Help picking a splitter - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

HAMBO · 07-18-2016, 10:30 PM

Hi everyone,

Thinking about adding a splitter to my ride. Was looking at this SLP style one on eBay, which I think looks pretty nice, but I may have an appetite for something a bit more aggressive (though probably not quite Z/28 aggressive).

Any recommendations? Picture of my car is below. Also appreciate any pics, particularly of AGM, if available!

Second question - Is it important to add air deflectors when adding a splitter?

Thanks!

SS PANTHER · 07-20-2016, 01:31 AM

Hi Hambo,
Looking good. I just bought the $124 eBay splitter myself and received it last week. I am going to try this one and see how it holds up first at this cost. I am concerned about ground clearance due to our ingress/egress situations. I think the SLP style is the cleanest looking and RPI makes one that is similar, but, slightly more aggressive looking. It sticks out further and you can get it painted to your liking for about $300.

BAD DAB · 07-20-2016, 09:24 AM

Here's a pic of my SLP chin spoiler.

SS PANTHER · 07-20-2016, 06:12 PM

Looks good Dab. Clean looking SS.

BAD DAB · 07-20-2016, 08:41 PM

Quote:

Originally Posted by SS PANTHER

Looks good Dab. Clean looking SS.

Thanks PANTHER, I took that shot at Camarofest in Kentucky last year.

HAMBO · 07-20-2016, 09:29 PM

Thanks SS_PANTHER, bet it will look great when it's on! Yes, worried a bit about ground clearance since I'd like to drop my ride height a bit later this summer.

Nice pics Dab, looking good! Does it scratch often?

BAD DAB · 07-21-2016, 11:28 AM

Quote:

Originally Posted by HAMBO

Thanks SS_PANTHER, bet it will look great when it's on! Yes, worried a bit about ground clearance since I'd like to drop my ride height a bit later this summer.

Nice pics Dab, looking good! Does it scratch often?

Thanks HAMBO. No it doesn't scratch. (Just don't curb it) Its pretty durable. I'm not lowered, but I make sure that I back into my parking spots.

olblue75 · 07-21-2016, 01:36 PM

Factory 1LE but they are pricey.

1JEWLDSSRS · 07-28-2016, 07:09 PM

I have the ZL1 replica from RPI designs and I am lowered 1.25, no issues, just be aware..

SS-E-YA · 07-30-2016, 04:32 PM

Quote:

Originally Posted by 1JEWLDSSRS

I have the ZL1 replica from RPI designs and I am lowered 1.25, no issues, just be aware..

I like this one.

BluePhoenix · 07-31-2016, 09:10 AM

Factory 1LE & the Painted RPI look nice for a more custom look.

1JEWLDSSRS · 08-02-2016, 06:01 PM

Quote:

Originally Posted by SS-E-YA

I like this one.

Thanks, yea I bought this one about 3 years ago from them and the price is still the same. It is fiberglass and is a very sturdy piece and the fit was spot on. And I have had many compliments on it. Nice addition.

Aero_Sport_Concepts · 08-02-2016, 10:06 PM

Quote:

Originally Posted by HAMBO

Hi everyone,

Thinking about adding a splitter to my ride. Was looking at this SLP style one on eBay, which I think looks pretty nice, but I may have an appetite for something a bit more aggressive (though probably not quite Z/28 aggressive).

Any recommendations? Picture of my car is below. Also appreciate any pics, particularly of AGM, if available!

Second question - Is it important to add air deflectors when adding a splitter?

Thanks!

We are working on a Splitter Extension Kit for your SS '10-'13. This kit will not need the Factory Splitter like most of our other Kits use. Should have a design in a few weeks. Similar to these.

Sent from my XT1585 using Tapatalk

TRC-SS · 08-02-2016, 10:21 PM

APR Splitter!!!!

07-18-2016, 10:30 PM	#1
HAMBO Drives: Supercharged 2013 AGM 2SS/RS Join Date: Oct 2013 Location: Los Angeles, CA Posts: 786	Help picking a splitter Hi everyone, Thinking about adding a splitter to my ride. Was looking at this SLP style one on eBay, which I think looks pretty nice, but I may have an appetite for something a bit more aggressive (though probably not quite Z/28 aggressive). Any recommendations? Picture of my car is below. Also appreciate any pics, particularly of AGM, if available! Second question - Is it important to add air deflectors when adding a splitter? Thanks! __________________ 2013 AGM 2SS/RS SLP TVS2300, Edge CAI, 3" Magnaflow catback, BC Racing BR series coilovers, HRE FF15's (20x10 square) with Michelin Pilot Sport 4S's, GM STB, BMR front and rear sway bars and toe links, Prothane subframe bushings and front control arm inserts, JDP rear upper control arm bushings, Elite Engineering catch can. Tuned by Cunningham Motorsports. 1967 Bolero Red 396 SS/RS Convertible

