0-60 Challenge - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Dezines · 07-28-2017, 08:20 PM

DV of Me and Mine TV issued an open challenge to Camaro owners to make a video if their 0-60 Times on youtube... Here is mine.

https://youtu.be/jmQOQZtBs8w

InFiD3ViL · 07-28-2017, 08:45 PM

I saw that.

Problem is that nobody will be on an even keel. He is not standardizing the measuring device.

The 1010-2012 model years did not come with the performance timers in the DIC like the later years. I told him about using something like DashCommand or Torque app, but many don't have that either. Also, it uses a combination of GPS and ECU to measure.

Times will wildly vary depending on how this is measured. Especially if you just use a stopwatch.

Gunmetal Speedster · 07-28-2017, 09:09 PM

Quote:

Originally Posted by InFiD3ViL

I saw that.

Problem is that nobody will be on an even keel. He is not standardizing the measuring device.

The 1010-2012 model years did not come with the performance timers in the DIC like the later years. I told him about using something like DashCommand or Torque app, but many don't have that either. Also, it uses a combination of GPS and ECU to measure.

Times will wildly vary depending on how this is measured. Especially if you just use a stopwatch.

Agreed. As one of the calloutee's, I'm having a hard time deciding how I would like to proceed. Especially since I sent my GoPro off to be refurbished/replaced.

TheFlyingBananaSS · 07-28-2017, 09:14 PM

Cool

STUNNAH · 07-29-2017, 02:32 AM

Pointless...

pyroguy · 07-29-2017, 08:32 AM

Look out Nick!! He's gonna get you!

Spurshot · 07-29-2017, 07:05 PM

Pud measuring.

chasmanian · 07-29-2017, 07:49 PM

All you guys are proving is that you didn't watch the video. It's not a challenge to see who's fastest. It's just a fun challenge between friends. He even calls out a zl1.

NC_SS · 07-29-2017, 09:11 PM

I think mine makes a little too much noise to do on regular roads

jrhagen · 07-29-2017, 09:31 PM

I can get my speedo from 0-60 in one second. Just step on the gas. Unfortunately, the car will be moving about 5mph.

spyderbuddy · 07-29-2017, 09:36 PM

I used my Torque App and got a 7.4 on my first try. but again it showed I had 400 Rear wheel Horse power, so i know something is wrong with the app.

Moto-Mojo · 07-29-2017, 10:20 PM

Quote:

Originally Posted by InFiD3ViL

I saw that.

Problem is that nobody will be on an even keel. He is not standardizing the measuring device.

The 1010-2012 model years did not come with the performance timers in the DIC like the later years. I told him about using something like DashCommand or Torque app, but many don't have that either. Also, it uses a combination of GPS and ECU to measure.

Times will wildly vary depending on how this is measured. Especially if you just use a stopwatch.

That 1010 car from the 'Iron Age' was a sumbitch! That's when 'putting the hammer down' really meant something!

chasmanian · 07-29-2017, 11:37 PM

Quote:

Originally Posted by spyderbuddy

I used my Torque App and got a 7.4 on my first try. but again it showed I had 400 Rear wheel Horse power, so i know something is wrong with the app.

It looks like the way people are timing is just to record your speedometer and subtract the time stamps later from the video.

Sent from my SM-P600 using Tapatalk

InFiD3ViL · 07-30-2017, 09:08 AM

Quote:

Originally Posted by Moto-Mojo

That 1010 car from the 'Iron Age' was a sumbitch! That's when 'putting the hammer down' really meant something!

Hahaha, I didn't even realize I put that. Geeze.

07-28-2017, 08:20 PM	#1
Dezines Youtube Content Creator Drives: 2010 Camaro LS Join Date: Jun 2017 Location: Easton, PA Posts: 106 View My Garage	0-60 Challenge DV of Me and Mine TV issued an open challenge to Camaro owners to make a video if their 0-60 Times on youtube... Here is mine. https://youtu.be/jmQOQZtBs8w __________________ ---- Gregory Salvatore 2010 Camaro LS - Victory Red Mods Vararam Ram Air Intake DNA Motoring Long Tube Headers w/ Cat Delete Dynomax Race Bullet Mufflers Sequential Tail Lamps Custom Ghost Flame and Matte black Graphics Package Phantom Billet Grill DRL Delete Build Thread: https://goo.gl/qnNgCz Youtube Channel: http://sub.gregorysalvatore.com Website: www.gregorysalvatore.com

