You are browsing camaro5 
 |
|
05-31-2016, 10:13 AM
|
#1 |
 
Drives: 2012 camaro 1LS. M6 Join Date: Sep 2012
Location: Lithopolis OHIO
Posts: 512
|
Wrapping my hood
I would like to wrap my hood I'm just curious how hard it be to do has anybody done it themselves
__________________
Mods..mrt v2. Cai intake v max throttle body. 20% windo tint & RX catch can Gianna 20in rims nitto 555 & afterburner tail lights RS halo head lights & gm heat extractor 4 pack gauges & panted heritage Grille & zl1rear sproler t5 splitter custom head rest
|
|
|
|
05-31-2016, 10:44 AM
|
#2 |
 
Drives: 2012 Camaro 1LS w/L99/TR6060 Join Date: Dec 2012
Location: Memphis, Tn
Posts: 267
|
Not hard at all. I would suggest you have an extra set of hands to pull vinyl tight. And a hairdryer will do the job to help stretch around edges and to pull out any wrinkles descending on material you're using.
 This would help you smooth vinyl as you lay. Or a creditcard but that may scratch vinyl. L99/TR6060 1LS swap in the making. |
|
|
|
|
05-31-2016, 11:58 AM
|
#3 |
|
Drives: 2012 camaro 1LS. M6 Join Date: Sep 2012
Location: Lithopolis OHIO
Posts: 512
|
Thanks. hopefully it works out me
__________________
Mods..mrt v2. Cai intake v max throttle body. 20% windo tint & RX catch can Gianna 20in rims nitto 555 & afterburner tail lights RS halo head lights & gm heat extractor 4 pack gauges & panted heritage Grille & zl1rear sproler t5 splitter custom head rest
|
|
|
|
|
05-31-2016, 09:32 PM
|
#4 |
 
|
Get one of those Plastic things with the soft material, will be very helpful as credit card, will probably cause damage. also, a sharp razor blade, to cut the excess off, nice and clean!
Good Luck :-) |
|
|
|
|
06-01-2016, 06:42 PM
|
#5 |
 Drives: 2ss/rs Join Date: Apr 2016
Location: space
Posts: 334
|
are you doing carbon fiber
|
|
|
|
|
06-01-2016, 07:30 PM
|
#6 |
|
Drives: 2012 camaro 1LS. M6 Join Date: Sep 2012
Location: Lithopolis OHIO
Posts: 512
|
Yes That's my plan
__________________
Mods..mrt v2. Cai intake v max throttle body. 20% windo tint & RX catch can Gianna 20in rims nitto 555 & afterburner tail lights RS halo head lights & gm heat extractor 4 pack gauges & panted heritage Grille & zl1rear sproler t5 splitter custom head rest
|
|
|
|
|
06-02-2016, 08:59 AM
|
#7 |
 
|
I would use 3M Primer 94 on the edges. Also. you need to post heat the wrap especially on the edges so it looses its memory. I post heat to 180-200 degrees using a laser thermometer and heat gun.
__________________
 |
|
|
|
|
06-02-2016, 09:07 AM
|
#8 |
|
Drives: 2ss/rs Join Date: Apr 2016
Location: space
Posts: 334
|
you doing 3D CARBON FIBER OR THE 4D CARBON FIBER.. if you do the 4D fiber let me know i have done it before and can tell you what not to do with it
|
|
|
|
|
06-02-2016, 12:35 PM
|
#9 |
|
Drives: 2012 camaro 1LS. M6 Join Date: Sep 2012
Location: Lithopolis OHIO
Posts: 512
|
I was thinking about 3d..my only concern is I have a heat extractor & I'm concerned about the wrap being cut ware I cut out the hood ..maybe dubbing up in that area
__________________
Mods..mrt v2. Cai intake v max throttle body. 20% windo tint & RX catch can Gianna 20in rims nitto 555 & afterburner tail lights RS halo head lights & gm heat extractor 4 pack gauges & panted heritage Grille & zl1rear sproler t5 splitter custom head rest
|
|
|
|
|
06-02-2016, 01:32 PM
|
#10 | |
|
|
Quote:
__________________
|
|
|
|
|
|
06-02-2016, 02:18 PM
|
#11 | |
|
Drives: 2012 Camaro 1LS w/L99/TR6060 Join Date: Dec 2012
Location: Memphis, Tn
Posts: 267
|
Quote:
You could wrap over extractor, heat edges and tuck with a card then cut inside under edges with exacto knife or something similar. |
|
|
|
|
|
06-02-2016, 07:15 PM
|
#12 |
|
Drives: 2012 camaro 1LS. M6 Join Date: Sep 2012
Location: Lithopolis OHIO
Posts: 512
|
I just need to do more research before I start
__________________
Mods..mrt v2. Cai intake v max throttle body. 20% windo tint & RX catch can Gianna 20in rims nitto 555 & afterburner tail lights RS halo head lights & gm heat extractor 4 pack gauges & panted heritage Grille & zl1rear sproler t5 splitter custom head rest
|
|
|
|
|
06-03-2016, 04:30 AM
|
#13 |
Drives: 2018 ZLE Join Date: Jul 2014
Location: Ontario, Canada
Posts: 580
|
vent should be easiest part. Just take it out when you do it and voila
|
|
|
|
|
06-03-2016, 08:03 AM
|
#14 |
|
|
Hood Wrap
Remove the heat extractor first. Just takes minutes
|
|
|
|
|
|
|
|
 |
|
|