07-20-2016, 09:24 AM	#3
BAD DAB Drives: 2010 Camaro 2SS/RS Black & Silver Join Date: Aug 2010 Location: Richmond, VA Posts: 8,230 View My Garage	Here's a pic of my SLP chin spoiler. Attached Images __________________ STAINLESS WORKS HEADERS-TUNED BY JANNETTY RACING-C.A.I. INTAKE-TAYLOR 409 WIRES-SOLO AXLE BACK EXHAUST-ELITE CATCH CAN

07-20-2016, 09:29 PM	#6
HAMBO Drives: Supercharged 2013 AGM 2SS/RS Join Date: Oct 2013 Location: Los Angeles, CA Posts: 786	Thanks SS_PANTHER, bet it will look great when it's on! Yes, worried a bit about ground clearance since I'd like to drop my ride height a bit later this summer. Nice pics Dab, looking good! Does it scratch often? __________________ 2013 AGM 2SS/RS SLP TVS2300, Edge CAI, 3" Magnaflow catback, BC Racing BR series coilovers, HRE FF15's (20x10 square) with Michelin Pilot Sport 4S's, GM STB, BMR front and rear sway bars and toe links, Prothane subframe bushings and front control arm inserts, JDP rear upper control arm bushings, Elite Engineering catch can. Tuned by Cunningham Motorsports. 1967 Bolero Red 396 SS/RS Convertible

07-21-2016, 01:36 PM	#8
olblue75 Drives: 2010 2SS/RS Join Date: Dec 2009 Location: Clarksville Tennesse. Posts: 6,157	Factory 1LE but they are pricey. __________________ Orange Krush II 1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components.

07-28-2016, 07:09 PM	#9
1JEWLDSSRS Drives: 2011 SS-RS Join Date: May 2011 Location: FLORIDA Posts: 14,119	I have the ZL1 replica from RPI designs and I am lowered 1.25, no issues, just be aware.. __________________ TSP STAGE 3 CAM,231/246 @112 LSA 614/641 LIFT, CIRCLE D 5C-4200-4500 CONVERTER,LOD INTAKE.CORSA EXHAUST. DSS 1 PC DS. PEGASUS SOLID CRADLE MOUNTS. 486RWHP/475RWTQ.LOTS MORE.

07-20-2016, 01:31 AM	#2
SS PANTHER Drives: 2013 SS Supercharged Convertible Join Date: May 2013 Location: SoCal Posts: 2,713	Hi Hambo, Looking good. I just bought the $124 eBay splitter myself and received it last week. I am going to try this one and see how it holds up first at this cost. I am concerned about ground clearance due to our ingress/egress situations. I think the SLP style is the cleanest looking and RPI makes one that is similar, but, slightly more aggressive looking. It sticks out further and you can get it painted to your liking for about $300.

07-20-2016, 06:12 PM	#4
SS PANTHER Drives: 2013 SS Supercharged Convertible Join Date: May 2013 Location: SoCal Posts: 2,713	Looks good Dab. Clean looking SS.

07-31-2016, 09:10 AM	#11
BluePhoenix Drives: 23 Camaro 2SS 1LE Join Date: Jul 2013 Location: Hanover, PA Posts: 3,374	Factory 1LE & the Painted RPI look nice for a more custom look. __________________ 2023 Camaro 2SS 1LE, A10, Summit White, 1100 - 3/23/2023 2000 - 3/27/2023 3000 - 3/28/2023 3000 - 4/04/2023 — 4/24 TPW 3400 - 4/12/2023 — 4/24 TPW 3800 - 4/28/2023 - Delayed ETA VIN: 1G1FH1R73P0145237 5/10/2023 - ETA 5/27/2023 5000 - 5/30/2023 6000 - 6/3/2023 2024 GMC Sierra 1500

08-02-2016, 10:21 PM	#14
TRC-SS 700RWHP-650TQ Drives: 2011 Forged LS3 Supercharged/Cammed Join Date: Aug 2010 Location: Shrewsbury Massachusetts Posts: 5,269 View My Garage	APR Splitter!!!! __________________ View Build HERE>>>>>MY 2011 2SS/RS JOURNAL