Where to get LS3 NGK Plugs, Ignition wires? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Jeanius · 10-10-2009, 11:33 PM

Has anyone installed some NGK or other high end plugs and high end wires?

Have not been able to track down plugs, I saw that MTI has some wires, but I want to see all my options, if there are any

Jferrell88 · 10-11-2009, 12:49 AM

i was wondering if anyone had installed ngk's

Jeanius · 10-12-2009, 12:09 AM

bump

ADM PERFORMANCE · 10-12-2009, 09:21 AM

We have them in stock.

TR7,TR6,TR55,TR5 AVAILABLE!

Do your self a favor and keep stock wires.

Andy

rodimus prime · 10-12-2009, 09:23 AM

For stock just get some NGK TR55 or some bone stock AC Delcos. Forget the junk that comes in our motors.

You should be able to get them at Autozon/Pep Boys/ Oreillys/ Advanced Auto/ Car Quest/ Napa ect ect.

FYI the NGKs only last about 20k.

Jeanius · 10-12-2009, 11:05 AM

Quote:

Originally Posted by ADM PERFORMANCE

We have them in stock.

TR7,TR6,TR55,TR5 AVAILABLE!

Do your self a favor and keep stock wires.

Andy

Im planning for long tubes and a tune, I was told by my tuner I should get Plugs/Wires/Thermostat

You still think i should stick with stock wires?

rodimus prime · 10-12-2009, 11:15 AM

Stock wires are fine. If you need to get wires I would go with Taylor, but for just bolt-ons your not going to have any benifit of new wires.

IPS Brandon · 10-12-2009, 01:50 PM

Quote:

Originally Posted by Jeanius

Im planning for long tubes and a tune, I was told by my tuner I should get Plugs/Wires/Thermostat

You still think i should stick with stock wires?

Your tuner is spot on, for the best results you can use these products.

NGK TR55 copper plugs - http://www.ipsmotorsports.net/produc...oducts_id=2903

MSD 8.5mm super conductor wires - http://www.ipsmotorsports.net/produc...oducts_id=2897

160 degree thermostat - http://www.ipsmotorsports.net/produc...oducts_id=3704

Regards (everything ships free as well)

brandotron · 10-12-2009, 01:52 PM

Quote:

Originally Posted by rodimus prime

For stock just get some NGK TR55 or some bone stock AC Delcos. Forget the junk that comes in our motors.

You should be able to get them at Autozon/Pep Boys/ Oreillys/ Advanced Auto/ Car Quest/ Napa ect ect.

FYI the NGKs only last about 20k.

Really? My TR55's have been in there for about 30k without issue. I hope you didn't jinx my plugs.

rodimus prime · 10-12-2009, 01:55 PM

Quote:

Originally Posted by brandotron

Really? My TR55's have been in there for about 30k without issue. I hope you didn't jinx my plugs.

LOL, commonly about 20k is where they should be changed out. They are a whopping $2.00 each. I changed them every 5,000 on my H/C ls1 to stay on the safe side.

2Tightwads · 10-12-2009, 01:56 PM

Truth is the stockers are amazing already and literally NOT necessary to upgrade...but if you are so inclined to spend $'s...

Recommended combination: NGK TR-55's Plugs & Taylor Race Pro Wires...Much nicer than the MSD's in my opinion.

POWERFREAK · 10-12-2009, 02:03 PM

Quote:

Originally Posted by 2Tightwads

Truth is the stockers are amazing already and literally NOT necessary to upgrade...but if you are so inclined to spend $'s...

Recommended combination: NGK TR-55's Plugs & Taylor Race Pro Wires...Much nicer than the MSD's in my opinion.

do you have a part # for the taylor's? Gonna install LT's soon, figure better wires would be a good idea (hold up to the heat better).

Andro · 10-12-2009, 02:06 PM

Got NGK's in my 'maro

Jeanius · 10-12-2009, 04:26 PM

Quote:

Originally Posted by IPS Brandon

Your tuner is spot on, for the best results you can use these products.

NGK TR55 copper plugs - http://www.ipsmotorsports.net/produc...oducts_id=2903

MSD 8.5mm super conductor wires - http://www.ipsmotorsports.net/produc...oducts_id=2897

160 degree thermostat - http://www.ipsmotorsports.net/produc...oducts_id=3704

Regards (everything ships free as well)

Is that MSD kit specific for the LS3 or universal?

10-10-2009, 11:33 PM	#1
Jeanius Drives: Blk/Blk 2018 Sierra SLT Join Date: Dec 2006 Location: Golden State Posts: 2,925	Where to get LS3 NGK Plugs, Ignition wires? Has anyone installed some NGK or other high end plugs and high end wires? Have not been able to track down plugs, I saw that MTI has some wires, but I want to see all my options, if there are any

10-11-2009, 12:49 AM	#2
Jferrell88 Drives: black 2ss/rs Join Date: Oct 2008 Location: Proctorville, OH Posts: 751 View My Garage	i was wondering if anyone had installed ngk's __________________

10-12-2009, 09:21 AM	#4
ADM PERFORMANCE Drives: Anything I want Join Date: Oct 2008 Location: DfW - Texas Posts: 5,407	ADM Performance has them We have them in stock. TR7,TR6,TR55,TR5 AVAILABLE! Do your self a favor and keep stock wires. Andy

10-12-2009, 02:06 PM	#13
Andro NOICE!!! ™ Drives: Force Fed 427 Join Date: Jan 2009 Location: GOT BOOST? Posts: 5,213 View My Garage	Got NGK's in my 'maro __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
LS3 engine specifications	Tran	Wiki	3	10-06-2010 11:56 PM
LS3 Specs revealed: GM's 436hp Sick 6.2L LS3	TAG UR IT	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	28	07-30-2009 07:02 PM
Check your Order here	bvonscott	Camaro Price \| Ordering \| Tracking \| Dealers Discussions	665	06-29-2009 02:00 PM
LS3 spark plugs	restodaveny	Mechanical Maintenance: Break-in / Oil & Fluids / Servicing	8	05-18-2009 12:36 PM
5th Gen Camaro LS3 info from Chevy Hi-Po...READ	TAG UR IT	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	295	03-07-2008 11:06 AM

10-12-2009, 12:09 AM	#3
Jeanius Drives: Blk/Blk 2018 Sierra SLT Join Date: Dec 2006 Location: Golden State Posts: 2,925	bump

10-12-2009, 09:23 AM	#5
rodimus prime Account Suspended Drives: Cargo van. Join Date: Jul 2009 Location: Metal Metal Land Posts: 1,247	For stock just get some NGK TR55 or some bone stock AC Delcos. Forget the junk that comes in our motors. You should be able to get them at Autozon/Pep Boys/ Oreillys/ Advanced Auto/ Car Quest/ Napa ect ect. FYI the NGKs only last about 20k.

10-12-2009, 11:15 AM	#7
rodimus prime Account Suspended Drives: Cargo van. Join Date: Jul 2009 Location: Metal Metal Land Posts: 1,247	Stock wires are fine. If you need to get wires I would go with Taylor, but for just bolt-ons your not going to have any benifit of new wires.

10-12-2009, 01:56 PM	#11
2Tightwads Banned Drives: 2002 LS1 swapped into a 1994 Z Join Date: Sep 2009 Location: San Antonio, TX Posts: 386	Truth is the stockers are amazing already and literally NOT necessary to upgrade...but if you are so inclined to spend $'s... Recommended combination: NGK TR-55's Plugs & Taylor Race Pro Wires...Much nicer than the MSD's in my opinion.