Lug nuts for staggered Rohanna - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

JWade · 03-25-2017, 11:16 AM

I had a set of RC7, 20x9/10, installed recently. The rear lugs on the 10s are flush with the face of the wheel, but the lugs for the front 9s are inset about a half inch or so, enough that you cant see them standing by the wheel. My understanding is that is how the wheels are designed betweeen the 9s and 10s. Can i simply purchase a longer set of lug nuts for the front to even it out and make the fronts flush with the surface? Any recommendations? Thanks in advance. Need to be the thin diameter type, OEM do not fit.

PK Auto Design · 03-25-2017, 11:45 AM

Thats just how they are because of the backpad brotha. You can get longer lugs upfront just make sure they are tuner lugs.

JWade · 03-25-2017, 01:42 PM

Thanks, yes, i was looking for recommendations on a brand and length of lug nut to use for the fronts. Just tuner extended length 14x1.5mm for the fronts and standard length tuner 14x1.5mm for the rear?

Outlaw77 · 03-28-2017, 02:45 PM

I have RC7's and they should be about flush in both the front and rear. I think you might have all of the same size lugs. I think the rears should be a bit longer than the fronts.

PK Auto Design · 03-28-2017, 02:47 PM

due to the concave the rear pokes out a bit yes but they should all be about 1.38" or so in length no reason to change them out and have different length fronts and rears.

03-25-2017, 11:16 AM	#1
JWade Drives: 2014 Camaro SS/RS, L99 Join Date: Feb 2011 Location: Katy, Texas Posts: 37	Lug nuts for staggered Rohanna I had a set of RC7, 20x9/10, installed recently. The rear lugs on the 10s are flush with the face of the wheel, but the lugs for the front 9s are inset about a half inch or so, enough that you cant see them standing by the wheel. My understanding is that is how the wheels are designed betweeen the 9s and 10s. Can i simply purchase a longer set of lug nuts for the front to even it out and make the fronts flush with the surface? Any recommendations? Thanks in advance. Need to be the thin diameter type, OEM do not fit. __________________ 2014 Camaro SS, L99 MBRP catback, CAI cai, Stainless Power LTs HFCs, tuned by KP Racing, Rohana RC7's, Z28 spoiler.

03-25-2017, 01:42 PM	#3
JWade Drives: 2014 Camaro SS/RS, L99 Join Date: Feb 2011 Location: Katy, Texas Posts: 37	Thanks, yes, i was looking for recommendations on a brand and length of lug nut to use for the fronts. Just tuner extended length 14x1.5mm for the fronts and standard length tuner 14x1.5mm for the rear? __________________ 2014 Camaro SS, L99 MBRP catback, CAI cai, Stainless Power LTs HFCs, tuned by KP Racing, Rohana RC7's, Z28 spoiler.

03-25-2017, 11:45 AM	#2
PK Auto Design Drives: 2017 Chevrolet SS 1LE Join Date: Oct 2016 Location: Los Angeles, California Posts: 9,269	Thats just how they are because of the backpad brotha. You can get longer lugs upfront just make sure they are tuner lugs.

03-28-2017, 02:45 PM	#4
Outlaw77 Drives: 2018 Charger SRT 392 F8 Green Join Date: Aug 2010 Location: Oakville Ontario, Canada Posts: 1,910	I have RC7's and they should be about flush in both the front and rear. I think you might have all of the same size lugs. I think the rears should be a bit longer than the fronts.

03-28-2017, 02:47 PM	#5
PK Auto Design Drives: 2017 Chevrolet SS 1LE Join Date: Oct 2016 Location: Los Angeles, California Posts: 9,269	due to the concave the rear pokes out a bit yes but they should all be about 1.38" or so in length no reason to change them out and have different length fronts and rears.