You are browsing camaro5 
 |
|
10-24-2016, 07:53 AM
|
#1 |
 Drives: 2010 Chevy Camaro 2LT V6 Join Date: Feb 2016
Location: Raleigh, NC
Posts: 22
|
Remote start not working No CEL
Hey guys I got a 2010 camaro 2lt. The remote start stopped working. The lights flash and I hear a click from under the hood. The remote start is enabled in the config menu. There is no CEL's and all doors / hood / truck are closed. Please help thank you
|
|
|
|
10-24-2016, 11:35 AM
|
#2 |
|
376 cubic inches of fun
|
If you are not in Park, or the ECM doesn't think you are in Park, remote start will not work.
If you accelerator pedal is not at zero, same thing. |
|
|
|
|
10-24-2016, 04:21 PM
|
#3 |
|
Drives: 2010 Chevy Camaro 2LT V6 Join Date: Feb 2016
Location: Raleigh, NC
Posts: 22
|
I'm in park, gear selector says p. Gas pedal is at zero as far as I can tell (not idling high) and break pedal is at zero (no brake lights on). I tried reclosing the hood and trunk and lid but that didn't work. Please any other suggestions? Thanks
|
|
|
|
|
10-24-2016, 04:36 PM
|
#4 |
|
376 cubic inches of fun
|
Assuming your fob is otherwise working, I don't have any other ideas. Either see the dealer or just give up on remote start.
Afterthought: do you have a tune or some gadget that re-maps your accelerator pedal? |
|
|
|
|
10-24-2016, 04:40 PM
|
#5 |
|
Drives: 2010 Chevy Camaro 2LT V6 Join Date: Feb 2016
Location: Raleigh, NC
Posts: 22
|
No tune or anything... I just installed a CAI a couple weeks ago from Vararam
|
|
|
|
|
11-08-2016, 06:16 PM
|
#6 |
|
Drives: 2010 Chevy Camaro 2LT V6 Join Date: Feb 2016
Location: Raleigh, NC
Posts: 22
|
Bump anyone have any ideas? It worked the other day when the temps increased and it was 80° out. Now that the temps have dropped again still won't work. Iam baffeled.
|
|
|
|
|
11-09-2016, 01:22 AM
|
#7 |
|
Drives: 2014 camaro convertible rs Join Date: Jul 2016
Location: Defiance ohio
Posts: 29
|
check the hood switch
have a 15 Silverado animal chewed the wiring to the hood latch switch |
|
|
|
|
11-10-2016, 06:49 PM
|
#8 |
    
Drives: 2010 2ss ss/rs abm, 2016 2ss/rs hbm Join Date: Feb 2009
Location: N. Phx, Az
Posts: 1,332
|
You need access to GDS2 and look at the Remote Start Disable History. That will tell you exactly what is going on. Otherwise you are just shooting blindly.
__________________
URR2SLO - If you're not going fast enough, get out the way......
|
|
|
|
|
|
|
|
 |
| Tags |
| remote, start |
|
|
