license plate lights.