Rear Wheel Well Liner Removal - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

redleader · 04-23-2017, 05:32 AM

Just a note to Me and those who follow ...

Remove the front two lower screws on the lower sill
Remove the 3 rear screws near the bumper panel
Remove the two press studs above the axle
Remove the top upper centre holder thing ... this unscrews BUT you have to gently pull at the same time ... not easy!... use a screw driver to get under the edges, wash with lubricant to release it a bit so it can unscrew more easily :-)

The trick then is to bend the rear facing side as it tends to trap itself and kink just where the real bumper fixing screws meet the car body panel :(

Good Luck !

04-23-2017, 05:32 AM	#1
redleader redleader Drives: 2010 Join Date: Mar 2012 Location: UK Posts: 2,202 View My Garage	Rear Wheel Well Liner Removal Just a note to Me and those who follow ... Remove the front two lower screws on the lower sill Remove the 3 rear screws near the bumper panel Remove the two press studs above the axle Remove the top upper centre holder thing ... this unscrews BUT you have to gently pull at the same time ... not easy!... use a screw driver to get under the edges, wash with lubricant to release it a bit so it can unscrew more easily :-) The trick then is to bend the rear facing side as it tends to trap itself and kink just where the real bumper fixing screws meet the car body panel :( Good Luck ! Last edited by redleader; 04-23-2017 at 05:33 AM. Reason: spelling typo's