07-28-2017, 08:45 PM	#2
InFiD3ViL Drives: 2010 CGM 2SS/RS LS3 Swapped A6 Join Date: Sep 2016 Location: Spring Hill, FL Posts: 4,737	I saw that. Problem is that nobody will be on an even keel. He is not standardizing the measuring device. The 1010-2012 model years did not come with the performance timers in the DIC like the later years. I told him about using something like DashCommand or Torque app, but many don't have that either. Also, it uses a combination of GPS and ECU to measure. Times will wildly vary depending on how this is measured. Especially if you just use a stopwatch. __________________ 2010 CGM Camaro 2SS LS3 Swapped A6 - GPI LS3 SS1 .647/.638, (224/237, 112 +4, 7º overlap) on CamMotion 8620 core, BTR Platinum .660" Dual Spring kit w/titanium retainers, CHE bronze trunnion upgrade, stock heads milled @ .015, Melling HV 10296 oil pump, TSP 1-7/8" long tube headers (W/Catless Off-road Pipes), Corsa Xtreme 3" Catback, GPI Ported/Rod Mod Intake, Stage 2 Ported Throttle Body, Vararam OTR CAI, Mike Norris Gen 2 catch can + GM 1LE clean side separator, 160º thermostat - Megan Racing adjustable coilovers (lowered 1.75"), MRR M017 10/11" wheels-Tuned by Ryan @ GPI

07-28-2017, 09:14 PM	#4
TheFlyingBananaSS Evil Genius of Chevrolet Drives: 2017 Z06, 2019 XTS, 2013 SS Join Date: Feb 2017 Location: New York Posts: 3,262	Cool __________________ GPI SS2 VVT cam, ECS Novi 1500 supercharger, Corsa Extreme, Detroit Speed and BMR suspension, Circle D triple disc, Melling oil pump, LS2 chain tensioner, ATI 10% UD, DSX E85 kit, High Energy coils, BTR springs, LS2 Lifter trays, Titanium retainers, hardened push rods, FIC 1000 injectors, ZL1 pump, Mighty Mouse catch can, AEM gauges, Tial BOV, Richmond 3.91 gears, Custom gauge bezels, Speed Engineering headers, Stainless Works HF cats, DSX Aux pump, 710rwhp on E85.

07-29-2017, 02:32 AM	#5
STUNNAH "BEASTM*DE" Drives: 2013 ZL1 Black Join Date: Aug 2016 Location: Tennessee Posts: 1,655 View My Garage	Pointless... __________________ Vengeance Racing Stage 1 Kit 575rwhp, 569 rwtq... Rims powder coated gloss black...BFG'S Comp 2 A/S... Dual 10" Kicker Comp S Subs 1200w...

07-29-2017, 08:32 AM	#6
pyroguy Started#gottalovethatblue Drives: ABM #832 Join Date: Apr 2013 Location: GA Posts: 7,088 View My Garage	Look out Nick!! He's gonna get you! __________________ '10 Camaro 2SS/RS \| Aqua Blue #832 of 3,903 \| Silver Stripes Check out my build thread

07-29-2017, 07:05 PM	#7
Spurshot Drives: 2014 2SS blue Join Date: Jun 2016 Location: Socal Posts: 689	Pud measuring. __________________

07-29-2017, 07:49 PM	#8
chasmanian Drives: 2015 Camaro SS Join Date: Dec 2013 Location: Easton, PA Posts: 295 View My Garage	All you guys are proving is that you didn't watch the video. It's not a challenge to see who's fastest. It's just a fun challenge between friends. He even calls out a zl1.

07-29-2017, 09:11 PM	#9
NC_SS Drives: 2012 M6 Camaro SS (RIP) Join Date: Nov 2014 Location: Virginia Posts: 1,684	I think mine makes a little too much noise to do on regular roads __________________ Speed engineering 1 7/8 LTs, CAI inc Cold Air Intake, offroad connectors, Solo performance axle back with J pipes, tune, and in need of a driver mod LOL

07-29-2017, 09:31 PM	#10
jrhagen Banned Drives: Camaro Join Date: Mar 2013 Location: USA Posts: 2,701	I can get my speedo from 0-60 in one second. Just step on the gas. Unfortunately, the car will be moving about 5mph.

07-29-2017, 09:36 PM	#11
spyderbuddy Drives: 2010 RS Inferno Orange Metallic Join Date: Mar 2010 Location: Albany, Ga. Posts: 3,474 View My Garage	I used my Torque App and got a 7.4 on my first try. but again it showed I had 400 Rear wheel Horse power, so i know something is wrong with the app.