09-06-2017, 08:09 PM | #1 |
Drives: 2014 Camaro SS/RS, L99 Join Date: Feb 2011
Location: Katy, Texas
Posts: 37
|
2014 RS/SS, LED in Halo out ... replacement bulb?
One of the LED bulbs, on one side of my passenger side Halo is out. Seems odd, I thought LEDs would be more or less "lifetime" of car.
Has anybody replaced this? Based on another thread, it looks like it may require opening (baking) the headlights and replacing a board, but wasn't sure since that thread was about something else. Only 25K miles, possibly a warranty item?
__________________
2014 Camaro SS, L99
MBRP catback, CAI cai, Stainless Power LTs HFCs, tuned by KP Racing, Rohana RC7's, Z28 spoiler. |
11-19-2017, 11:07 AM | #2 |
Did you figure out what bulb you needed and the process of changing it out
|
|
11-21-2017, 09:20 AM | #3 |
Drives: 2014 2SS 1LE Join Date: Aug 2017
Location: Brownsburg, IN
Posts: 2
|
I have this same problem on my '14 2SS/RS 1LE. Curious if anyone has a fix other than replacing the headlight assembly...
|
11-21-2017, 11:07 AM | #4 |
Drives: 2014 2LT RS Join Date: Sep 2013
Location: San Diego
Posts: 282
|
I would really assume this is covered in the warranty..
|
11-22-2017, 06:11 PM | #5 |
Drives: 2014 2SS 1LE Join Date: Aug 2017
Location: Brownsburg, IN
Posts: 2
|
Unfortunately, my warranty was up in August. Any ideas from others?
|
11-25-2017, 10:50 PM | #6 |
Drives: 2014 Camaro SS/RS, L99 Join Date: Feb 2011
Location: Katy, Texas
Posts: 37
|
No, unfortunately.
__________________
2014 Camaro SS, L99
MBRP catback, CAI cai, Stainless Power LTs HFCs, tuned by KP Racing, Rohana RC7's, Z28 spoiler. |
11-27-2017, 12:12 AM | #7 |
BUMBL Z
|
Ask Gen5DIY, this is something they would probably know about
__________________
Sold: 2015 ZL1 M6, Rotofab Intake, LS3 throttle body, 2.55 Upper/9.17 Lower, Custom Camshaft, DMS Reinforced Brick, ID1050X, 1 7/8" Headers, ProSpeed HX/Reservoir, DSX Aux Pump/Flex Fuel Sensor, E85, McLeod RXT, BMR 1" Drop, 680rw 93/750rw E85, Tuned by CSP
Sold: 2010 2SS, some bolt ons, 415rwhp/400rwtq |
12-05-2017, 08:40 AM | #8 |
Drives: 2014 2SS 1LE,RS,NPP,Recaros in SW Join Date: Apr 2012
Location: Sacramento
Posts: 401
|
It does require baking the headlight in the oven to soften the sealant. Then pry the lens off of the housing. You have to buy more sealant to close back up after replacing the LED board.
|
12-05-2017, 09:26 AM | #9 |
Instagram: Sangstah
|
That's a bummer, how many miles on the car? If you're going to take apart the headlight might as well upgrade to one of those RGB color halos from Oracle.
__________________
2019 SS 1LE - "CaSSandra" 2014 SS - "AleSSandra - Sold" 94 Z28 - Sold Follow the build https://www.camaro6.com/forums/showthread.php?t=612717 |
12-12-2017, 08:27 AM | #10 |
Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008
Location: By the lake in AZ
Posts: 15,719
|
You don't need to bake the headlight it can all be done from the rear with the cover removed.
|
|
|
|
|