05-28-2016, 03:51 PM | #1 |
Drives: 2015 1LE Join Date: Dec 2015
Location: Windermere, Florida
Posts: 36
|
1lE/ZL1 wheels lost gloss shine effect
Hey guys,
So on this weeks wash I noticed one of my black wheels has lost its gloss shiny effect, it has gone a dull Matt black and sticks out like a sore thumb compared to the other wheels. Does anyone have any insight? The car is 2015 1LE. Thank you. |
05-28-2016, 03:54 PM | #2 |
Tri-County Camaro SWFL
|
pictures would help a lot
Try re-washing the wheel to see if that helps. When I washed my rims with soap and water the brake dust would just smear and make it look like the wheel lost its gloss. If that doesn't help, try on one spoke and see if that makes a difference. If that fails, that should be covered under warranty.
__________________
|
05-28-2016, 04:10 PM | #3 |
Drives: 2015 1LE Join Date: Dec 2015
Location: Windermere, Florida
Posts: 36
|
I washed the specific wheel 3 times and no luck, ill get some pics to post.
|
05-28-2016, 04:24 PM | #4 |
Drives: 2015 1LE Join Date: Dec 2015
Location: Windermere, Florida
Posts: 36
|
|
05-28-2016, 04:50 PM | #5 |
Drives: 2010 Camaro SS Victory Red Join Date: Apr 2015
Location: Rosenberg, Texas
Posts: 780
|
Lookings like one rim was acid washed???
__________________
Speed Engineering Headers w/ Texas Speed HFC's ~ Flowmaster 2 1/2" cat back w/Flowmaster Super 10's ~ Cold Air Inductions Intake w/ Scoop and WW relocate ~ VMAX CNC Spiral PTB ~ Cross Drilled and Slotted Rotors w/Hawk pads ~ ZL1 Spoiler ~ SCTX4 RDP Tuned
|
05-28-2016, 04:57 PM | #6 |
Drives: 2011 2SS/RS IOM/PEARL STRIPES-6M Join Date: Mar 2011
Location: DFW
Posts: 151
|
Are you using an over the counter spray on type wheel cleaner?
__________________
Whipple S/C, 3.750 pulley, JRE rough idle blower cam kit, Trunion upgrade, C5R timing chain, LS2 chain dampner, Melling 10296, Dynatech 1 7/8 LT headers, OR pipes, Dual valve RX catch can, ID 850 Injectors, LPE Dual fuel pump, CAI with Apex scoop, VMax ported T/B, ADM Tune 675 RWHP 560 TQ
|
05-28-2016, 05:38 PM | #7 |
Drives: 2015 1LE Join Date: Dec 2015
Location: Windermere, Florida
Posts: 36
|
I just fill up a separate bucket and use regular Meguiars wash mix, all the other wheels come out like brand new.
|
05-28-2016, 06:12 PM | #8 |
Tri-County Camaro SWFL
|
Something was sprayed on the rim that took the paint off. Either get it repainted, take it to the dealership or find a rear set off the classified section.
__________________
|
05-28-2016, 06:28 PM | #9 |
Ret AF, cancer survivor
Drives: 2013 Camaro 2SS/RS & 2006 Corvette Join Date: Jul 2015
Location: Mesquite, NV
Posts: 2,741
|
I was thinking the same thing, looks like the wheel was sprayed with something. I'd get it repainted.
__________________
|
05-28-2016, 06:29 PM | #10 |
Drives: 2015 1LE Join Date: Dec 2015
Location: Windermere, Florida
Posts: 36
|
I'm going to take it to the dealership, i have no idea what could have done it?
|
05-28-2016, 06:37 PM | #11 |
Why not try some wax on it first?
|
|
05-28-2016, 09:00 PM | #12 |
Drives: 2SS/RS Join Date: Sep 2008
Location: Western North Carolina
Posts: 7,225
|
Are you using store bought tire shine by chance? Some will eventually eat through the clear coat on painted rims and cause a dull look if left on the rim and not wiped off asap.
|
05-29-2016, 01:53 AM | #13 |
Drives: 2013 ZL1 M6 Join Date: Oct 2013
Location: Nor Cal
Posts: 1,825
|
Try claying it first. If it does not come back then the clear has been eaten away.
I still see a ton of brake dust on both wheels. |
05-29-2016, 07:17 AM | #14 |
old school chevy rodder
Drives: 2013 2SS/RS Manual,DM exhaust,CRT Join Date: Jul 2012
Location: Oregon
Posts: 5,592
|
Lack of clear on one wheel?
__________________
2021 Wild Cherry ZL1 A10, Sunroof, Data,Red Carbon Interior, Nav, RotoFab Big Gulp , Elite x2ultra, Borla ATAK, Driveshaft shop, full BMR susp, Speed eng. valve covers, intercoolers, ATI , 2650 MAG, DSX lid, 103 NW, JBA shorties, Lingenfelter check, 1le wheels, spoiler and diveplanes, PCV, Big3racing ice tank, [SIGPIC]etc....
|
|
|
|
|